1. 28-29 September 2012, Saint-Petersburg
Technology of radiation-chemical polymerization alkylmethacrylates for producing viscosity and depressor oil additives.
Дата обновляется автоматически
Research and Practical Conference “Accelerators and Radiation technologies for the Futures of Russia”
28-29 September 2012, Saint-Petersburg

2. Description of the solution and technology
electron beam 4
Oil Monomer
Commodity yield 1 2 3
1- blending block
2- Radiation-chemical reactor
3- Stabilization block
4- Electron beam accelerators
28-29 September 2012, Saint-Petersburg

3. Description of the solution and technology
Description of novelty: in brief (short) arguments of novelty
One stage producing.
Output polymer with very high cleanness, because no any intermediate chemical reagents.
Polymerization initiation process easy controlled by beam current and products flow in reactor. Possible to tune process mode for any polymer length.
Radiation method allow make polymers which impossible get by chemical methods or very low speed of polymerization.
Дата обновляется автоматически
Research and Practical Conference “Accelerators and Radiation technologies for the Futures of Russia”
28-29 September 2012, Saint-Petersburg

4. Description of the solution and technology
Current condition and prospects of development: current status and planned steps that will be created as a result of R & D
We have performed RCh polymerisations of ММА in oil for the purpose of producing viscosity additives at different monomer concentrations and different radiation doses.
The product received is homogeneous, oil viscosity with polymer additives (PMMA) does not change over hours of model operation
Дата обновляется автоматически
Research and Practical Conference “Accelerators and Radiation technologies for the Futures of Russia”
28-29 September 2012, Saint-Petersburg 4 4

5. Volume and cost parts of base oil and additives in ready oil
Market
On what market segment is focused your product
Producers the lubricant additives and motor oils.
Current oil additives price ~ $/l
Rows cost – 1 $
Irradiation cost (electricity only) – 0.05$
Equipment cost (aprx) – k$
Annual consumption of viscosity and depressor oil additives in World and Russia
Volume and cost parts of base oil and additives in ready oil
Дата обновляется автоматически
28-29 September 2012, Saint-Petersburg

6. Investor of the project realization (implementation)
Existing investors. In case if there is not investor, for which companies, foundations, individuals, and others according to the project developer opinion could be promoted as commercial interest
Дата обновляется автоматически
Research and Practical Conference “Accelerators and Radiation technologies for the Futures of Russia”
28-29 September 2012, Saint-Petersburg

7. 28-29 September 2012, Saint-Petersburg
Project team
Aleksandr Varand RCT-Co.
Aleksandr Gadetsky , RAFO (Romanian oil-chemistry company)
Boris Tolochko Novosibirsk Institute of Chemistry Solid state Siberian Branch of RAS
Mikhail Mikhailenko Novosibirsk Institute of Chemistry Solid state Siberian Branch of RAS
Aleksandr Bryazgin Budker Institute of Nuclear Physics
Mikhail Korobeynikov Budker Institute of Nuclear Physics
Дата обновляется автоматически
Research and Practical Conference “Accelerators and Radiation technologies for the Futures of Russia”
28-29 September 2012, Saint-Petersburg