1. BOABEAM

2. Operation principle The principle is very simple.
Car equipped with Dash cam and Boa Beam
Car equipped with Dash cam
Operation principle
The principle is very simple.
After crash LED turns on and starts blinking if the crash repeated within 5 seconds.

3. Electronical characteristic
Specification
Section
Contents
Standard
Composition
Main product
Power supply wire
light connector
sensitivity control switch
Time control switch
Light
2 pcs
Tape
double side tape 4x16x0.8
General
CPU
8RISC
Specification
Shock sensor
Acceleration sensor of semiconductor type
Brightness
3m distance
57[lux], brightness 2[lux]
5m distance
30[lux], brightness 2[lux]
7.5 distance
15[lux], brightness 2[lux]
Electronical characteristic
Operating voltage
12~24V
Current on stand by
10mA / 12V
Current on motion
550mA / 12V (2pcs lights)
Size
Size(main product)
minimum 60x40x21 [mm]
maximum 80x40x21[mm]
Size(light)
minimum 25x78.5 [mm]
maximum 32.5x78.5[mm]
Weight(main product)
25g (except for cable)
Weight(light)
15g (except for cable)
Temperature
Motion temperature
from 10 degrees below zero to 65 degrees
characteristic
Storage temperature
from 20 degrees below zero to 85 degrees

4. It works when engine off after 3seconds. Please keep in mind
*It depends on a car model
Lamp
Sensitivity control
Time set
Light 1
BOABEAM light
Light 2
Same connection like front light
It works when engine off after 3seconds. Please keep in mind

5. Backlight cover What is backlight cover ?
window
BOABEAM
cover
What is backlight cover ?
After bumps or shock the Boa Beam flashes out. The light spreads on the wind screen. It causes to blinding the dash camera. To avoid it and get the proper recording the cover is supposed to be used. Thus, the Boa Beam light comes out and dash camera films lighted street