Download presentation
Presentation is loading. Please wait.
1
Pilot Scout 2.1 Product Overview V12.11
2
Contents 1. Product Overview 2. Product Details 3. Test Configuration
4. New Features 5. Main Features 6. Conclusion
3
Product Overview Product Overview
4
Network and Market Requirements
Network performance challenges Market Requirements Multiple indoor sites with potential signal interference Difficulties in detecting potential indoor sites problems or exceptions Stable indoor voice and data test capabilities 24-hour continuous and remote operation Portable and easy to deploy Able to be concealed Built-in battery for continuous operation without external power supply Autonomous data collection Test and measurement challenges Relying on customer complaints and feedback to detect network problems Time and resources exhausted for manual tests with traditional tool Difficulties in long-term continuous tests Difficulties in simultaneous multiple indoor sites tests Bulky test equipment and difficult to deploy
5
Test Scenarios Pilot Scout 2.1 is a portable equipment with built-in test modules, GPS, Bluetooth, and WiFi functions, that can be used for indoor radio network measurement and site verification testing. Customers Network operators System vendors Service providers Government authorities such as the Telecommunications Regulatory Bodies Test Scenarios Applicable to various indoor test scenarios. Examples: Hotels Shopping malls Residential areas Offices Sites Other Test Scenarios Portable Drive Test Test information can be displayed on the LCD screen of Pilot Scout and can be used as a portable drive test tool. Automatic Drive Test Geolocation of the test routes can be performed with GPS antenna connected, and can be used as a drive test tool.
6
Product Information Portable with similar size as iPhone 6
Compact form factor and portable with small size : x 78.5 x 18.8 (mm) Light weight: about 215 g (with built-in battery) Stable with quiet operation, and 24-hour continuous testing Remote control and monitoring Flexible configuration with dual test modules and 2/3/4 G technologies supported Automatic Call (MOS) and data service tests LED screen to display device running status and test event information Simultaneous tests supported with dual test modules Data upload through WiFi Automatic and remote firmware upgrade Portable with similar size as iPhone 6
7
Advantages and Values Advantages Values
24-hour continuous and stable operation, remote management through Pilot Fleet Unify Improves work efficiency by reducing manual and financial cost Various voice and data tests Active monitoring on user’s wireless network Compact and portable with built-in antenna Applicable to various indoor test scenarios Test information displayed on the LED screen Able to be used as a portable drive test tool
8
Enhanced Features when Compared with Pilot Scout 2.0
Item Pilot Scout 2.1 Pilot Scout 2.0 CPU ARM, quad-core ARM, dual-core Sound Card Independent dual-channel PCM or dual-channel DSP sound card Single-channel sound card WiFi 2.4/5.8 GHz 2.4 GHz GPS chipset Built-in independent GPS chipset. Use test module’s GPS LTE-CA Support Not support
9
Product Details Product Details
10
System Architecture Pilot Scout 2.1 supports 2/3/4 G technologies and operates as one of the data collection and measurement probe for Pilot Fleet Unify system Pilot Fleet Unify system is able to remotely manage all DingLi's drive test data collection portfolio through its centralized device and data management platform. Users will be notified of abnormal network events through or SMS in real time.
