Download presentation
Presentation is loading. Please wait.
1
The Organization of Matter
2
Separating mixtures Something is a MIXTURE if it contains two (or more) substances that are not chemically joined together. The substances in a mixture can often be easily separated from one another. A PURE substance only contains one material and so cannot be separated in any way (unless a chemical reaction takes place)
3
MIXTURES Mixtures are a physical blend of at least two substances; have variable composition. They can be either: Heterogeneous – the mixture is not uniform in composition Chocolate chip cookie, gravel, soil. Homogeneous - same composition throughout; called “solutions” Kool-aid, air, salt water Every part keeps it’s own properties.
4
Homogenous Mixture Is the type of mixture that has a completely uniform composition throughout itself. It’s components are evenly distributed throughout the sample.
5
Solutions are Homogeneous Mixtures
Mixed molecule by molecule, thus too small to see the different parts Can occur between any state of matter: gas in gas; liquid in gas; gas in liquid; solid in liquid; solid in solid (alloys), etc. Thus, based on the distribution of their components, mixtures are called homogeneous or heterogeneous.
6
Some common types of solutions
System Examples Gas-gas CO2 and O2 in N2 (air) Liquid-gas Water vapor in air Gas-liquid CO2 in H2O (Soda water) Liquid-liquid Acetic acid in H2O (vinegar) Solid-liquid NaCl in H2O (brine) Solid-solid Cu in Ag (Sterling silver)
7
Heterogenous Mixtures
Is the type of mixture that is not uniform in composition. If you were to sample one portion of such a mixture, it’s composition would be different from that of another portion.
8
What is phase? The term “phase” is used to describe any part of a sample with uniform composition and properties. A homogeneous mixture consists of a single phase A heterogeneous mixture consists of two or more phase
9
Phases in a heterogenous mixture
10
Phases in a homogenous mixture
11
Homogenous or Heterogenous?
Air Salt water Tea Brass Vinegar Hydrogen peroxide Steel Salad dressing Apple Sand Paint Granite Laundry detergent Cereal
12
Sieving To understand that sieving is used as a means of separating materials by particle size. To understand that particles smaller than the hole size of the sieve will pass through, and those that are larger will not. colander sieve tea-strainer remaining
13
Hand Separation / Mechanical Separation:
mechanical mixture can often be separated by hand or by the use of a sieve or magnet.
14
Color differences in candy can be used as an analogy for separating solid-solid mixtures
15
Magnetic and electrostatic separation
Substances can be separated from each other using electromagnetic forces. The effects of magnets and electricity can be seen in everyday life. Refrigerator magnets stick to the steel surface of many refrigerators, and Static electricity causes clothing to stick together once they come out of a dryer. These forces can be utilised to help separate materials in suspensions.
17
Magnetic Separation Magnetism affects certain kinds of metal, like iron and steel, but not others. As a result, magnetism can be used to separate non-magnetic materials from ones that are attracted to magnets. For example, scrap yards can remove scrap iron from other materials using a strong electromagnet. If you were to mix iron filings in with a non-magnetic material like powdered limestone, you could use a strong magnet to separate them back out again.
18
How can a mixture of iron fillings and aluminum fillings be separated?
Sample Problem How can a mixture of iron fillings and aluminum fillings be separated? 1. Analyze: Plan a problem solving strategy List the properties of iron and aluminum and look for something that would be useful in separating the mixture 2. Solve: Apply the problem-solving strategy. Iron: Metal Grayish Not soluble in water Attracted to a magnet Aluminum: Metal Grayish Not soluble in water Not attracted to magnets Make use of a property that differentiates the metals; use a magnet to attract the iron fillings.
19
Sample Problem Continued
3.Evaluate: Does the result make sense? Because the magnet attracts iron but not aluminum filings, the iron would be removed while the aluminum would be left behind.
20
Sample Problem Continued
3.Evaluate: Does the result make sense? Because the magnet attracts iron but not aluminum filings, the iron would be removed while the aluminum would be left behind.
