1. European Robotic LABoratory
EURLAB
European
Robotic
LABoratory
How to connect an Arduino

2. What you need an USB cable an arduino board a computer a software
Download here

3. Procedure Connect the card Start the ARDUINO program
Make a program / Open a program
Select your card
Select your serial port
Load your program

4. Connect the card
Connect your Arduino board to your computer using the USB cable.
The Power LED Green (identified by PWR) should light

5. Start the ARDUINO program
Double click the Arduino application
Menu bar
Program editing window
Message area of ongoing actions
display console compiler messages

6. Make a program Open a program Open a program
definition of the constants and variables
Configuration of inputs and outputs
Main function: program content

7. Select your card

8. Select your serial port

9. Load your program click on the upload button Wait a few seconds
You should see the RX and TX LEDs flash on the board
The message " Done uploading" is displayed in the status bar when the upload is completed successfully