1. ESTABLISHED : 1984 Quality Calibration Service, Inc.
“THE LEADER IN THE BUSINESS OF QUALITY”
A FULL SERVICE ISO IEC 17025:2005 (A2LA) Accredited METROLOGY LAB
ESTABLISHED : 1984
2014: New State Of The Art Metrology Facility

2. COMPANY HISTORY
Established : June 1984 : Hard Gage Calibration (10 x 10 Lab)
1986: Purchased 1st 4000 Sq. Ft Building/ Dimensional Insp.
November 1993: New 8500 Sq. Ft Building
December 1993: 1st Lab To Achieve Dual Accreditation A2LA & ISO 9002
1996: Electro-Mechanical Gage & Equipment Cal & Repair
1998: Building Expansion 1500 Sq. feet
August 2000: QCS Acquires Accurate Gage Co. & Adds SQ. Ft Dedicated Repair Center and 10 Employees
January 2014 Purchased and Moved to 20,000 Sq. Ft . State of the Art Facility in New Berlin, WI

3. LABORATORY ENVIRONMENT
With Technical capabilities second to none, QCS features dedicated state of the art labs for metrology services including: hard gage calibration, mechanical gage calibration and repair, electronic test and measurement equipment calibration and repair, and CMM first article dimensional inspection services.
Our environmentally controlled labs are continually monitored for fluctuations of humidity, temperature and dust to insure constant accuracy of our equipment, resulting in precise measurements of your gages. By utilizing the most sophisticated equipment available, you are assured minimal total measurement uncertainty.

4. One Stop Shopping For All Metrology Needs
Full Service State Of The Art Metrology Laboratories

5. “THE LEADER IN THE BUSINESS OF QUALITY”
HARD GAGE LAB
“THE LEADER IN THE BUSINESS OF QUALITY”
QCS is a full service Metrology Lab specializing in all phases of hard gage calibration. Our Hard Gage Lab is environmentally controlled at 68 Degrees F +/- 1 Degree F, with a maximum relative humidity of 45%.

6. HARD GAGE CAPABILITIES
Gage Blocks
Cylindrical Plug & Ring Gages
Threaded Plug & Ring Gages
Pin Gages
NPT-NPTF & ANPT Thread Gages
Micrometer Length Standards
Micrometer Masters / Kalmasters
Spline Gages
Thread Measuring Wires
Optical Flats
Snap Gages
Master Discs
Precision Balls
Parallels
And Other Misc. Hard Gages

7. CMM DIMENSIONAL INSPECTION
QCS specializes in CMM First Article dimensional inspection of manufactured, cast, rubber, or plastic molded parts on our certified (ANSI /ASME B89 Standard ) coordinate Measuring Machines.
Automotive approved Same day quotations
24 hour turn around (same day, if prescheduled)

8. DIMENSIONAL INSPECTION LAB CAPABILITIES
NIST traceability, compliance to all Military and Federal
Standards and Specifications
Inspection per ANSI Y14.5M DCC Drive utilizing ANSI standard
DMIS software
Zeiss Robotic Arm and Renishaw Indexable Probe Systems
Scanning / Scan to IGES
Reverse Engineering / Digitizing
Non-contact 3-axis video inspection
Complete capability studies, ISIR's, AND PPAP’S
Complete surface analysis capabilities
Complete turnkey inspection projects

9. MECHANICAL GAGE CALIBRATION & REPAIR
QCS offers complete repair and calibration of mechanical and electronic gaging and hand tools.

10. MECHANICAL GAGE CALIBRATION & REPAIR LAB
Micrometers
Dial and Vernier Calipers
Torque and Force Gages
Dial and Test Indicators
Height Gages and Height Masters
Pressure and Vacuum Gages
Dial and Digital Load Cells
Torque Testers, Watches, Screwdrivers, and Wrenches
Cable Tensiometers
And Other Misc. Hand Tools and Mechanical Gages

11. MECHANICAL GAGE CALIBRATION & REPAIR LAB
Cost Analysis Provided For All Repairs On Formal Quotations

12. ELECTRONIC TEST EQUIPMENT LAB
Electronics Lab
QCS offers a full range of calibration and repair services for electronic test and measurement equipment and the capability to repair a wide variety of electronic instruments and meters to component level.

