1. MBD at Festo
Status since the last meeting

2. Tooling section works with MBD
Creo 2.0
Creo View 3.0
Mostly color based communication with supplier
Tolerance is descript by a color table

3. Internal CAM manufacturing is using 3D models
Anbaufabrik
Automatic creatation of CAM models from the customer order
Automated CAM program creating from the 3D model
Mostly the geometry is used
CAD/CAM environment
Creo 3.0 Pro/NC
UDF
Mapkeys

4. Actual Status Where we are? Where will we want to go?
Status until Q3 / 2016
Postpone the MBD activities until Creo 4.0 for the designing departsments
New activities driven by
Introducing GPS standards (ISO 8015 / ISO 1101)
Planed Update to M230 in Q1 / 2017
Update of Windchill 10.1 with Creo View 2.0  Windchill 10.2 with Creo 3.1 in Q1 / 2017

5. Problem: C12493770 can not display 3D annotation in 2D
Problem solved since M180
M110 2D 2D
Since M180

6. GPS4Festo Introducing GPS – standards at Festo Steps in CAD
Analyse of the current workflows
Analyse of the GPS capacity of Creo 2.0
3D MBD 2D
Countermeasure
Which module can solve the problem? (3D / 2D)
Steps in the organisation
Training of the user
Coaches in the development departsments
Introducing of new tolerance calculation tool

7. GPS4Festo Where we stand now? CAD – analyse result
Not all can be done in 2D
Either in 3D
3D annotation reduce the complexity for the creating of 2D symbols
3D datum symbol supports the standard case better (acc. To GPS standard)
Creo 2.0 and Creo 3.0 will not support the actual ISO – standards
User – analyse result
Most user doing the GD&T annotation in 2D with symbols created by Festo from the Wildfire 3.0 time
Only some user are using the 3D annotation
Usage of the GPS – standards is a change in how to think
Company know – ledge transfer
Lesson learned from other companies

8. GPS4Festo activities CAD 2D Using the 3D annotation
Adding information in 2D, which can be done in 3D  2D symbols
New 3D combined views
Evaluate Creo 2.0 capacities and open case at PTC support
Evaluation of add – on, e.g. GD&T Advisor
User training
Improve of the GPS – training  based on more practise experience
New training for CAD user in 3D annotations
Training based on projects
Organisation
Management attention by Board of Directors
New team from all departments to introduce the GPS – standards as a cooperate project
Introducing of team for different purpose (GPS – experts for the usage of the standards / management team for organisation items 2D
GTOL Dialog in 3D 3D

9. Creo 2.0 and GPS - standards
Analyse of the current supported standards
Creo 2.0 supports the following standards only partial:
ISO 1101
ISO 5459
ISO – 1
ISO – 2
In 2017 many new standards will be
Released
updated
Many new ISO – Symbol can be found in the Arial Unicode MS font.

10. GPS usability for the user
How is it possible to support the CAD user during the usage of the GPS – standard?
Test of GD&T Advisor
Different version M110 / M230
Gap analyse of the supported standards in the software to the actual standards
Usability test by CAD user (still running)
Support by external expert
Increase the knowledge of the internal experts
Build a knowledge base for
Use cases
Best practise

11. Additional further steps
Interaction with new Q-system iqs based on 3D models
Handling assembly based on 3D assemblies and Creo View