1. Day 1: Getting Organized Spring 2014
Instructor: Mike O’Dell

2. Instructor/GTAs Mike O’Dell Office – 631 ERB
Office Hours: Tuesday & Thursday, 1:30 PM – 3:00 PM
Other times: when available in lab (208A ERB), or by appointment
Include “CSE4317” in the subject line
GTA: TBD

3. Class Attendance and Participation
Attendance is expected for all classes and labs (and all of your team activities)
It’s better to come to class late than to not come at all
Participation (engaging in discussion, asking questions, etc.) is expected
As in Senior Design I, both of these will affect your grade for this class
Total: 10% of grade

4. Grading: Components/Weights
Attendance (6%): All classes and labs
<= 2 absent/tardy = 100
3 – 4 absent/tardy = 80
>4 absent/tardy, 0
Participation (4%): All classes and labs
>90% = 100 (actively contributes most every day)
75 – 90% = 90 (actively contributes every week)
50 – 75% = 80 (sometimes contributes)
25 – 50% = 70 (seldom contributes, but sometimes)
<25% = 0 (barely noticeable)

5. Grading: Components/Weights
Individual Deliverables (30%):
Individual Status Reports
Earned Value (your contribution to the Project)
Engineering Notebook reviews
Panel Presentation
Any other individual assignments or classroom exercises as assigned
Team Deliverables (30%):
Team Status Reports
Development deliverables per slide that follows
Final Project Review: Final Exam (30%)

6. Major Team Deliverables for SD II
Team Status Reports
Baseline Architectural Design Specification (System)
Detailed Design Document and Review (Module/Component)
System Test Plan Document and Review
Final Product (working prototype)
Wrap-up Materials
~15%
~25%
~20%
P/F

7. Architectural Design Specification
Specifies “the overall structure of the software and the ways in which the structure provides conceptual integrity for a system” (Pressman)
Provides the framework for detailed design:
the hierarchical structure of the system components (modules)
the relationships and interactions of these components
the elements and structure of data used by the components

8. Detailed Design Specifications
Interface specifications for each module (sub-program)
Documentation prologue for each routine
Pseudo-code for each routine
Physical data structure and data file specifications
Packaging specifications
Test plan for each module and sub-system

9. System Test Plan
A System Test Plan validates that all requirements have been met
It includes:
Introduction;
Approach;
Test items;
Features/requirements to be tested;
Features/requirements not to be tested;
Item pass/fail criteria;
Test deliverables;
Testing tasks;
Environmental needs;
Responsibilities;
Test Schedule;
Risks and contingencies;
Approvals required.

10. Exams/Quizzes No exams or quizzes are planned for Senior Design II.
However, some classroom exercises will be graded as individual deliverables. Eg:
Ethics exercise
Team assessment exercise
Final Project Presentation and product demo is your final exam!
30% of your final grade
You will receive team and individual scores

11. Homework & Lab Assignments
Due as specified in the assignment document, or as specified in class
If turned in after due date/time there will be at least a 20% late penalty
Will be accepted late until 5PM of the date due. After due date, grade is zero.
Any out-of-class work must be “typed” per specified standard – handwritten work will not be accepted.

12. Engineering Notebook
You are required to maintain an Engineering/ Project Notebook through the project.
This is an integral part of your project, therefore it will be used as a component of your grade on Individual deliverables.
Good record keeping is necessary for process improvement, and process improvement is necessary to be a good engineer/developer.
Your notebook should be brought with you to all lab/class sessions.
Notebooks are subject to inspection and grading by the GTA/Instructor at any time, without notice.
Team leaders will review, on occasion

13. Grading: Overall Grade
Each course component has a certain number of points assigned
Grading is based on standard 10% scale
Example: if there are 400 points available for Team Deliverables, then:
360 – 400 points is an A for that component
320 – 359 points is a B
280 – 319 points is a C
240 – 279 points is D
< 240 points is failing
See the syllabus for other details

14. Ethics Today, I assume that you all are honest and ethical
If you give me reason to believe that you are not, the UTA Engineering College Code of Ethics will be enforced.
You may assist your fellow students, (in fact, this is encouraged and expected)
You may not allow your fellow students to copy your work, and you may not copy theirs.
Unauthorized shared work will be treated as cheating.

15. Class Website http://ranger.uta.edu/~odell
All presentation materials and class information are posted here
Check it at least every class day

16. Assignment for First Lab
SD I Post-Mortem/Lessons Learned
Come prepared to discuss the lessons YOU learned in SD I and your plans to utilize those lesson in SD II
This is an INDIVIDUAL assignment
Hand in one-page summary of your “Top 3” lessons learned (typed per SD standard). Make a copy!
Each person will be given 2-3 minutes to discuss lessons learned with the class (SD1 and SD2) in lab on Friday, 1/17/2013.

17. REMEMBER Your Baseline ADS is due on 1/21/2014.
Consider/incorporate all reviewer comments
Continue walk-through/refinement
Discuss actions taken in ADS based on reviews in next Team Status Report
Other review dates are published on the class website.
I strongly recommend that each team meet now to make sure everyone is reengaged and on the same page concerning schedules and commitments.

18. Lab/Work Area (ERB 208)
For lab access you will need your badge/ ID and your self service PIN number.
Swipe your badge, then key in 5-digit PIN
If you don’t know your PIN, you can get it by:
going to
clicking “VIEW INFORMATION ABOUT YOUR ACCOUNTS”,
logging in with your MavID and password
Your PIN will be shown with other account information
CSE 4316