1. Application of GPS in Mining
Submitted by- ABINASH SWAIN
Roll no- 113MN0495
Mine Surveying (MN 202) Assignment Faculty- Prof. A Gorai

2. TOPICS TO BE COVERED GPS? Introduction of GPS in Mining
Description of the System
Different Applications of GPS in Mining
GPS for safety purpose
Case Study with illustration
Challenges in the System
Future Scopes
Conclusion

3. GPS? An Introduction:
GPS is the abbreviated form of “Global Positioning System”. It is a satellite-based radio navigation system, It Permits us to find velocity, position from anywhere in the world using satellite communication system.
In mining industry it helps us in navigation, surveying,tracking and recreational purposes.

4. OPERATIONAL CONTROL segment
Description:
The system consists of three parts
SPACE segment
OPERATIONAL CONTROL segment
USER EQIPMENT segment

5. SPACE SEGMENT
It consist of several number of satellites to provide continuous positioning.
Generally,24 satellites are used out of which at least 4 are always visible.
Orbit period of a satellite is 11h 58 min.
Orbital Radius is nearly 26,600km.
The slope of each orbit is normally 55 degree

6. Operational Control Segment
It has the responsibility for maintaining the satellites and their proper functioning.
It consist of 3 physical components:
Master control station(MCS)
Monitor station(MS)
Ground antennas
The MCS operates the system and provides command and control functions for the satellite constellation.
The MS is used to track the GPS satellite.

8. EQUIPMENT SEGMENT It is commonly known as GPS receiver.
It receive the signal from the satellites to determine user position ,velocity and time.
It is generally an electronic equipment of size varying from a wristwatch to naval shipboard unit .(weight 31.8 Kg)
It consist of components like
Antenna
Receiver
Processor
Control display unit
Regulated dc power supply

9. Different Applications of GPS in mining
Control of heavy machinery such as draglines,
Control of bucket wheels and dozers,
Drill guidance,
Roads grading and maintenance,
Fleet management systems for haul trucks and other vehicles tracking and dispatch,
Asset tracking, for instance, of lighting plant and mobile generators,
Guidance and control for drill rigs and explosive trucks,
Access and zone control for visiting vehicles,
Detecting dangerous driver behaviour &
Collision avoidance applications.

10. GNSS system: “global navigation satellite system”
The conventional coal mining surveying, positioning and monitoring approaches are both time-consuming and costly. With the introduction of GNSS based systems aims to increase the productive availability of ultra-heavy mining trucks, giant excavators and earthmovers that extract and transport mineral ore from open-cut mines to processing facilities in some of the most remote regions of the planet.
The most of the mining GNSS systems are implemented using Differential GNSS (DGNSS) or Real Time Kinematics (RTK). These systems require a reference stations for which the position is accurately known allowing the deviations between measured position to the actual position and more importantly the corrections to the measured pseudo ranges to each of the individual satellites to be calculated for the mine site. The corrections calculated are transmitted by a radio network to the equipments in the field

11. Applications:
The GNSS guidance systems are applied to many aspects of mining operation including:
Blasthole Drilling: GNSS based blasthole drill systems provide drill monitoring, control and guidance. The prime objective of GNSS positioning for drilling is to navigate the drill rig over the designed collar position, eliminating the need for manual survey.

12. Continued…
Shovels, Loaders, Dozers and Graders: The planned design of the mines, ore blocks, pits and roads, is overlapped with the vehicle's current positions providing the operator with the assistance required to mine the pit and ore block to the intended mine design. The on-board display provides required assistance by providing visual cues to where are located the ore blocks and whether the current floor grade is below or above the design floor grade.

13. Continued…
Vehicle Tracking and Dispatch: The dump trucks positions obtained are sent to the central control station, where is carried the dumping scheduling management. This application determines which material is loaded and sends information and instructions to be followed by the truck drivers, in order to guarantee that the assignments are followed and the materials are correctly collected from the correct ore block and dumped in the correct dumping location

15. Continued…
Monitor Drivers and Vehicles: The sensors in the vehicle provide monitoring information of equipment's, like for instance air pressures. These systems also provide sensors to analyze the operator's well-being, by measuring key body parameters such as heart rate and skin temperature. This information is combined with GNSS information and is sent to a central control station. This information will allow for rapid intervention in case of problems.

16. Safety Applications Surveying Truck Fleet Management
High Precision Machine Control
Hazard Avoidance
Collision Avoidance

17. Application Examples (Case Study)
The following systems are among the most relevant in mining industry:
Computer Aided Earthmoving System (CAES), by Caterpillar - Minestar
Aquila Drill Management, by Caterpillar - MineStar
WENCO System
MODULAR System
EstrellaSat, EstrellaSat enable a central control base to monitor machines and the people operating them at the company's excavation sites in real time

18. CHALLENGES
One of the biggest challenges with GPS systems is keeping the amount of introduced errors to a minimum.
The errors like survey setup error, in-built survey equipment inaccuracy, the errors inherent with in GPS satellite radio signals.
While the error due to GPS Satellite radio signal can be reduced using correction factors, all other errors approaches nearly 200mm.
So high precision GPS is used to get more accuracy.

19. Conclusion
GPS survey and machine guidance applications are finding increasing acceptance in the mining industry. Widespread adoption of this technology has important safety benefits as a by product. In addition there are a number of applications where GPS systems may be fitted for primary safety purposes. Lack of satellites is the major problem to be overcome, but there are a number of possible solutions and more will be available in the future.

20. References ESA Portal, Space technology aids mining
GPS Guidance System and Reduction of Open Pit Mining Costs and Revenue Loss, Andrew P. Jarosz and Raleigh Finlayson
Safety Applications for GPS Systems in the Mining Industry, Queensland Resources Council
Monitoring of Offshore Platform Subsidence Using Permanent GPS Stations, Halim Setan and Rusli Othman, Journal of Global Positioning Systems, 2006
GSA, Europe's Satellite Navigation Programmes
GNSS applications on Wikipedia

21. Thank you 
Queries??