1. G3 Metered Outlet and EATS30 Launch
Joe Skorjanec
April 15, 2015

2. Agenda Managed update Metered Outlet technology Daisy chain update
EATS30 Monitored

3. New Managed models Catalog Number Plug KW rating Cord Length
Receptacles
EMA114-10
L5-20P (5-20P adapter)
1.92 10
(24) 5-20R
EMA339-10
L15-20P
5.76
(21) C13, (3) C19
EMA340-10
L21-20P
EMA333-10
L21-30P
8.64
(21) C13, (6) C19, (1) 5-20R
EMA341-10
L15-30P
EMA342-10
EMA343-10
CS8365
12.48
EMA111-10
5-15P
1.44
(8) 5-15R
EMA113-10
(8) 5-20R
EMA115-10
C20 (L6-20 adapter)
3.84
EMA334-10

4. Metered Outlet

5. Metered Outlet Advantages of Managed without outlet switching risk
Metered Outlet replaces Advanced Monitored
12 new models
5 models 1-2 weeks lead time
7 models 2 week lead time

6. Measure power consumption at outlet level
Measure power consumption for a single device for energy usage analysis
Gain a deeper understanding of energy usage to make intelligent decisions to reduce consumption
Identify unused servers with low consumption

7. Level 3 PUE and utility discounts
Utilize an industry-wide method to measure power effectiveness at the outlet level
Use data to calculate Level 3 PUE, create accurate reports and apply for utility discounts
Manage different customers within one rack (MTDC)
PUE Measurement
Level 1 (L1)
Basic
Level 2 (L2)
Intermediate
Level 3 (L3)
Advanced
IT equipment energy
UPS outputs
PDU outputs
IT equipment input
Total facility energy
Utility inputs
Measurement intervals
Monthly/weekly
Daily/hourly
Continuous
(15 minutes or less)

8. Department and customer billing
Use power billing as part of a revenue stream
Assign power usage to specific departments for budgeting and justifying costs

9. ePDU G3 platform features
Hot-swap eNMC module with pixel LCD
Remove module with no loss of power to devices or ePDU, configure settings
IEC outlet grip plug retention
Avoid accidental plug disconnects
Ease of installation
Pre-installed mounting buttons simplify installation

10. ePDU G3 platform features - continued
Billing grade accuracy
Effectively measure power usage
to individual outlets
Advanced pixel LCD display
Set IP address, control outlets and read current, voltage, power and energy
Color-coded outlet sections
Prevent unbalanced loading that would unnecessarily trip a breaker

11. Eight unit daisy chain
New firmware supports daisy chain of eight devices from one IP address
Double the competition
87.5% reduction in network infrastructure cost

12. Competitive daisy chain
Network cost is hidden cost of the rack PDU and is estimated at $ per drop
Servertech requires 2 skus
Raritan requires 4 IP addresses (low reliability)
Eaton
APC
Servertech
Raritan
TrippLite
Daisy chain 8 4 2 1
IP Addresses
Network cost per unit
$25
$50
$100
$200

13. New Metered Outlet models
Catalog Number
Plug
KW rating
Cord Length
Receptacles
EMO114-10
L5-20P (5-20P adapter)
1.92 10
(24) 5-20R
EMO108-10
L5-30P
2.88
EMO115-10
C20 (L6-20 adapter)
3.84
(21) C13, (3) C19
EMO107-10
L6-30P
5.76
(20) C13, (4) C19
EMO333-10
L21-30P
8.64
(21) C13, (6) C19, (1) 5-20R

14. EATS30 Monitored
Joe Skorjanec

15. Automatic transfer switch
Add redundancy to single corded devices
Two models 1-2 weeks
EATS30H
ATS V Hardwire 30A
$910
EATS30P
ATS V NEMA L6-30P, 30A
$1050

16. Local display source identification
LED light identifies S1 (Source 1) and S2 (Source 2) available
S-ON identifies which source is O/P (Output)
Test button to manually force transfer

17. Network card
10/100 network card supports IPv6

18. Non-synchronous transfer
Supports non-synchronous power sources (out of phase) transfer

19. Transfer speed and the ITIC/CBEMA curve
ATS30 can transfer in 10ms ensuring no loss of power
ITIC/CBEMA power supply must withstand 100% loss of power for 20ms

20. Summary New Metered Input and Managed configurations are available
Metered outlet technology has all the features of Managed without outlet switching
Replaces Advanced Monitoring
Daisy chain extended from 4 units to 8 units reducing total cost of ownership
EATS30 offers network monitoring, fast transfer and non-synchronized capability