11
Introduction to Pilot Fleet Unify
The Pilot Fleet Unify platform provides remote (and centralized) measurement probes and data management. It is capable of handling large volumes of data uploaded remotely for storage, automatic processing, reporting and analysis. Users may add and control test devices through the Web client of Pilot Fleet Unify and perform data post processing and analysis through Pilot Fleet Unify Analyser. Test Control Device Management Statistics Report Data Analysis Data Management Apply test plans in batches Dingli test devices Generates statistic reports Macro and micro data analysis Manages large volumes of data Device Management Data Management Imports multiple devices by importing an EXCEL file Records device status GIS real-time monitor Sort by test region or device type Sort by region or project Powerful search function View decoding information GIS positioning Data Analysis Macro presentation & Micro analysis System evaluation Network optimization Test monitoring
12
Measurement Probes Autonomous test measurement probes Pilot Scout
Qualcomm test module is used for signaling collection. The test plan configuration, data files, GIS real-time monitoring, statistics reports can be remotely managed on the Fleet Unify platform. Small and portable with built-in antenna, concealed design, with test status displayed on a small screen Pilot RCU Qualcomm test module is used for signaling collection. The test plan configuration, data files, GIS real-time monitoring, statistics reports can be remotely managed on the Fleet Unify platform. High performance with low power consumption, highly integrated and stable, with Aluminum alloy Shell. Pilot RCU Light Qualcomm test module is used for signaling collection. The test plan configuration, data files, GIS real-time monitoring, statistics reports can be remotely managed on the Fleet Unify platform. High performance with low power consumption, highly integrated and stable, built-in antenna, light weight, test status displayed on a small screen
13
Measurement Probes Autonomous test measurement probes
Pilot Walktour Common commercial phones (Android and iPhone) are used for data measurement and signaling collection, such as iPhone 5s, Galaxy S4 The test plan configuration, data files, GIS real-time monitoring, statistics reports can be remotely managed on the Fleet Unify platform. Traditional drive test measurements tool Pilot Pioneer Supports most common test terminals, such as Samsung, iPhone, Huawei, ZTE, etc. Connects test mobile to a laptop to perform test, and display parameters and GIS information in real time. Uploads data to Pilot Fleet Unify for remote and centralized management.
14
Specifications Item Description Voltage and current DC 5V, 2A
Power consumption 5.5 W (standby power: 20 mW, with built-in battery) Antenna Support built-in antennas for Modem and test modules. Data upload Modem, WiFi, Ethernet GPS Built-in GPS antenna; users may select external antenna, or Bluetooth GPS Working temperature -20 °C to +50 °C Humidity less than 93% RH, +40 ° C Dimension 135.5 x 78.5 x 18.8 (mm) Weight 215 g (without battery charger) Memory capacity 4 GB/8 GB/16 GB Working hours (using battery only) 90 minutes, 3.7 V/2400 mAh
15
Specifications Service Function Monitoring Function Pilot Scout 2.1
Supports IOT (Interoperability Test) for 2G/3G/4G Supports multiple network technologies: GSM/GPRS/EDGE, WCDMA/HSPA+,CDMA/CDMA1X/EVDO, TD-SCDMA, and LTE Supports Call Test (PESQ), Value Added Services Test, and Data Test Supports real-time data transmission through Modem, WiFi, test module, and LAN cable Service Function Monitoring Function Checks various test information such as parameters, events, alarms, and test plans on the Web client of Fleet Unify Checks test modules operation status and test information on the device screen Support device reboot and update dial configuration by sending SMS messages to the device Pilot Scout 2.1 Device Performance 5V voltage, easy to connect mobile power for portable drive tests Simultaneous tests without any interference between test modules Large storage capacity to meet the requirements for long-term data and log files’ storage Low power consumption to ensure long-term continuous operation
16
Indicators and Touch Panel
Indicators description No. Description 1 Blue light: being supplied by external power Green light: being supplied by battery 2 Light flashes in green: Pilot Scout is in test mode. No light: Pilot Scout is idle. 3 Green light: Pilot Scout is being charged. No light: Pilot Scout has been fully charged. Indicator light LED screen Touch panel Buttons description Touch buttons: Select options or buttons on the left or select up: Slide from the left to the right on the touch panel Select options or buttons on the right or select down: Slide from the right to the left on the touch panel Back to the previous operation: Press the middle circular button on the touch panel
17
External antenna interface
Interfaces and Buttons External power port Power External antenna interface External power point, power button, and external GPS antenna interface Modem SIM slot RJ45 cable interface Test module SIM slot SIM1 and SIM2 card slot and LAN cable interface
18
Touch Screen Various information such as device test status and module information can be displayed on the LED screen. This is useful when it is used as a portable drive test tool.
