1. RELEASING PROTECTOR OF MOULDING, TRANSFER AND DECAL
REPAIRING PROTECTOR OF MOULDING, TRANSFER / DECORATION PICTURES, STICKER , LIS AND SPOILER
RELEASING PROTECTOR OF MOULDING, TRANSFER AND DECAL
BODY OTOMOTIF (F-022)
SK – KD 07

2. TARGET OF LEARNING ACTIVITY
Student can know additional interior peripheral
Student can know the way of releasing protector of moulding, transfer of and decal
Teknologi dan Rekayasa

3. ADDITIONAL INTERIOR PERIPHERAL
1. Door Trim
Plastically stuff used to close interior (vehicle door interior).
2. Weatherstrip
Additional body peripheral formed from rubber used as weather shield, wind, and also dirty
Teknologi dan Rekayasa

4. ADDITIONAL INTERIOR PERIPHERAL
Teknologi dan Rekayasa

5. ADDITIONAL EKSTERIOR PERIPHERAL
1. Moulding
2. Transfer
3. Sticker
4. Decal or Lis
5. Spoiler
Teknologi dan Rekayasa

6. ADDITIONAL EKSTERIOR PERIPHERAL
Moulding, Moulding is one of the additional peripheral or components glued to external side vehicle body after body painted
Teknologi dan Rekayasa

7. ADDITIONAL EKSTERIOR PERIPHERAL
Transfer of Picture Decoration is decoration or picture residing in vehicle body for finely condition in car
Teknologi dan Rekayasa

8. ADDITIONAL EKSTERIOR PERIPHERAL
Sticker also represent one of the decoration which application in vehicle body
Teknologi dan Rekayasa

9. ADDITIONAL EKSTERIOR PERIPHERAL
Decal or lis much the same to with sticker, or decal of lis usually in form of length
Teknologi dan Rekayasa

10. ADDITIONAL EKSTERIOR PERIPHERAL
Spoiler attached above baggage cover called back wing
Ones of function Spoiler is draught water or bumper
Teknologi dan Rekayasa

11. RELEASE OF MOULDING BELT DOOR
Release door-lock knops and garnish moulding
Teknologi dan Rekayasa

12. RELEASE OF MOULDING BELT DOOR
Release unit armrest
Teknologi dan Rekayasa

13. RELEASE OF MOULDING BELT DOOR
. Release mirror remote-control bezel nut
Teknologi dan Rekayasa

14. RELEASE OF MOULDING BELT DOOR
Release window-regulator handle and door latch handle
Teknologi dan Rekayasa
Teknologi dan Rekayasa

15. RELEASE OF MOULDING BELT DOOR
Release bolts fastener of trim
Teknologi dan Rekayasa

16. RELEASE OF MOULDING BELT DOOR
Release front door belt moulding
Teknologi dan Rekayasa

17. RELEASE OF THE DECORATION TRANSFER
Release other body component that overlap transfer, like a moulding
Teknologi dan Rekayasa

18. RELEASE OF THE DECORATION TRANSFER
Do closing ( masking) with tape masking in area
Teknologi dan Rekayasa

19. RELEASE OF THE DECORATION TRANSFER
Do spraying by transfer of remover at transfer to be released, wait about 20 minute to see remover work
Teknologi dan Rekayasa

20. RELEASE OF THE DECORATION TRANSFER
Start to flake the transfer
Teknologi dan Rekayasa

21. RELEASE OF THE DECORATION TRANSFER
Spray with remover adhesive again to eliminate glue which still left behind, after 5 minute, cleaning glue
Teknologi dan Rekayasa

22. RELEASE OF DECAL / LIS
Decal/ Lis Made from weatherproof vinyl, hard and durable. procedure of decal releasing is equal by procedure transfer releasing
Teknologi dan Rekayasa

23. RELEASE OF STICKER
If its long and big enough size, procedure of its releasing is equal to transfer
Teknologi dan Rekayasa

24. RELEASE OF SPOILER
Releasing of spoiler done by release fastener bolt or eliminate effect and agglutinant
Teknologi dan Rekayasa

25. END SEASION
SEE YOU IN NEXT SEASON
Teknologi dan Rekayasa