1. Automation Technologies SCADA SENSORS HMI

2. Introduction to Automation Technologies
Automation is control of a system or equipment. Industrial Automation using so many technologies to control system.
Following are automation technologies:
SCADA
SENSORS
HMI

3. SCADA
Supervisory control and data acquisition (SCADA) is one of the technology of automation.
SCADA is a control system architecture that uses computers, networked data communications and graphical user interfaces for high-level process supervisory management.
SCADA is extensively used in the Process industry for remote monitoring and control of the plant/ system which is geographically wide spread.

4. SENSORS Most of the automation systems are closed loop systems i. e
SENSORS Most of the automation systems are closed loop systems i.e. to have a better control they have a feedback mechanism in place. This feedback system used is Sensors.
HMI
HMI (Human Machine Interface) is a device that acts as an interface between the PLC and the operator.
Example:

5. TOPIC COVERED The participants get a complete understanding on:
SCADA: Static screen development: depicting the complete plant in different screens.
Dynamic linking: Communications with the PLC and animation of SCADA objects according to the status on the field.
Trending: viewing the X-Y plots of different parameters for analysis.
Configuring Alarms, recipes and report generation & Securities.
SENSOR: This section introduces the participants to the Sensors, their types(Digital/Analog) and working.
HMI: Static screen development, Dynamic linking, Trending, Alarm setup and securities. Complete attention is given from project development to downloading the project to the HMI and communications between PLC and HMI.

6. Thank you…!!! "9 Mansi" Complex,RamMaruti Road,Naupada,Thane.
Contact: