1. 310 Series Inline End Suction
AMP 101
Product Line
310 Series Inline End Suction

2. AMP 101 Product Features & Benefits
310 Series Inline End Suction (REI)
43 Models
2” to 14” Discharge
Flows to 9,000 GPM
Heads to 450 Feet
Temperatures to 250°F

3. AMP 101 Product Features & Benefits
310 Series Inline End Suction (REI)
33 Models
2” to 14” Discharge
Flows to 9,000 GPM
Heads to 450 Feet
Temperatures to 250°F
Back pull-out
Heavy wall section, centerline discharge casing
Integral foot on casing
Integral seal flush
Enclosed high efficiency impellers with back pump out vanes
Ground & polished 416 stainless steel shaft
Standard Carbon/Silicon-Carbide/EPDM mechanical seal
Standard front case wear rings, optional impeller wear rings
Hydraulically balanced impeller
Stocked C-Face motors

4. AMP 101 310 Series Standard Construction Options
Casing – Class 30 Cast Iron
Casing Adapter – Class 30 Cast Iron
Case Wear Ring(s) – C836 Bronze
Impeller – C952 Bronze
Shaft – 420 Stainless Steel
Shaft Sleeve – C836 Bronze
Mechanical Seal – Carbon/Silicon-Carbide/EPDM Elastomers
Options
Metallurgy – Ductile Iron, All Bronze, 316 Stainless Steel, Cd4MCu
Mechanical Seals – Materials and Type
Coatings – Enameled Casing or Impeller

5. AMP 101
310 Series Inline End Suction (REI)

6. AMP 101
310 Series Inline End Suction (REI)

7. REI – Close-Coupled Inline
AMP 101
310 Series REI Inline End Suction
REI – Close-Coupled Inline

8. AMP 101 300 Series REI Casing Adapter
All Models Flanged (1-14” Through 12” Discharge)
Heavy Wall Thickness & Generous Corrosion Allowance
Heavy Casted Dimensional 300# Flanges
All Models Use Studs In Lieu Of Capscrews
Tapped Flanges For Easy Connection of Piping
Cast Integral Base
Pump Model & Rotation Casted Base
Tapped Gage Connection on Suction & Discharge Flange
Heavy Duty Case Wear Ring
Casted Integral Vortex Suppressor on Suction
O-Ring Gasket
Register Fit Between Casing and Stuffing Box
Tapped Drain

9. AMP 101 300 Series REI Casing Adapter
Casing Adapter Has Integral Flush Line
Modular Design Allows for Sharing of Parts
16 Casing Adapters Are Used on 49 Casings
Register Fit Between Casing Adapter & Motor Bracket

10. AMP 101 300 Series REI Sleeve & Seal Heavy Wall Shaft Sleeve
Shaft Sleeve Has Integral Spring Collar
Inner Diameter O-Ring
Carbon Rotary Face Standard
Silicon-Carbide Stationary Face Standard
EPDM Elastomers Standard
Stainless Steel Hardware Standard

11. AMP 101 300 Series REI Impeller & Locknut
Heavy, Thick Shrouded Impellers For Durability
Francis Vane Impellers For Increased Efficiency
Back Pump Out Vanes Standard
Larger Impellers Are Hydraulically Balances
All Impellers Held In Place With Lock Washer & Nut

12. AMP 101 300 Series REI Shaft Assembly
REI Models Use stocked C-Face Motor
420 Stainless Steel Standard
Pump Unit Drives Off Of Motor Key
Multiple Set Screws Hold Axial Adjustment
C-Face Motors Stocked Worldwide
C-Face Design Allows Close-Coupling Through 300 HP
Wide Variety Of Motor Enclosures Available

13. AMP 101 310 Series Inline End Suction Aurora (380 Series)
Paco (VL Series)
Peerless (PV Series)
Crane Deming (3100 Series)
Weinman (CV Series)
Other Examples
Bell & Gossett (80 Series)

14. AMP 101
AMP REI Inline End Suction

15. AMP 101 Inline End Suction AMP (310 Series ‘REI’) Aurora (380 Series)
Flows to 9,000 GPM
Heads to 450 Feet TDH
Temperatures to 300°F
Aurora (380 Series)
Flows to 600 GPM
Heads to 170 Feet TDH
Temperatures to 250°F

16. AMP 101
Aurora 380 Inline End Suction

17. AMP 101
Aurora 380 Inline End Suction Comparison

18. AMP 101 Inline End Suction AMP (310 Series ‘REI’) PACO (VL Series)
Flows to 9,000 GPM
Heads to 450 Feet TDH
Temperatures to 300°F
PACO (VL Series)
Flows to 3,600 GPM
Heads to 400 Feet TDH
Temperatures to 250°F

19. AMP 101
PACO VL Inline End Suction

20. AMP 101
PACO VL Inline End Suction Comparison

21. AMP 101 Inline End Suction AMP (310 Series ‘REI’) Peerless (PV Series)
Flows to 9,000 GPM
Heads to 450 Feet TDH
Temperatures to 300°F
Peerless (PV Series)
Flows to 800 GPM
Heads to 300 Feet TDH
Temperatures to 225°F

22. AMP 101
Peerless PV Inline End Suction

23. AMP 101
Peerless PV Inline End Suction Comparison

24. AMP 101 Inline End Suction AMP (310 Series ‘REI’)
Flows to 9,000 GPM
Heads to 450 Feet TDH
Temperatures to 300°F
Crane Deming (3100 Series)
Flows to 1,000 GPM
Heads to 400 Feet TDH
Temperatures to 350°F

25. AMP 101
Crane Deming 3100 Inline End Suction

26. AMP 101
Crane Deming 3100 Inline End Suction Comparison

27. AMP 101 AMP 310 Series Inline End Suction Summary Wide Selection
Close Coupled Through 14” Discharge
Heavy Duty Design
Upgraded Mechanical Seal
Casted Integral Base
Service
Back Pull Out
Front Loading Seal