Presentation is loading. Please wait.

Presentation is loading. Please wait.

Ene Process Integration, Simulation and Optimization P

Published byTeemu Tuominen Modified over 7 years ago

Similar presentations

Presentation on theme: "Ene Process Integration, Simulation and Optimization P"— Presentation transcript:

1 Ene-47.5130 Process Integration, Simulation and Optimization P
COURSE ARRANGEMENTS Fall 2015 Timo Laukkanen

2 Points Exam 75 points Home Assignment 15 points,
At least 1 point needed to get a right to take the exam Exercises 2 points each, max. 10 points Participation enough (attending for at least 45 minutes), no written material needs to be returned SUM= max. 100 Points

3 Lectures (Timo Laukkanen)
, Fri 09:15-12:00, K1 8345a An introduction to process systems engineering and process integration pinch-technology Stream extraction Composite curves , Fri 09:15-12:00, K1 8345a pinch-technology continues Problem Table algorithm Grand composite curve Pinch violations Heat exchanger network design with pinch technology units targeting area targeting,stream grid presentation, network design Timo Laukkanen

4 Lectures (Timo Laukkanen)
, Fri 09:15-12:00, K1 8345a Heat exchanger network synthesis with mathematical programming Utility targeting with a transshipment model Units targeting with an extended transshipment model , Fri 09:15-12:00, K1 8345a Heat exchanger network synthesis with mathematical programming continues Superstructure for area and network cost optimization with an nonlinear superstructure Simultaneous heat exchanger network synthesis- the Synheat model Timo Laukkanen

5 Lectures (Timo Laukkanen)
, Fri 09:15-12:00, K1 8345a Heat exchanger network optimization with an interactive multiobjective optimization method Industrial experience on process integration??? Course SUMMARY Timo Laukkanen

6 Exercises (Mikko Kouhia, Thomas Kohl, Mohamed Magdeldin Abdelwahed Mohamed)
, Fri 09:15-12:00, K1 8345a Composite curves , Fri 09:15-12:00, K18345a Grand composite curves , Fri 09:15-12:00, K18345a Transshipment model Fri 09:15-12:00, K18345a Extended transshipment model , Week 46, Fri 09:15-12:00, K18345a, Cost optimization Timo Laukkanen

7 Home Assignment Can be done in a group (max 4 persons)
Deadline: Monday :59 Both assistants and lecturer Timo Laukkanen will give advice Timo Laukkanen

8 Exams Wed 9 Dec 15 9:00-12:00 215 (215), (Mechanical Engineering 1
Tue 16 Feb 16 9:00-12: (215),(Mechanical Engineering 1) Fri 8 Apr 16 9:00-12: (215),(Mechanical Engineering 1) Timo Laukkanen

Download ppt "Ene Process Integration, Simulation and Optimization P"

Similar presentations

Institute of Chemical Engineering page 1 Achema 2012 Thermal Process Engineering Energy optimization of industrial sites.

Institute of Chemical Engineering page 1 Achema 2012 Thermal Process Engineering Energy optimization of industrial sites.
CHEN 4460 – Process Synthesis, Simulation and Optimization Dr. Mario Richard Eden Department of Chemical Engineering Auburn University Lab Lecture No.

CHEN 4460 – Process Synthesis, Simulation and Optimization Dr. Mario Richard Eden Department of Chemical Engineering Auburn University Lab Lecture No.
ITCS 3181 Logic and Computer Systems

ITCS 3181 Logic and Computer Systems
Heat and Power Integration CHEN 4460 – Process Synthesis, Simulation and Optimization Dr. Mario Richard Eden Department of Chemical Engineering Auburn.

Heat and Power Integration CHEN 4460 – Process Synthesis, Simulation and Optimization Dr. Mario Richard Eden Department of Chemical Engineering Auburn.
Thermo-economic modelling and optimization of fuel cell systems Francesca Palazzi, Julien Godat, Dr François Marechal Laboratory for Industrial Energy.