19
Test Services Call (MOS) ATTACH PDP Ping HTTP Page/Download Email WAP
SMS FTP (DL & UL) Video Streaming LTE-2CC (CA) MMS Trace Route Speed Test Multi-FTP HTTP Upload HTTP Video Play DNS LookUp PBM CSFB Facebook VoLTE (mobile to mobile)
20
Supported Frequencies and Bands
Supported Modules Module Type Supported Frequencies and Bands WCDMA/GSM HSPA/UMTS: 850/1900/2100 MHz EDGE/GPRS/GSM: 850/900/1800/1900 MHz CDMA CDMA2000, 1X, EVDO: 800 MHZ FDD-LTE/WCMD/PA+/GSM FDD-LTE: Band 1 (2100)/4 (AWS170)/17 (700) UMTS/HSPA+: 800/850/1900/2100 MHz GSM/GPRS/EDGE: 850/900/1800/1900 MHz FDD-LTE: 800/900/1800/2100/2600 MHz UMTS/HSPA+: 900/2100 MHz FDD-LTE: Band 1/3/7/8/20 UMTS: Band 1/2/5/6/8 GSM: 850/900/1800/1900 MHz 本页红色字为新增加
21
Supported Frequencies and Bands
Supported Modules Module Type Supported Frequencies and Bands LTE/UMTS/TDSCDMA/GSM FDD-LTE: Band 1/3/5 TDD-LTE: Band 38/39/40/41 UMTS: Band 1/5 TD-SCDMA: Band 34/39 GSM: 850/900/1800/1900 MHz FDD-LTE: Band 1/3/7/17 WCDMA Band 1/2/5/8 GSM: 1900/1800/900/850 MHz LTE/UMTS/GSM FDD-LTE: Band 1/2/3/4/5/7/8/20/28 WCDMA: Band 1/2/3/4/5/8 GSM:1900/1800/900/850 MHz WCDMA/GSM WCDMA: Band 1/2/5/8 Quad-band EDGE/GPRS/GSM: 1900/1800/900/850 MHz 本页红色字为新增加
22
Supported Modules Module Type Supported Frequencies and Bands
LTE-A/LTE/UMTS/TDSCDMA/CDMA/GSM (support LTE-CA) FDD-LTE: BAND 1/2/3/4/5/7/8/20/26/28 TDD-LTE: Band 38/39/40/41 WCDMA: Band 1/2/4/5/8 CDMA/EVDO: Band bc0/bc1 GSM: 1900/1800/900/850 MHz CA: Intra-band contiguous: 2/3/4/7/38/39/40/41 Intra-band non-contiguous: 2/3/4/7/41 Inter-band: 1+3, 1+5, 1+7, 1+8, 1+20, 1+26, 3+5, 3+7, 3+8, 3+20, 3+26, 3+28, 7+20, 7+28, 5+7, 39+41 LTE/UMTS/TDSCDMA/CDMA/GSM FDD-LTE: Band 1/3 WCDMA: Band 1 CDMA: Band BC0 GSM: 900E/1800
23
Supported Frequencies and Bands
Supported Modules Module Type Supported Frequencies and Bands LTE-A/LTE/UMTS/TDSCDMA/GSM (support LTE-CA) FDD-LTE: Band 1/3/5/7/8/18/19/21/28 TDD-LTE: Band 38/39/40/41 WCDMA Band 1/5/6/8/9/19 2CC (CA): 1 + 1/5/8/18/19/21 3 + 3/5/7/8/19/28 7 + 5/7/28 /21
24
Test Configuration Test Configuration
25
Test Configuration Both modules can be used for service tests.
