Download presentation
Published byWarren Ellis Modified over 7 years ago
1
Chapter 3 Chemical Reactions and Reaction Stoichiometry
Lecture Presentation Chapter 3 Chemical Reactions and Reaction Stoichiometry James F. Kirby Quinnipiac University Hamden, CT
2
Stoichiometry The study of the mass relationships in chemistry
Based on the Law of Conservation of Mass (Antoine Lavoisier, 1789) “We may lay it down as an incontestable axiom that, in all the operations of art and nature, nothing is created; an equal amount of matter exists both before and after the experiment. Upon this principle, the whole art of performing chemical experiments depends.” —Antoine Lavoisier
3
Chemical Equations Chemical equations are concise representations of chemical reactions.
4
What Is in a Chemical Equation?
CH4(g) + 2O2(g) CO2(g) + 2H2O(g) Reactants appear on the left side of the equation.
5
What Is in a Chemical Equation?
CH4(g) + 2O2(g) CO2(g) + 2H2O(g) Products appear on the right side of the equation.
6
What Is in a Chemical Equation?
CH4(g) + 2O2(g) CO2(g) + 2H2O(g) The states of the reactants and products are written in parentheses to the right of each compound. (g) = gas; (l) = liquid; (s) = solid; (aq) = in aqueous solution
7
What Is in a Chemical Equation?
CH4(g) + 2O2(g) CO2(g) + 2H2O(g) Coefficients are inserted to balance the equation to follow the law of conservation of mass.
8
Why Do We Add Coefficients Instead of Changing Subscripts to Balance?
Hydrogen and oxygen can make water OR hydrogen peroxide: 2 H2(g) + O2(g) → 2 H2O(l) H2(g) + O2(g) → H2O2(l)
9
Three Types of Reactions
Combination reactions Decomposition reactions Combustion reactions
10
Combination Reactions
In combination reactions two or more substances react to form one product. Examples: 2 Mg(s) + O2(g) MgO(s) N2(g) + 3 H2(g) NH3(g) C3H6(g) + Br2(l) C3H6Br2(l)
11
Decomposition Reactions
In a decomposition reaction one substance breaks down into two or more substances. Examples: CaCO3(s) CaO(s) + CO2(g) 2 KClO3(s) KCl(s) + 3O2(g) 2 NaN3(s) Na(s) + 3 N2(g)
12
Combustion Reactions Examples:
Combustion reactions are generally rapid reactions that produce a flame. Combustion reactions most often involve oxygen in the air as a reactant. Examples: CH4(g) + 2 O2(g) CO2(g) + 2 H2O(g) C3H8(g) + 5 O2(g) CO2(g) + 4 H2O(g)
13
Formula Weight (FW) A formula weight is the sum of the atomic weights for the atoms in a chemical formula. This is the quantitative significance of a formula. The formula weight of calcium chloride, CaCl2, would be Ca: 1(40.08 amu) + Cl: 2( amu) amu
14
Molecular Weight (MW) A molecular weight is the sum of the atomic weights of the atoms in a molecule. For the molecule ethane, C2H6, the molecular weight would be C: 2( amu) + H: 6( amu) amu
15
Question Calculate the molecular weight/formula weight for each of the following: Sulfur trioxide Barium phosphate Silver nitrate
16
Ionic Compounds and Formulas
Remember, ionic compounds exist with a three-dimensional order of ions. There is no simple group of atoms to call a molecule. As such, ionic compounds use empirical formulas and formula weights (not molecular weights).
17
Percent Composition One can find the percentage of the mass of a compound that comes from each of the elements in the compound by using this equation: % Element = (number of atoms)(atomic weight) (FW of the compound) × 100
18
Percent Composition So the percentage of carbon in ethane is
(2)( amu) ( amu) amu amu = × 100 = %
19
% Composition Calculate the percent composition of iron in a sample of iron (III) oxide Determine formula: Fe2O3 Calculate formula mass of compound Fe = 2 x = amu O = 3 x = amu Total mass: = amu
20
% Composition 3. Divide total mass of compound by total mass of element
21
Question Calculate the percent oxygen in a sample of potassium chlorate.
