1. There will be a quiz next Thursday, April 23
There will also be a problem solving session Thursday, April 23 at 1:00 PM

2. Magnetic materials
When materials are placed in a magnetic field, they get magnetized.
In majority of materials, the magnetic effects are small. Some however show strong responses.
The small magnetism is of two kinds:
Diamagnetics are repelled from magnetic fields
Paramagnetics are attracted towards magnetic fields
This is unlike the electric effect in matter, which always causes dielectrics to be attracted.

3. The Bohr Magnetron

4. Magnetization

5. Diamagnetism occurs in substances where magnetic moments inside atoms all cancel out, the net magnetic moment of the atom is zero. The induced magnetic moment is directed opposite to the applied field. Diamagnetism is weakly dependent on T.
Diamagnetic (induced atomic moment) effect is overcome in paramagnetic materials, whose atoms have uncompensated magnetic moments. These moments align with the applied field to enhance the latter. Temperature T wants to destroy alignment, hence a strong (1/T) dependence.
Magnetic effects are a completely quantum-mechanical phenomenon, although some classical physics arguments can be made.

6. Example: Magnetic dipoles in a paramagnetic material
Nitric oxide (NO) is a paramagnetic compound. Its molecules have maximum magnetic
moment of ~ mB . In a magnetic field B=1.5 Tesla, compare the interaction energy of the
magnetic moments with the field to the average translational kinetic energy of the molecules
at T=300 K.

7. Alignment of magnetic domains in applied field
Ferromagnetism
Alignment of magnetic domains in applied field
In ferromagnetic materials, in addition to atoms having uncompensated magnetic moments, these moments strongly interact between themselves.
Strongly nonlinear behavior with remnant magnetization left when the applied field is lifted.
Permeability Km is much
larger, ~1,000 to 100,000

8. Magnetization curve for soft iron showing hysteresis
Hysteresis and Permanent Magnets
Magnetization value depends on the “history” of applied magnetic field
Magnetization curve for soft iron showing hysteresis
Example: A ferromagnetic material
A permanent magnet is made of a ferromagnetic material with a M~106 A/m
The magnet is in the shape of a cube of side 2 cm. Find magnetic dipole
moment of a magnet. Estimate the magnetic field at a point 10 cm away on the axis

9. Experiments leading to Faraday’s Law
Electromagnetic Induction – Time-varying magnetic field creates electric field

10. Changing Magnetic Flux
No current in the electromagnet – B=0 - galvanometer
shows no current.
When magnet is turned on – momentarily current appears
as B increases.
When B reaches steady value – current disappears no matter
how strong B field is.
If we squeeze the coil as to change its area – current appears
but only while we are deforming the coil.
If we rotate the coil, current appears but only while we are
rotating it.
If we start displacing the coil out of the magnetic field –
current appears while the coil is in motion.
If we decrease/increase the number of loops in the coil –
current appears during winding/unwinding of the turns.
If we turn off the magnet – current appears while the
magnetic field is being disappearing
The faster we carry out all those changes
- the greater the current is.

11. Faraday’s Law quantified

12. Emf and Current Induced in a Loop
If the loop is made of the insulator, induced emf is still the same
But the resistance is large, so little (or no current) is flowing

13. Circuit with induced EMF only
A1 B1
A2 B2
I1 – I3 I1 I3 R1 R2 R3
Kirchhoff’s rules still apply! It is only the origin of the EMFs that is different here from ordinary batteries.

14. Direction of the induced EMF

15. Alternating current (ac) generators

16. Direct current (dc) generators
Split ring (commutator) does the job of reversing polarity every half cycle