1. Measurement Equipment
Delta System Training

2. Basic Layout FRONT PANEL Torque Indicator lights On / Off Switch
UP/Down
Left /right
Keys
Alpha/Neumeric
Keypad
‘Enter’
key
Printer key
Escape key
Validate key

3. Rear View Digital Transducer Input PC Input Input - Output
Battery Charger
& indicator
Transducer
Input

4. RESULTS PARAMETERS DOWNLOADING SERVICE MAINTENANCE Delta 4000 2.0a
MENU
Delta a
RESULTS
PARAMETERS
DOWNLOADING
SERVICE
MAINTENANCE
PRESS ‘DOWN’ BUTTON

5. ACQUIS ITION ACQUIS ITION RESULTS RESULTS PARAMETERS PARAMETERS
MENU
Delta a
ACQUIS ITION
RESULTS
PARAMETERS
DOWNLOADING
SERVICE
ACQUIS ITION
RESULTS
PARAMETERS
DOWNLOADING
SERVICE
PRESS ‘ENTER’

6. PARAMETERS
PARAMETERS
TASK
PRINTER
SERIAL LINK
PRESS ‘ENTER’

7. PARAMETERS
TASK
SELECT
MODIFY
CREATE
COPY
DELETE

8. PARAMETERS
TASK
SELECT
MODIFY
CREATE
COPY
DELETE
PRESS ‘ENTER’

9. TASK Name : Mode : Standard Bw : 128 Hz Tran : CMD4001 S /N :
CREATE TASK
BLACK DIAMOND
Anything with a in front of it
has PRESET numbers.
SELECT WITH or
Left or Right button
TASK
Name :
Mode : Standard
Bw : Hz
Tran : CMD4001
S /N :
Unit : Nm
BandWidth
DEFAULTS to Hz
DO NOT CHANGE
TRANSDUCER
You MUST select
the CORRECT
tranducer.
UNITS
SELECT the UNIT
you want to
measure .

10. TASK Unit : Nm TORQUE Instr : 10.000 Tol : +/- 10 % [9.000 - 11.000]
CREATE TASK
TASK
Unit : Nm
TORQUE
Instr :
Tol : +/- 10 %
[ ]
N.meas.: 50
PRESS ‘DOWN’ BUTTON

11. TASK N.meas.: 50 Threashold Meas. : 0.75 Reset : Manu Curve Param…..
CREATE TASK
TASK
N.meas.: 50
Threashold
Meas. : 0.75
Reset : Manu
Curve Param…..
1 Detail
PRESS ‘DOWN’ BUTTON

12. Delta a
Reset : Auto
Thres : 50 %
Time : s
Curve Param…..
1 Detail
Curve Param…..
1 Detail

13. CURVE PARAMETERS
Delta a
CURVE
Threashold – 0.00
Time sec

14. down to PARAMETER and press ENTER TASK is highlighted so press ENTER
SUMMARY - to CREATE a TASK
ESC to main menu
down to PARAMETER and press ENTER
TASK is highlighted so press ENTER
down to CREATE and press ENTER
cursor flashing on ‘Name’ - INSERT NAME
down to TRANS - SELECT CORRECT TRANSDUCER
down to TORQUE INSTR: insert TARGET TORQUE
down to THREASHOLD Meas. :set to 20% of Target
VAL
THAT’S IT !! press to ACCEPT CHANGES
PRESS ESCAPE UNTIL THE ‘ACQUISITION’ SCREEN

15. ACQUIS ITION RESULTS PARAMETERS DOWNLOADING SERVICE ESC ESC
MENU
ESC
TAKES YOU TO THE ‘MAIN MENU’
ESC
Delta a
ACQUIS ITION
RESULTS
PARAMETERS
DOWNLOADING
SERVICE

16. Delta 9.53 Nm 4000 St P P T aR Mes : 12 / 50 V 2.0 a 12 - ‘TASK NAME’
FRONT SCREEN
12 - ‘TASK NAME’
4000
Delta
9.53 Nm
Mes : 12 / 50 St P P T aR
V 2.0 a
10 :25

17. 9.53 Nm St P aR St P aR [-] 12.42 + 10 % 9.500 X 9.476 Mes : 12 / 50
PRESS THE ‘UP’ BUTTON
PRESS THE ‘RIGHT’ BUTTON
PRESS THE ‘RIGHT’ BUTTON
‘TASK NAME’
9.53 Nm
Mes : 12 / 50
[-] 12.42 +
10 %
9.500 X
9.476 St P aR St P aR
10 :25

18. Highlight as required and ENTER
Results
To ‘see’ RESULTS
ESCAPE to menu
DOWN to RESULTS & ENTER - results menu displays;-
RESULTS
MEASUREMENTS
CURVE
STATISTICS
Highlight as required and ENTER

19. 9.53 Nm 18/10/02 12 :10 :37 Results - View MEASUREMENTS Mes : 12 / 50
‘TASK NAME’
9.53 Nm
Mes : 12 / 50
18/10/02
12 :10 :37
Reset meas.
LEFT arrow - lets you SCROLL - measurements

20. 9.53 Nm 18/10/02 12 :10 :37 Results - PRINT MEASUREMENTS Mes : 12 / 50
‘TASK NAME’
9.53 Nm
Mes : 12 / 50
18/10/02
12 :10 :37
Reset meas.
PRESS PRINT Key brings up a menu

21. Results - PRINT MEASUREMENTS
12 - ‘TASK NAME’
Periph. : Printer
Header : Yes
Format : Standard
Date : / 09 / 02
Time : : 10 : 47
VAL
Press VALIDATE - screen asks
DO YOU WANT TO
PRINT ?
NO YES

22. STATISTICS MENU Statistics TARGET + Tolerance are set up in the TASK
Once set up to VIEW / PRINT a STATS -ESC to menu
Select RESULTS & highlight STATISTICS
- press ENTER
Select SCREEN or PC for output

23. CURVES & JOINT ANALYSIS
Curve Parameters are set up in the TASK menu
Once set up to VIEW / PRINT a CURVE -ESC to menu
Select RESULTS & highlight CURVE - press ENTER
Select SCREEN or PC for output

24. Joint Analysis

25. Joint Analysis What information about the fastener & joint
can you get from this simple graph ???
TIME
Torque

26. Joint Analysis 1.0 2.0 3.0 4.0 5.0 6.0 Torque TIME
Torque
TIME

27. It’s the CHANGE
POINTS on the
curve that are the
INDICATORS

28. Joint Analysis Typical curve - self tapper into sheet metal
(Through Hole)
Torque
TIME

29. Roller Torque (non shut off clutch)
FINAL TORQUE
dependent on the number
of times the clutch slips
TIME SECONDS
Torque
Rundown Phase
SHUT OFF
Application Phase

30. Delta a
ESC
VAL
PRESS ‘DOWN’ BUTTON
PRESS ‘ENTER’