22
Avogadro’s Number In a lab, we cannot work with individual molecules. They are too small. 6.02 × 1023 atoms or molecules is an amount that brings us to lab size. It is ONE MOLE. One mole of 12C has a mass of g.
23
Molar Mass A molar mass is the mass of 1 mol of a substance (i.e., g/mol). The molar mass of an element is the atomic weight for the element from the periodic table. If it is diatomic, it is twice that atomic weight. The formula weight (in amu’s) will be the same number as the molar mass (in g/mol).
24
Using Moles Moles provide a bridge from the molecular scale to the real-world scale.
25
Mole Relationships One mole of atoms, ions, or molecules contains Avogadro’s number of those particles. One mole of molecules or formula units contains Avogadro’s number times the number of atoms or ions of each element in the compound.
26
Question How many atoms of silver are in 3.50 moles of silver?
Determine the number of moles of carbon disulfide in grams of carbon disulfide. Determine the number of sulfur atoms in grams of carbon disulfide.
27
Question How many grams of oxygen are present in 5.75 moles of aluminum oxide?
28
Question Determine the number of fluorine atoms in grams of sulfur hexafluoride.
29
Determining Empirical Formulas
One can determine the empirical formula from the percent composition by following these three steps.
30
Determining Empirical Formulas— an Example
The compound para-aminobenzoic acid (you may have seen it listed as PABA on your bottle of sunscreen) is composed of carbon (61.31%), hydrogen (5.14%), nitrogen (10.21%), and oxygen (23.33%). Find the empirical formula of PABA.
31
Determining Empirical Formulas— an Example
Assuming g of para-aminobenzoic acid, C: g × = mol C H: g × = 5.09 mol H N: g × = mol N O: g × = mol O 1 mol 12.01 g 14.01 g 1.01 g 16.00 g
32
Determining Empirical Formulas— an Example
Calculate the mole ratio by dividing by the smallest number of moles: 5.105 mol mol 5.09 mol 1.458 mol C: = ≈ 7 H: = ≈ 7 N: = 1.000 O: = ≈ 2
33
Determining Empirical Formulas— an Example
These are the subscripts for the empirical formula: C7H7NO2
34
Determining a Molecular Formula
Remember, the number of atoms in a molecular formula is a multiple of the number of atoms in an empirical formula. If we find the empirical formula and know a molar mass (molecular weight) for the compound, we can find the molecular formula.
35
Determining a Molecular Formula— an Example
The empirical formula of a compound was found to be CH. It has a molar mass of 78 g/mol. What is its molecular formula? Solution: Whole-number multiple = 78/13 = 6 The molecular formula is C6H6.
36
Combustion Analysis Compounds containing C, H, and O are routinely analyzed through combustion in a chamber like the one shown in Figure 3.14. C is determined from the mass of CO2 produced. H is determined from the mass of H2O produced. O is determined by the difference after C and H have been determined.
37
Combustion Analysis Suppose that 18.8 grams of glucose was burned in a combustion train resulting in 27.6 grams of carbon dioxide and 11.3 grams of water. Calculate the empirical and molecular formula of glucose. Molar mass = 180 g/mol
38
Copyright McGraw-Hill 2009
Combustion Analysis Steps: Convert 27.6 g CO2 into g of C Convert 11.3 g H2O into g H Calculate g O = g sample - (g C + g H) Find empirical formula as before (g to moles, mole ratio) Copyright McGraw-Hill 2009
39
Copyright McGraw-Hill 2009
Combustion Analysis Molecular formula = molar mass/empirical mass = 180/30 = 6 Multiply through empirical formula to obtain new subscripts Molecular formula = C6H12O6 Copyright McGraw-Hill 2009
40
Question Combustion of 5.50 g of benzene produces g CO2 and 3.81 g H2O. Determine the empirical formula and the molecular formula of benzene given that its molar mass is 78 g/mol. Empirical formula – CH Molecular Formula – C6H6
41
Quantitative Relationships
The coefficients in the balanced equation show relative numbers of molecules of reactants and products. relative numbers of moles of reactants and products, which can be converted to mass.