Thermo-economic modelling and optimization of fuel cell systems Francesca Palazzi, Julien Godat, Dr François Marechal Laboratory for Industrial Energy.
Separating Azeotropic Mixtures CHEN 4460 – Process Synthesis, Simulation and CHEN 4460 – Process Synthesis, Simulation and Optimization Dr. Mario Richard.

Separating Azeotropic Mixtures CHEN 4460 – Process Synthesis, Simulation and CHEN 4460 – Process Synthesis, Simulation and Optimization Dr. Mario Richard.
Heat and Power Integration CHEN 4460 – Process Synthesis, Simulation and Optimization Dr. Mario Richard Eden Department of Chemical Engineering Auburn.

Heat and Power Integration CHEN 4460 – Process Synthesis, Simulation and Optimization Dr. Mario Richard Eden Department of Chemical Engineering Auburn.
MECH221 - Course Introduction1 MECH 221 Fluid Mechanics ( Fall Semester 2006/2007) Instructor:Prof. C. T. Hsu, Mechanical Engineering

MECH221 - Course Introduction1 MECH 221 Fluid Mechanics ( Fall Semester 2006/2007) Instructor:Prof. C. T. Hsu, Mechanical Engineering
Lecturer: Miljen Matijašević G10, room 6, Tue 11:30-12:30 Session 1, 17 Mar 2014.

Lecturer: Miljen Matijašević G10, room 6, Tue 11:30-12:30 Session 1, 17 Mar 2014.
University of Colorado - Dept of Aerospace Engineering Sciences - Introduction to FEM This is ASEN 5007: Introduction to Finite Element Methods.

University of Colorado - Dept of Aerospace Engineering Sciences - Introduction to FEM This is ASEN 5007: Introduction to Finite Element Methods.
Process Simulation and Integration of Methanol Production

Process Simulation and Integration of Methanol Production
Heat exchanger network synthesis PAULI HILTUNEN LUCAS BÄCKMAN ENE-59.4310 SPECIAL COURSE IN ENERGY FOR COMMUNITIES P.

Heat exchanger network synthesis PAULI HILTUNEN LUCAS BÄCKMAN ENE SPECIAL COURSE IN ENERGY FOR COMMUNITIES P.
C O M P U T E R G R A P H I C S Guoying Zhao 1 / 16 Computer Graphics Course Introduction.

C O M P U T E R G R A P H I C S Guoying Zhao 1 / 16 Computer Graphics Course Introduction.
Learning Pod Course Like working on your own? Need a course with flexible attendance? Want an online math course, but need some personal instruction, too?

Learning Pod Course Like working on your own? Need a course with flexible attendance? Want an online math course, but need some personal instruction, too?
ENG3190 Logic Synthesis General Information Handout Winter 2014, January 7 th.

ENG3190 Logic Synthesis General Information Handout Winter 2014, January 7 th.
8 - Heat & Power Integration1 Heat Exchanger Network Synthesis, Part III Ref: Seider, Seader and Lewin (2004), Chapter 10.

8 - Heat & Power Integration1 Heat Exchanger Network Synthesis, Part III Ref: Seider, Seader and Lewin (2004), Chapter 10.
Administrative Issues ICS 151 Winter 2010 Instructor: Eli Bozorgzadeh.

Administrative Issues ICS 151 Winter 2010 Instructor: Eli Bozorgzadeh.
CSE 1340 Introduction to Computing Concepts Class 1 ~ Intro.

CSE 1340 Introduction to Computing Concepts Class 1 ~ Intro.
Applied Numerical Method for Engineers and Scientists

Applied Numerical Method for Engineers and Scientists
Introduction This module about Process Optimization was produced under the Program for North American Mobility in Higher Education as part of the Process.

Introduction This module about Process Optimization was produced under the Program for North American Mobility in Higher Education as part of the Process.

Similar presentations

Ads by Google