1. RASPBERRY PI WORKSHOP

2. Setting LCD Touchscreen on Raspberry Pi 3

3. LCD Touchscreen
A touchscreen is an electronic input device that the user can control with single or multi-touch gestures. The touchscreen enables the user to interact directly with what is being displayed, rather than using a mouse, touchpad, or any other intermediate device.

4. Install your raspberry using Win32 Disk Imager with an OS which is not NOOBS. Here is an OS which is not NOOBS:
Do not plug the LCD to your raspberry pi yet and use lxterminal or SSH to set-up.
SSH
Secure Shell (SSH) is a UNIX-based command interface and protocol for securely getting access to a remote computer.
SSH allows you to connect to your server securely and perform Linux command-line operations.
Software: Putty and Xming

5. Setting up SET UP YOUR LOCAL NETWORK AND WIRELESS CONNECTIVITY
ENABLE SSH
SET UP YOUR CLIENT
Termius

6. How to: 1. Configure your Pi: Set as:
Boot Option -> Desktop/CL1 ->Desktop Autologin
Advance Option -> Expand Filesystem
Interfacing Option ->SP1 -> Enable
Interfacing Option -> I2C -> Enable
It will automatically reboot. 1
sudo raspi-config

7. Download and Install LCD driver:
 Unzip the file:
then:
         
To toggle the mode to LCD display: 1
   wget  1
   tar xvf LCD-show tar.gz 1
 cd LCD-show/ 1
chmod +x LCD35-show
./LCD35-show

8. . Now, turn off your raspberry by removing the power supply then plug your LCD to your raspberrypi.
3. After turn on your raspberry pi, the RPi LCD is ready to use.