2. APPLICATIONS
Designed and manufactured to meet the needs for constant pressure required by modern plumbing systems, such as :
Domestic applications and light industry
Washing systems
Irrigation
Rain water utility
Well water supply (borehole pumps)

3. DOMESTIC APPLICATIONS

4. PLUS Comfort Constant pressure No hammering Eliminate overpressure
Easy to use Installation driven by a wizard
Easy maintenance Easy replacement flow valve
Energy saving up to 65% Environment protection : reduced CO2
emission
Less maintenance Long life for the pump

5. p = CONSTANT Q = VARIABLE
CONSTANT PRESSURE FEATURE
It’s a system that allows to have a:
WITH
p = CONSTANT
Q = VARIABLE
And this is possible thanks to INVERTER that change the frequency of alimentation of the motor

6. 1. Inverter 2. Flow Sensor 3. Pressure Sensor
MAIN COMPONENTS
This system is compose by three principal pieces:
1. Inverter
2. Flow Sensor
3. Pressure Sensor

7. TECHNICAL CARACTHERISTICS
VOLTAGE 50/60 HZ
INDEX OF PROTECTION IP 55
MULTI INVERTER SYSTEMS UP TO 8 UNITS
MAX PRESSURE bar
MAX FLOW l/min
MAX LIQUID TEMPERATURE 50 °C
MAX ENVIRONEMENT TEMPERATURE 50 °C
INSTALLATION VERTICAL OR HORIZONTAL (ONLY M/M & M/T)

8. EXAMPLES OF INSTALLATION
SURFACE PUMP INSTALLATION
SUBMERSIBLE PUMP INSTALLATION

9. DIMENSIONS-COMPARISON TO THE OLD VERSION
DNM 1’’ 1/2
282 / 282
237 / 211
188 / 174
DNA 1’’ 1/4
Interchangeable
Same interaxis and threads as the old versions
Dimensions
Dimensions are modified to guarantee better positioning of the electronic board and capacitors
Esthetic quality
Modern design

10. CONSTRUCTIVE CARACTHERISTICS
Standard Cable gland
3 holes for inputs/outputs
Integrated flow valve in Noryl
Integrated pressure sensore 0-16 Bar
Sensore Hall (magnetic) 1 2 4 3 5

11. DISPLAY INTERFACE & SOFTWARE
Multi pump booster sets up to 8 pumps
Software compatibility
Interface DISPLAY OLED - user :
Installation driven by a WIZARD
High resolution
Parameters description
ENABLE BUTTON to stop/restart the pump

12. QUICK GUIDE

13. AD M/M PRODUCT RANGE AD M/M 1.1 AD M/M 1.5 AD M/M 1.8 MODEL
MOTOR POWER SUPPLY
INPUT VOLTAGE
OUTPUT VOLTAGE (TO THE PUMP)
MAX
NOMINAL CURRENT
FLUID INPUT HYDRAULIC (DNA) GAS
FLUID OUTPUT HYDRAULIC (DNM) GAS
CONNECTIVITY
AD M/M 1.1
1.1 kW
1 x 220/240 V
8.5 A rms
1 1/4“ M
1 ½" F No
AD M/M 1.5
1.5Kw (230 V)
0.55 kW (115 V)
1 x115 V
1-x 115 V
11 A rms
RS 485
AD M/M 1.8
1.8 kW (230 V)
1 kw (115 V)
14 A rms
AD M/M

14. AD M/T AD T/T PRODUCT RANGE AD M/T 1 AD M/T 2.2 AD T/T 3 AD T/T 5.5
MODEL
MOTOR POWER SUPPLY
INPUT VOLTAGE
OUTPUT VOLTAGE (TO THE PUMP)
MAX NOMINAL CURRENT
FLUID INPUT HYDRAULIC(DNA) GAS
FLUID OUTPUT HYDRAULIC (DNM)
GAS
CONNECTIVITY
AD M/T 1
1 kW
1 x 230 V
3 x 230 V
4.7 A rms
1 1/4 "
1 1/2 "
RS 485
AD M/T 2.2
2.2 kW
10.5 A rms
AD M/T
MODEL
MOTOR POWER SUPPLY
INPUT VOLTAGE
OUTPUT VOLTAGE
MAX NOMINAL CURRENT
FLUID INPUT HYDRAULIC(DNA) GAS
FLUID OUTPUT HYDRAULIC (DNM) GAS
CONNECTIVITY
AD T/T 3
3 kW
3 x 400 V
7.5 A rms
1 1/4“
1 1/2“
RS 485
AD T/T 5.5
5.5 kW
13.3 A rms
AD T/T

15. ELECTRONIC BOARD 4 Inputs, 1 input for the M/M 8,5 A version
heatsink
4 Inputs, 1 input for the
M/M 8,5 A version
2 outputs: status of the pump

16. INPUTS
CLEAN CONTACT
Input IN1 : pressure switch or flow switch to control the level of water
reserve in the tank. Active function with input F1
JUMPER
CLEAN CONTACT
Input IN2 : second pressure sensor  auxiliary set point Pi
(P1, P2, P3), Active function with input F2
JUMPER
CLEAN CONTACT
Input IN3 : Enable of the inverter with an external signal + reset alarms
Active function with input F3
JUMPER

17. OUTPUTS
OUT 1  FAULT
OUT 2  PUMP IS RUNNING

18. Until 8 inveters connected together
MULTI INVERTER SYSTEM
The inverters communicate through a 3-wire connection
Twisted and shielded cable
Lmax between 2 inverters = 5 m
Lmax between x inverters = 20 m
Until 8 inveters connected together

19. EXAMPLE OF DOMESTIC BOOSTER WITH ACTIVE DRIVER PLUS
MAIN COMPONENTS
Protection control unit
Delivery manifold
Active Driver PLUS
Vertical or horizontal pump
Non return valve
Suction manifold
Metal baseplate
Ball valves
Vibration dampers

20. ENERGY SAVING
Active Driver Plus supplies the water you require when it’s required.
And you can see it!
On the vertical axis, the time for which the pump has been on at the specific power level (% of the time with respect to the total).
On the horizontal axis are the bars at the various power levels (% with respect to the maximum power).
Energy Saving respect to an on-off system with the same motor power.

21. TOTAL ENERGY SAVING

22. CONNECTION TO THE POWER SUPPLY CONNECTION

23. WINDINGS CONNECTION
For the ActiveDriver M/T it is necessary change motor connection from STAR to DELTA
Star Connection:
Delta Connection:
Nominal Voltage Motor
Voltage Supply
Connection Diagram
230 / 400V
400 V
STAR
230 V
DELTA

24. THANK YOUR FOR YOUR ATTENTION