1. Quick Reference Parts Guide Introduction
This Quick Reference Parts Guide is an easy way to locate part numbers to common replacement parts. It does not include items such as wire or their cord grips, terminal blocks, or mounting brackets. It also does not include standard hardware like nuts and bolts. To locate parts that are not covered here, refer to the drawing set in your equipment manual, part number
Main Menu
Exit
Navigating the CD

2. Navigating the Quick Reference Parts Guide
Main Menu
The next screen is the Main Menu, which has buttons to reach each category that this parts guide uses.
Each category may be further divided into different sections, each with their own button on the category’s main screen.
From each screen, you can:
Return to the Main Menu
Return to the category’s main page
Go forward or backward one screen at a time within the category
Click a link to order the part on-line or via
In addition to using the buttons provided, you can manually scroll through the screens by clicking your left mouse button.
Exit
How to get
To the
eStore
To access a different program or file while leaving the Quick Reference Parts Guide open, hold the Alt button while pressing the Tab button on your keyboard.

3. Once you find the part number you need, click on the web site link
How to get to the eSTORE
Example

4. This is the web site, click on the machinery tab
How to get to the eSTORE

5. Click the Ordering Parts menu, then, click eStore.
How to Get to the eStore

6. How to Get to the eStore Main Menu Exit
Enter your eStore login and password and click Login.
If you need to register, click the Click here to register button.
Main Menu
Exit
How to Get to the eStore

7. Ready - Feed Lumber Conveyor
Main Menu
Ready - Feed Lumber Conveyor
Navigating the CD
Exit
Electrical Parts
Mechanical Parts
Guard
Click on the link below to order
your parts through our eStore:
Click on the link below to order your parts via .
Safety Labels
Electrical section is only good for conveyors
built after June 2006.

8. Electrical Parts Main Menu Exit www.mii.com mitekparts@mii.com
Pull cord switch part#515897

9. Electrical Parts Main Menu Exit www.mii.com mitekparts@mii.com
For 20 foot and 30 foot ready feed conveyors
5HP motor for incoming 208 volts part#
5HP motor for incoming 230 Volts part#
5HP motor for incoming 460 Volts part#
5HP motor for incoming 575 Volts part#

10. (Handle part# 509423 OBSOLETE)
Main Menu
Exit
Electrical Parts
(Handle part# OBSOLETE)
All parts marked obsolete need to be replaced
Handel part#
Shaft part#
Fused disconnect part#
New part numbers below

11. Electrical Parts Main Menu Exit www.mii.com mitekparts@mii.com
(Disconnect switch fused part# OBSOLETE) see previous page
(Disconnect shaft part# OBSOLETE)
See previous page
For incoming 208/230 Volts fuse 30A part#
For incoming 460 Volts fuse 15A part#
For incoming 575 Volts fuse 10A part#

12. Electrical Parts Main Menu Exit www.mii.com mitekparts@mii.com
For incoming 208 Volts transformer part#
For incoming 230/ 460 Volts transformer part#
For incoming 575 Volts transformer part#

13. Electrical Parts Main Menu Exit www.mii.com mitekparts@mii.com
Fuse block kit primary side not the fuses part#
Fuse block kit secondary side not the fuse part#
For incoming 208/230 Volts all three fuses 0.6A part#
For incoming 460/575 Volts top two fuses 0.3A part#
For incoming 460/575 Volts bottom single fuse 0.6A part#

14. Electrical Parts Main Menu Exit www.mii.com mitekparts@mii.com
Motor starter reversing part#
For incoming 208 Volts overload part#
For incoming 230 Volts overload part#
For incoming 460 Volts overload part#
For incoming 575 Volts overload part#

15. Electrical Parts Main Menu Exit www.mii.com mitekparts@mii.com
Foot switch twin part#
Twin guard part#

16. Electrical Parts Auto Option Only Main Menu Exit www.mii.com
Auto Option Only
Relay part#

17. Limit switch with arm part# 515041
Electrical Parts
Auto Option Only
Main Menu
Exit
Limit switch with arm part#
Selector switch part#
Contact block for selector switch part#
Horn part#

18. Mechanical Parts Main Menu Exit www.mii.com mitekparts@mii.com
Flange bearing part#
Idler shaft part# 70781
Sprocket part#

19. Pillow block bearing part# 419689 Drive shaft 2 strand part# 63886
Mechanical Parts
Main Menu
Exit
Pillow block bearing part#
Drive shaft 2 strand part# 63886
Chain sold by the foot for 20’ conveyor need
40’ per stand. For 30’ conveyor need 60’ per
stand. Part# Chain is C2060H
Connector link part# one needed per stand
Offset link part# one needed per stand
Wear- strip for 20’ conveyor part# 62582
Wear – strip for 30’ conveyor part# 62584
Sprocket part#

20. Connecting drive shaft part# 63889
Mechanical Parts
Main Menu
Exit
Connecting drive shaft part# 63889
Coupling complete part#
includes insert

21. Drive shaft 3 strand part# 63885
Mechanical Parts
Main Menu
Exit
Sprocket part#
Chain sold by the foot need 5ft. part#
Offset link part#
Master link part#
Chain is #60-2 roller chain
Sprocket part#
Drive shaft 3 strand part# 63885

22. Chain guard bottom part# 63895-501
Main Menu
Exit
Chain guard top part#
Chain guard bottom part#

23. Safety Labels Main Menu Exit www.mii.com mitekparts@mii.com

24. Safety Labels Main Menu Exit www.mii.com mitekparts@mii.com