1. Centrifugal Casting of Microfluidic Components With PDMS
Date of download: 10/1/2017
Copyright © ASME. All rights reserved.
Centrifugal Casting of Microfluidic Components With PDMS
J. Micro Nano-Manuf. 2013;1(2): doi: /
Figure Legend:
(a) Heating and cooling station for curing PDMS in a mold assembly for centrifugal casting. The total height of the system is 91 cm. (b) Ceramic heaters on a pneumatic cylinder rise to make contact with the bottom of the mold and heat the mold assembly for 4 min. (c) After heating the PDMS is complete, a set of chilled blocks come down from the top to cool the mold for 4 min.