1. Module transport

2. Tooling - Module Test & Transport
Transport plate compatible with the entire procedure from module production up to stave assembly. The module will be clamped by a second plate and covered by a cover plate.
This is sufficient protection against bending of the HIC.
 Transport only needs shock absorption and climate regulation
The production of the first prototype is ongoing
Picture taken from Gabriele’s slides

3. An outer box for shock absorption
Disposable, i.e. one time use.
Available all over the world
Industry standard
Carrier plate will be in a sealed N2 filled plastic bag inside this box
 Extra outer cardboard box, any local standard will be ok

4. Volume Carriers will probably not be impressed ~ 2000 modules / 1 year
5 module production sites, batches of 10 modules
 40 shipments/site
5 stave assembly sites, batches of 10 carrier plates
Carriers will probably not be impressed
Local agreements for weekly transport?

5. To be done
Each module production site sends to one stave production site?
Administratively simpler
Less flexible if a site breaks down
Select bag sealing equipment
Within Europe:
Custom rules well known (in Europe)
Some VAT procedures to be investigated?
Several carriers available
Standard insurance
Personal delivery is an option
Insurance unclear US
Need help from local people
Is sending via CERN easier?
Asia
CERN
Going via CERN increases the paper work
Going via CERN requires manpower at cern