Features When two module are used for service test, data files can be uploaded by using WiFi or either of the module during a specific period. Both modules support MOS test. Independent GPS chip and built-in GPS antenna are supported. Multiple kinds of 2G/3G/4G test modules are available for users to select. The type of Pilot Scouts can be identified by the label on the back of the test equipment. Other Features Built-in Bluetooth Built-in WiFi Support Bluetooth GPS MOS (MO/MT)
26
New Features in This Version
27
LTE Carrier Aggregation (CA) Test
Newly supported modules: R1525 and MC7430 Simultaneous LTE test can be done with two test modules. LTE 2CC CA can be done with a single module. LTE theoretic peak rate Downlink: FDD: 300 Mbps TDD: 222 Mbps Uplink: FDD: 50 Mbps TDD: 26 Mbps LTE-A is supported. Carrier Aggregation Carrier aggregation is used in LTE-Advanced in order to increase the bandwidth, and thereby increase the bitrate. 此页更改新增功能
28
Access Internet Through Wireless Hotspot
The wireless hotspot created by the test device can be used to access the internet. Pilot Watcher may use this wireless hotspot to access the internet and refresh the map window. This wireless hotspot can be used for the mobile phone and laptop to access the internet. The transmission rate depends on the performance of the serving RAT.
29
Private Server for HTTP Upload Test
Supports private servers for HTTP Upload test. Refers to the appendix in “Pilot Scout 2.1 User Manual V12.11” to create a HTTP Upload server for test.
30
APP Facebook Test Facebook has updated its login protocol.
Facebook test with the new login protocol is supported in this version. The test service name is changed to APP Facebook. Note: Users need to apply for a Facebook account on the Facebook website, use this account to apply for a corresponding App ID, and write down the App Secret. For the operation to apply for a Facebook account, see the Appendix in "A1.Pilot Scout 2.1 User Manual V12.11".
31
WiFi Test WiFi test is supported to measure the performance of the WiFi network technology via multiple services. Services HTTP page Speedtest FTP Download FTP Upload Send Receive Video Play Facebook Key KPIs Connect success rate Login/Logout success rate Login/Connect/Logout Delay Speed info
32
Main Features Main Features
33
Real-Time Indoor Test and Monitoring Scenarios
Voice Test Test mode: Use a test module to perform voice test Use the Modem to upload data in real time Deployment location On the third floor of an office building Real-time monitoring: KPIs: Setup Success Rate, Called Dropped Call, Call Quality, etc. Alarms: Continuous Setup Failure, Called Dropped, etc. Data Test Test mode: Use a test module to perform FTP, Http page or ping test Use Modem to upload data in real time Deployment location On the third floor of an office building Real-time monitoring: KPIs: Connection Success Rate, FTP Download/Upload Success Rate/Application Layer Throughput, http Page Success Rate/Delay, Ping Success Rate/Delay, etc. Alarms: Continuous Dial Failure, Download/Upload Failure, Continuous Long Delay, Continuous Ping Failure, etc. 设备布置在室内楼层,用于监控重点室分网络的运行情况。及时发现异常,比用户投诉更快。
34
Flexible Test Plan Configuration
Outer loop containing multiple inner loops 00:00 23:59 … Call *3 FTP *5 Execute test tasks based on the chronological order; each test task is a sub test loop. Test tasks configured based on different time range HTTP 08:00 12:00 16:00 20:00 24:00 Ping Voice Only the test task in the specified time range can be executed and the loop test corresponding to the test task can be performed. Test control based on session count 14:00 The completion count can be recorded even in the case of device power off or rebooting. FTP *20 HTTP *50 SMS *10 Parallel test Support parallel voice and data tests. 10:00 Call Test Plans
35
Used as a Portable Drive Test Tool
Test in crowded area -Data service MO-MT MOS test GPS measurement route Automatic data upload Hidden: Users may hold the device or put it in the pocket or bag to perform test. Test in narrow street or road Data service MO-MT MOS test GPS measurement route Durable operation with built-in and external batteries Automatic data upload Easy to carry: Pilot Scout can be put in a bag and applicable to drive tests in narrow streets or roads where vehicles do not have access.
36
Conclusion 24-hour continuous operation with high stability
1 24-hour continuous operation with high stability 2 Applicable to indoor test scenarios 3 Built-in antenna, compact and portable 4 LCD screen for easy status and information check 5 Supports multi-network technologies (2G/3G/4G), with industrial modularization design 6 Supports remote control and monitoring, and online firmware upgrade
Similar presentations
© 2025 SlidePlayer.com. Inc.
All rights reserved.