2. Aluminium Available in 1000mm wide
Available in Standard and Bold Profile
Silver or Off-white Bonded colour
Lightweight
Suitable for use in Swimming pools

3. Steel Available in 940mm width Available in Bold Profile
Zincalume or Off-white Bonded colour
Superior Strength
Commonly used in Gymnasiums and Multi Purpose halls where impact is possible.

4. Foil Supplied in Rolls Foil supplied in Rolls up to 25lm in Aluminium
Foil supplied in Rolls up to 15lm in Steel

5. Foil Packaging
Sampal Pallet Foil Box
Export Sampal Pallet Box

6. Support Bar Packaging
Renhurst FasTrack
Support Bar Packaged 4 lm

7. Set Out First determine Ceiling Layout
Material width 1000mm (940mm Steel)
Support Bar centers at 1005mm (945mm Steel)

8. Ceiling Set out

9. Set Out – Example 1

10. Set Out – Example 2
These set outs are examples only. Ceiling can be installed to meet
Architects or Clients requirements.

11. End Wall Angle Determine Ceiling Height.
Fix 20 x 20mm Aluminum angle to end walls

12. Starter Bar
Attach Starter Bar to Support Bar
Use Aluminum Pop Rivets

13. Position Support Bar Fix Support Bar to suspension clips
Insert Support Bar Joiners
Fix with Pop Rivet
Close Suspension clip tab

14. Renhurst have a fixing clip to suit all applications

15. Close Support Bar Clip

16. Support Bar Joiner

17. Support Bar Detail
Starter Bar supplied 300mm long including all components
Can be used in any position
Can be supplied in various lengths

18. Prepare Foil Determine length of material required
Cut to length using sharp knife
Ensure cut is made on the high side of the corrugation

19. Non Standard Width Determine width required.
Roll Foil out onto a suitable Bench.
Cut Foil using a high speed electric circular saw with an Aluminum cutting blade.

20. Lubricate Support Bar

21. Feed Foil into Support Bar

22. Feed Foil into Support Bar

23. Gently Pull Foil into Lubricated Support Bar.

24. Finishing off your ceiling
Clip bottom section of starter bar into position