21
Practice Problems What physical properties could be used to separate iron filings from salt? Which of the following are homogenous? heterogenous? 1.Spaghetti sauce Cough syrup 2.Glass Mixture of nitrogen gas 3.Muddy Water and helium gas
22
Magnetic Separation One interesting heterogeneous mixture is iron fortified cereal. The iron can be removed by mixing the cereal with water and then using a magnet to extract the iron.
23
Electrostatic Separation
Electromagnetic forces can be used to separate non-magnetic materials from other non-magnetic materials as well. This is called electrostatic separation. A simple form of electrostatic separation can be performed using a plastic comb and some peanuts with the skins still on. Rub the peanuts so that the skins are easily separated from the peanuts. Then rub the comb against something fuzzy (a woolly jumper would work well) and pass it over the peanuts. The peanut skins should separate from the peanuts this way. When you rub the comb against your jumper, it charges the comb. This is often referred to as static electricity. Different materials are affected differently by these electrical charges. In our example, the peanut skins are affected more strongly than the peanuts themselves.
24
Question Which of these is electrostatic separation used for?
Separating gold from gravel Cleaning smoke out of air in chimneys Separating scrap iron from other metals Sticking refrigerator magnets to the refrigerator
25
Settling: Special Case: Centrifugation
Uses gravity to pull denser particles to the bottom of a mixture Special Case: Centrifugation Uses a machine (centrifuge) to spin the sample at high speeds to pull the particles down faster
26
SEDIMENTATION and DECANTATION
27
Centrifugation A centrifuge separates a heterogeneous mixture of solid and liquid by spinning it. After a successful centrifugation, the solid precipitate settles to the bottom of the test tube and the solution, called the cetrifugate, is clear.
28
Centrifugation Close cover and turn knob. Centrifugation takes a minute or more. Note that you must turn off the centrifuge with the switch and wait for it to stop spinning, to effectively separate the precipitate and solution. Balance with another test tube filled to the same level in the opposite holder. Using a Centrifuge
29
Filtration: Allows the separation of solids from liquids or gases
Ex. Air filters The solid which remains behind on filter paper is called the residue The liquid which passes through filter paper is called the filtrate
30
Filtration Continued:
NOTE: Filtration cannot be used to separate dissolved solids from a liquid. Filtration only works when the solid particles present are big enough to be seen; smaller particles (such as dissolved salt) simply pass right through the filter paper.
31
What type of mixtures will filtration separate?
Filtration can remove suspended material from water as long as the pores in the filter paper are smaller than the particles of the suspended substance. Filtration is done by passing a mixture through a filter. The residue is the substance that remains on the filter paper. The filtrate is the substance that flows through the filter paper
32
Filtration Filtration is pooring the mixture through a filter paper which allows the liquid to pass through and leaves the solid behind Filtration separates a liquid from a solid.
33
Filtration is another method to separate a solid from a liquid
34
Separating Mixtures Some can be separated easily by physical means: rocks and marbles, iron filings and sulfur (use magnet) Differences in physical properties can be used to separate mixtures. Filtration - separates a solid from the liquid in a heterogeneous mixture (by size)
36
MAKING ROCK SALT PURE Rock salt is a MIXTURE of several substances. In order to make pure salt it is necessary to remove the INSOLUBLE dirt from the SOLUBLE salt. [Note: The method described below could be used to separate any two substances when one of them can dissolve in water and the other cannot] 1. CRUSH the rock salt using a mortar and pestle. This makes the salt dissolve more easily. 2. STIR the crushed salt into a beaker of warm water. The salt will DISSOLVE into the water but the dirt, which is insoluble in water, will not. 3. FILTER the mixture. The dirt will get caught in the filter paper as a residue and the clear SALTY WATER will drip through and form the filtrate. 4. Warm the filtrate in an evaporating basin. The water will EVAPORATE leaving behind pure salt crystals. The heat is stopped BEFORE all of the water has evaporated. This makes the salt more pure and helps prevent the evaporating basin from cracking. The last little bit of salty water is filtered out
37
Different ways of separating mixtures
1. A magnet can be used to separate IRON from SAND. How it works: The magnet sticks to the iron but not to the sand 2. Filtering (filtration) can be used to separate a solid (or suspension) from a liquid. How it works: The liquid (and anything dissolved in the liquid) passes through holes in the filter paper but the solid particles are too big and get stuck. Example: Filtration would be used to separate the dirt from some salty water. 3. Evaporation can be used to separate a dissolved SOLUTE from a SOLUTION Example: Evaporation would be used to obtain some pure salt from salty water. How it works: When salty water is warmed the water evaporates leaving behind crystals of salt.
