1. Pertemuan 10 Signal & Noise

2. Discussion Topics Signals over copper and fiber optic cables
Attenuation and insertion loss on copper media
Sources of noise on copper media
Types of crosstalk
Cable testing standards
Other test parameters
Time-based parameters
Testing optical fiber
A new standard

3. Signaling over Copper and Fiber

4. Signaling over Copper and Fiber

5. Signaling over Copper and Fiber

6. Signaling over Copper and Fiber

7. Attenuation and Insertion Loss on Copper Media

8. Sources of Noise on Copper Media

9. Types of Crosstalk
Near-end crosstalk (NEXT)

10. Types of Crosstalk
Far-end crosstalk (FEXT)

11. Power sum near-end crosstalk (PSNEXT)
Types of Crosstalk
Power sum near-end crosstalk (PSNEXT)

12. Cable Testing Standards

13. Cable Testing Standards

14. Cable Testing Standards

15. Crosstalk

16. Time-based Parameters

17. Testing Optical Fiber

18. Testing Optical Fiber

19. New Standard
On June 20, 2002, the Category 6 (or Cat 6) addition to the TIA-568 standard was published.
This new standard specifies the original set of performance parameters that need to be tested for Ethernet cabling as well as the passing scores for each of these tests.
A quality cable tester is the Fluke DSP-LIA013 Channel/Traffic Adapter for Cat5e.