0. MicroRAE™

1. Agenda
What is MicroRAE?
Value Proposition
Markets & Applications
Product Features

2. What is MicroRAE? Wireless diffusion 4 gas monitor
Man Down Alarm and GPS capability
Bluetooth® Low Energy / Mesh / Wi-Fi Wireless technologies
For customers that want to go beyond compliance
The MicroRAE, from RAE Systems by Honeywell, is a wireless, portable four-gas detector that brings new capabilities to the ConneXt Safety Solutions (Pack, Plus, Pro and Loneworker) — with a new level of userfriendliness for operators and safety managers. This new four-gas detector, which works with either Wi-Fi
or mesh networks, gives customers another reason to consider wireless gas detection.
MicroRAE has integrated GPS capability, ensuring that customers can determine the precise location of the worker carrying the detector in a ConneXt Plus, Pro or Loneworker system.
The MicroRAE monitors H2S, CO, O2 and LEL with an option to replace one of the sensors with HCN for firefighting applications. But even though these are the four traditional compliance-oriented gases, the MicroRAE targets customers that want to go beyond compliance. These customers, in the “proactive” and “advanced safety” segments, can use real-time visibility on gas detection to drive a culture of safety, productivity and enterprise risk management.
Real time visibility to drive culture of safety, productivity and enterprise risk management

3. Value Proposition
The MicroRAE brings a higher level of user-friendliness and flexibility to wireless gas detection. It enables real-time visibility on safety threats, so you can make faster, more informed decisions to protect your workers, prevent a crisis and optimize operations.
Of course MicroRAE presents a lot of value as a device but it delivers its highest value when combined with other components of a wireless system.
The MicroRAE makes it easy to get the benefits of wireless gas detection — whether you have a Wi-Fi network, mesh network or no wireless infrastructure at all (SC).
The MicroRAE is compatible with all versions of Honeywell’s ConneXt Safety Solutions, giving you real-time visibility on gas status and worker location — so you can make critical decisions in real time.
The MicroRAE is engineered for ease of use — by workers and safety managers — to make customer job easier and facilities safer.
Real-time Visibility On Safety Threats For Faster, More Informed Decisions

4. Applications Advanced Capabilities, No Expertise Required
Industrial Safety
Fire Overhaul
Lone Worker
Easy to Use / Wear
Policy Enforcement
Man Down Alarm
ConneXt Safety Solutions
Man Down Alarm
Easy to Use / Wear
ConneXt Safety Solutions
ConneXt Safety Solutions
GPS
Policy Enforcement
Easy to Use / Wear
Man Down Alarm
Key Industries:
Telecommunications
Construction
Waste Water Treatment
Firefighting
Oil and Gas
Utilities
Petrochemicals
Advanced Capabilities, No Expertise Required

5. Product Features User Friendly Small & Ergonomic design
4.6" x 3.0(2.6)3.0" x 0.9" / 117 x 76(66)74 x 24 mm
7.03 oz / 206 g
Minimal training time
Simple to operate, so workers can focus on the job at hand. The detector has a tamper-proof design, so workers see only what’s necessary for basic operation
Easy to hear and see —reliable alarm awareness in any environment
100dB Alarm
Multi Color backlight screen & LEDs for maximum visibility in challenging conditions
Vibrator Alarm
User Friendly

6. High Quality product can be Used anywhere
Product Features
Designed & Manufactured by RAE Systems by Honeywell
All Sensors from RAE Systems by Honeywell
Wireless solution designed by RAE Systems team
Rugged
Stainless Steel front plate
IP67 (Third Party tested)
Intrinsically Safe
Class I, Division 1, Groups A, B, C and D
IECEX / ATEX I M1 Ex ia I Ma
II 2G Ex ia d IIC T4 Gb
Ta = -20°C to +60°C Ta = -20°C to +60°C
Wireless Approval
Initial territories covered: US/ Canada, Europe (continental), Australia / NZ
Other wireless approval coverage in phases (refer to back up slide)
High Quality product can be Used anywhere

