1. How fast?

2. How can we tell how fast a reaction is going?

3. Changes in mass Time Mass (g) 0:00 0:30 1:00 1:30 2:00 2:30 3:00 3:30
4:00
4:30
5:00

4. Measuring gas given off
Time
Volume (cm3)
0:00
0:15
0:30
0:45
1:00
1:15
1:30
1:45
2:00
2:15
2:30

5. Measuring change in light passing through
Concentration of acid
0.1M
0.5M 1M
Time for cross to disappear

6. Rate of reaction equation
𝑅𝑎𝑡𝑒 𝑜𝑓 𝑟𝑒𝑎𝑐𝑡𝑖𝑜𝑛= 𝑎𝑚𝑜𝑢𝑛𝑡 𝑜𝑓 𝑟𝑒𝑎𝑐𝑡𝑎𝑛𝑡 𝑢𝑠𝑒𝑑 𝑜𝑟 𝑝𝑟𝑜𝑑𝑢𝑐𝑡 𝑚𝑎𝑑𝑒 𝑡𝑖𝑚𝑒

7. Q1. This label was on a bottle of stain remover.
When ‘Simply Amazing’ is mixed with water a reaction takes place which produces bubbles of oxygen gas.
(i)      Suggest a method that you could use to measure how quickly this reaction takes place. (2)
(ii)      Read the instructions on the label and then suggest how increasing the temperature of the water affects the rate of this reaction. (1)
(iii)     Suggest one other way in which the rate of a reaction can be changed. (1)
(Total 4 marks)
M (i) measure volume / mass of gas produced in a certain time period
1 mark is for a sensible way of measuring the amount of product produced and 1 mark is for the idea of timing e.g. measure volume of gas produced at regular time intervals or time taken to fill a test tube with the gas or collect a certain volume of gas
(measuring the rate at which bubbles are produced e.g. number of bubbles in 30 seconds gains only 1 mark unless an enclosed system is used)
or measure decrease in mass of flask and contents at regular time intervals
or time taken for the mass to decrease by certain amount
increases rate (owtte)
(ii) change the concentration or add a catalyst or change the surface area
or lower the temperature
accept ‘expose to sunlight’ (owtte) or change the amount of water / powder / solution used
ignore ‘stirring’
[4]