42
Stoichiometric Calculations
We have already seen in this chapter how to convert from grams to moles or moles to grams. The NEW calculation is how to compare two DIFFERENT materials, using the MOLE RATIO from the balanced equation!
43
An Example of a Stoichiometric Calculation
How many grams of water can be produced from 1.00 g of glucose? C6H12O6(s) + 6 O2(g) → 6 CO2(g) + 6 H2O(l) There is 1.00 g of glucose to start. The first step is to convert it to moles.
44
An Example of a Stoichiometric Calculation
The NEW calculation is to convert moles of one substance in the equation to moles of another substance. The MOLE RATIO comes from the balanced equation. C6H12O6(s) + 6 O2(g) → 6 CO2(g) + 6 H2O(l)
45
An Example of a Stoichiometric Calculation
The last step is to convert the moles of water to grams of water.
46
Limiting Reactants The limiting reactant is the reactant present in the smallest stoichiometric amount. In other words, it’s the reactant you’ll run out of first (in this case, the H2).
47
Limiting Reactants In the example below, the O2 would be the excess reagent.
48
Limiting Reactants The limiting reactant is used in all stoichiometry calculations to determine amounts of products and amounts of any other reactant(s) used in a reaction.
49
Practice Problem Given the reaction: 2Mg(s) + O2(g) 2MgO(s)
If we have 42.5 g of Mg and 33.8 g of O2, what is the limiting reagent?
50
2Mg(s) + O2(g) 2MgO(s) Given: Find: 42.5 g Mg, 33.8 g O2
Limiting reagent Concept Plan: Relationships: g Mg mol MgO mol Mg g O2 mol MgO mol O2 Molar mass Mg = g and 2 mol Mg: 2 mol MgO Molar mass O2 = g and 1 mol O2 : 2 mol MgO
51
Compare the number of moles of MgO made by each reactant.
Solution: 2Mg(s) + O2(g) MgO(s) Check: Compare the number of moles of MgO made by each reactant. Mg gives the least number of moles of MgO. Mg is the limiting reagent.
52
Question When grams of nitrogen react with grams of hydrogen, how many grams of ammonia are produced? How many grams of excess reagent remain in the reaction vessel?
53
Theoretical Yield The theoretical yield is the maximum amount of product that can be made. In other words, it’s the amount of product possible as calculated through the stoichiometry problem. This is different from the actual yield, which is the amount one actually produces and measures.
54
Percent Yield actual yield theoretical yield Percent yield = × 100
One finds the percent yield by comparing the amount actually obtained (actual yield) to the amount it was possible to make (theoretical yield): Percent yield = × 100 actual yield theoretical yield
55
Question What is the percent yield for the reaction PCl3(g) + Cl2(g) → PCl5(g) if g of PCl are formed when 61.3 g of Cl2 react with excess PCl3?
56
Question Lithium nitride can be produced by the reaction below. If the percent yield for this reaction is 22.68%, how much lithium would be required to actually produce g of lithium nitride? (3 pts.) 6 Li (s) N2 (g) Li3N (s)
57
Chapter 3 Post-Test – show all calculations!
When a 2.00-g strip of zinc metal is placed in an aqueous solution containing 2.50 g of silver nitrate, the reaction is Zinc (s) + Silver Nitrate (aq) Silver(s) + Zinc Nitrate (aq) Write and balance the above equation. Which reactant is limiting? How many grams of silver form? How many grams of zinc nitrate form? How many grams of the excess reactant are left at the end of the reaction?
Similar presentations
© 2025 SlidePlayer.com. Inc.
All rights reserved.