7. Option: Cannot be used in environments hydrocarbon-chain compounds C≥6
Supported Sensors
LEL Sensor
Range
Resolution
Note
Catalytic-bead LEL
0 to 100% LEL
1% LEL
HON manufactured
55 CFs
LEL Sensor Filters
Filtering capacity
Note
H2S filter
10ppm H2S, 720 min
Standard version
H2S + Si filter
10ppm H2S, 240 min
10ppm HMDS, 40min
Option: Cannot be used in environments hydrocarbon-chain compounds C≥6
EC Sensors
Range
Resolution
Note
O2 Liq Electrolyte1
0 to 30% Vol
0.1 % Vol
HON manufactured
CO1
0 to 1,000 ppm
0 – 250 ppm / 1 ppm
251 – 1,000 ppm / 3 ppm
Proven ToxiRAE3
HCN
0 to 50 ppm
0.2 ppm
Cannot be used
with H2S sensor
H2S1
0 to 100 ppm
0 – 50 ppm / 0.1ppm
51– 100 ppm / 1ppm
Certain chemicals inhibit or poison the catalytic bead in LEL (combustible) sensors, leading to partial or complete loss of sensitivity. Poisoning is defined as a permanent degradation, while inhibition is usually recoverable by exposure to clean air.
1Sensor Calibration time around 30s

8. Battery RunTime & Charging Solutions
Configuration
Spec*
-40°C
-20°C
-10°C
20°C
50°C
BLE
15h
2 - 3h h h h
Wi-Fi + GPS
11h h
Mesh + GPS
2 - 5h
11 -13h h
* Specifications are room temperature / brand new battery
Charging Options (Charging time <4h):
Travel charger (Standard accessory)
Cradle charger
Gang charger
Truck Mount

9. All accessories are in the box
“What is in the box?”
Travel Charger
International plug AC adapter
Communication Cable
Everything a customer may need to operate, charge, configure and upgrade the monitor, and download datalogs to PC
No additional charges for software, datalogging, PC communications capability, charging solution, or calibration adapter
Calibration Adapter
Product CD
All accessories are in the box

10. “Up sale” / Protect Revenue-Margin / Differentiator
Optional Accessories
Wrist wrap
Multiple charging options
Auxiliary Filter
Hand pump kit
CSK 1 / CSK 2 (QRAEII / QRAE3 )
AutoRAE 2 Automatic Test and Calibration System
Refer to backup slides section for full details
“Up sale” / Protect Revenue-Margin / Differentiator

11. Bypassing is recorded as a policy violation
Policy Enforcement
Must Bump/Must Cal. features
Prevent instrument use if monitor is not calibrated/bump tested to policy
Configurable: enable/disable: select whether a user can bypass the requirement
“All sensors tested and calibrated” tick mark on UI
Quick visual verification of compliance with bump/calibration policies
IntelliFlash™ behavior
A flashing green light — visible from a distance — that indicates the detector has been bump tested and is monitoring correctly. So you can have peace of mind that workers’ detectors are compliant with government regulation and company policy.
Bypassing is recorded as a policy violation

12. Glance Mode
Want to quickly identify product configuration? Simply press “Y” button to see product configuration.
Product FW version
Product sensors configuration
Sensors Bump test and Calibration information
Wireless (Wi-Fi, Mesh, BLE) and GPS module status

13. Man Down Alarm A critical safety feature of every RAE product
The instrument tracks the time during which it is not moving based on the readings of its motion sensor
If the instrument is motionless when it is not supposed to be, something may be wrong with its user
Can be enabled or disabled
Highly configurable (adjustable sensitivity, timing, etc.)
The Man Down Alarm is not only shown locally on the instrument, but also remotely, over the Wireless Network

14. Ecosystem
Honeywell is constantly evolving and improving to help create safer, smarter workplaces all over the world. With our best-in-class brands, RAE Systems
and BW Technologies, we have developed Honeywell ConneXt Safety Solutions—the most intelligent, real-time wireless gas detection in the market today.
Honeywell ConneXt Safety Solutions is designed to provide 3 main value to our customers:
Proactive safety and risk reduction
Increased productivity and performance
Enhanced health and environmental protection

15. MicroRAE - Qualification Questions
1 – How do you manage real time gas detection readings in high risk area?
2 – Do you have colleagues/ partners that operate in remote locations outside the site? Would you see value in receiving also real time data from their gas monitor?
3 – How do you make sure your current solution is properly calibrated / bump tested according to local regulation and/or company policy?
4 – Is worker location important alongside real time gas detection?
5 – How do you handle lone worker applications?
6 – How long does it take for your current gas monitor to be calibrated?