Presentation is loading. Please wait.

Presentation is loading. Please wait.

Overview of Channel Usage Change

Similar presentations


Presentation on theme: "Overview of Channel Usage Change"— Presentation transcript:

1 Overview of Channel Usage Change
September 2006 doc.: IEEE /1458r0 Sept 2008 Overview of Channel Usage Change Date: Authors: Hart et al (Cisco Systems) Joonsuk Kim, Broadcom Corp.

2 September 2006 doc.: IEEE /1458r0 Sept 2008 Situation Solving service differentiation for smart phones and laptops (major users of bidirectional voice, video and data) is an important problem. The default EDCA were chosen: To provide service differentiation between management traffic, “voice”, “video”, “best effort” etc To provide 11e best effort traffic with the same level of priority as legacy traffic Hart et al (Cisco Systems) Joonsuk Kim, Broadcom Corp.

3 September 2006 doc.: IEEE /1458r0 Sept 2008 Problem It turns out that the default EDCA parameters are poorly chosen for dense environments (e.g. enterprise environments) with stringent voice and video QoS requirements. Accordingly, in these environments, EDCA parameters for BE and BK are typically advertised with larger backoffs in order to enable greater service differentiation. Although larger backoffs may appear to waste medium time, experience indicates that this more than pays off for itself in terms of reduced collisions and greater QoS. Presently IBSS (and DLS) STAs cannot take advantage of this prior knowledge Hart et al (Cisco Systems) Joonsuk Kim, Broadcom Corp.

4 September 2006 doc.: IEEE /1458r0 Sept 2008 Solution 08/1095 Send EDCA Parameter Set within Channel Usage frames, and reuse the EDCA Parameter Set sent in probe requests Since this is the same IE as sent in probe requests, it offers IBSS (and DLS) STAs the same right to access the channel as associated clients No reduction in service quality. This could introduce a new DoS attack from fake APs advertising bogus EDCA parameters to degrade nearby IBSS (and DLS) STAs. For this reason it appears as a hint, and IBSS (and DLS) STAs are free to determine the reliability of the hint (e.g. did the hint come from my associated AP?) and to follow or to disregard the hint. Hart et al (Cisco Systems) Joonsuk Kim, Broadcom Corp.


Download ppt "Overview of Channel Usage Change"

Similar presentations


Ads by Google