13. ELECTRONICS LAB CAPABILITIES
Oscilloscopes
Multimeters
Frequency Counters
Capacitance Meters
Function Generators
Hypot Testers
Signal Generators
Sound Level Meters
Tachometers
Full Range of Other Misc. Electronic Test Equipment

14. FIELD SERVICE
Our fleet of Service Vans enables QCS to provide our customers with a full range of on-site calibration services.

15. FIELD SERVICE CAPABILITIES
Coordinate Measuring Machines
Optical Comparators
Hardness, Spring, and Tensile Testers
Microscopes
Electronic Test and Measurement Equipment
Scales
Super Mics
Granite Surface Plate Calibration & Resurfacing
Hand Tools (Torque, Mics, Calipers, Indicators, Pressure, etc.)
Surface Finish Analyzers
And More

16. Distributor For Most Major Gage and Hand Tool Manufacturers
OEM NEW GAGE /REPLACEMENT SALES
Distributor For Most Major Gage and Hand Tool Manufacturers
Vermont Gage

17. QCS GAGE COMPANY
We Sell New Replacement Gage Block Sets at One Third the Cost of Major Brands.
All Gage Block Sets Include an A2LA Accredited Long Form Certification.

18. Available at half the cost of most major brands!
QCS GAGE COMPANY
Available at half the cost of most major brands!
All New Gages include long form certifications traceable to N.I.S.T. at no extra cost.
Digital (w/ SPC Output) and Vernier Micrometers
New Replacement Digital (w/SPC output) Dial Calipers and Indicators

19. Information Technology
QCS Employs It’s Own IT Staff
QCS utilizes internally developed and maintained Software for all operational applications providing greater flexibility to better serve our customers
The QCS System encapsulates what other “canned” software cannot by being a “Live” system
Future enhancements and customer requirements easily incorporated
Electronic Quotations, PO’s, Invoices
QCS hosts our own web site. This allows us complete control and security over our Online Gage Management System (OGMS).

20. Information Technology Developments20
Information Technology Developments
QCS Online Gage Management System (OGMS)
Assign your own users and their rights
View your certifications within 24 Hrs of invoicing
Track your gages at any workstation with an internet connection
Download your measurement data
Gage Management without the worries of: license fees, setup, maintenance, backup, upgrades, administration costs, customization costs, disaster recovery, etc.
More effective than a “bar code” system and without the cumbersome bar codes
Future enhancements and customer requirements are easy to add

21. Information Technology Developments (OGMS)
SECURE LOG - IN

22. Information Technology Developments (OGMS)
HOME PAGE

23. Information Technology Developments (OGMS)
MESSAGE PAGE

24. Information Technology Developments (OGMS)
SEARCH SCREEN

25. Information Technology Developments (OGMS)
OVERDUE REPORT

26. GAGES FROM LAST INVOICE
Information Technology Developments (OGMS)
GAGES FROM LAST INVOICE

27. Information Technology Developments (OGMS)
ONLINE CERTIFICATES

28. Information Technology Developments (OGMS)
ON-LINE CERTIFICATES

29. What Separates QCS From The Competition ???
Customer Service
Technical Expertise
Competitive Pricing
Full Spectrum Of Capabilities With One Of The Largest Scopes of Accreditations Of Any Lab
Long Form Certificates Included With All
No Additional Cost
On Line Gage Management System
Continual Improvements & Technology Advancements

30. QCS Thanks You For Your Time…
QUALITY CALIBRATION SERVICE, INC.
QCS Thanks You For Your Time…