38
Words to know Mixture: Something that can be SEPARATED into two (or more) different substances. eg air, sea water, earth, orange juice. Pure: A material is pure if it contains only one chemical substance and so cannot be separated further Filtrate: The clear liquid that has been filtered. Residue: The solid left behind after an experiment (eg the solid left in the filter paper). Filtration: The process used to separate a solid (or suspension) from a liquid. Suspension: Very fine particles of solid mixed with a liquid. If the solid is in suspension the water will often look cloudy. eg flour and water shaken together. NOTE: in a suspension the solid has not dissolved but in a solution it has. Soluble: Can dissolve Insoluble: Cannot dissolve Solvent: The liquid that is used to make a solution Solute: A substance that has been dissolved in a solution.
39
Quiz You have the following mixture. Gravel, sand and salt
Describe in steps how you would separate this mixture. Be sure to name the appropriate separation technique.
40
Distillation Distillation is the process by which a mixture is separated by heating a solution and condensing using a cooling tube. The solution is boiled and steam is driven off.
41
Salt remains after all water is boiled off.
Distillation Salt remains after all water is boiled off.
42
Distillation Distillation takes advantage of different boiling points.
NaCl boils at 1415 oC but H2O boils at 100 oC
43
Making water pure Water can be purified by a process called DISTILLATION. eg: If we wanted to make some PURE WATER from SEA WATER we would distill the sea water. The water in the flask EVAPORATES and turns into steam. Anything dissolved in the water cannot evaporate and so remains in the flask. The steam CONDENSES in the delivery tube and turns back into water which collects in the test tube. The liquid that condenses in the test tube is known as the distillate
44
Simple Distillation is a technique used to purify a liquid.
46
Quiz Suppose you had a mixture of iron nails, salt and water...
How would you separate this mixture completely? Based on which physical properties would you base your method on?
47
Quiz How would you separate the components in tap water?
Based on which physical properties would you base your method on?
52
Separation of a sand-saltwater mixture
53
Extraction Extraction is the transfer of a solute from one phase to another.
54
Types of Extraction Can use most any combination of phases (solid, liquid, gas.). Solid – Liquid - Useful for the isolation and purification of naturally occurring sources. Making coffee is an example for extraction.
55
Types of Extraction Liquid – Liquid - More common method
- Depend on solubility properties of components. Like dissolves like - So ideally, the extracting solvent should be similar to the solute. We will use two immiscible liquids like vinegar and olive oil.
56
EXTRACTION pouring a mixture of oil and water together, all mixed up, into the funnel the oil and water separate and the oil floats on top of the water a hole opens under the funnel and the water leaves, and the oil remains
57
Chromatography This animation shows what happens to a mixture of two dyes. The green and yellow dyes can be separated. The green dye moves along with the solvent better than the yellow dye. The mixture is separated into two "spots". There are two substances in the mixture. Water can be used as a solvent but so can other liquids if need be.
58
Paper Chromatography Components of dyes such as ink may be separated by paper chromatography.
62
REFERENCES
63
REFERENCES http://www.colour-ed.org/activity/act_01/01_index.htm
Similar presentations
© 2025 SlidePlayer.com. Inc.
All rights reserved.