1. April 3, 2017
Syllabus
Oral 4 Schedule
Action Photos
Dr. Bryan Weber

2. Labview: Most of my $10k order has arrived.
Monday April 3, 2017
Tom Mealy Mechanical Engineer Eng 2, 105
Labview: Most of my $10k order has arrived.
If you met with me on 3-8 in FLC and discussed LV needs me to set up an appointment to get you the hardware you need and get it running. I will set up a basic Labview DAQ file for you to gather data and write it to Excel. Offer some dates and times with a 1 hour window.
If you just needed another module for an existing CDAQ your requirement and I’ll drop the module in chassis and you when I’ve done so.

3. New Blower Motor: Up and running
New Blower Motor: Up and running. Some minor tweaks and upgrades but ready to accept projects. Initial results show a 4 time gain in CFM rates.
me with dates and times you want access, allow a 1 hour window to go over the procedure. I will see Team 19 Wed at noon to gather some data.
Going forward I will be in FLC during the Wednesday class time for help, advice, etc.
Please me to arrange any other times you’d like my help.
-Tom Mealy

4. Spring 2017 Syllabus 11 Mon 3/27 Wed 3/29
Lean Manufacturing: Brian Montanari Habco
Team Meetings – no class 12
Mon 4/3
Wed 4/5
Technical Presentations – Dr. Bryan Weber
Oral presentation 4 12:20-3:20 13
Mon 4/10
Wed 4/12
Fri 4/14
Draft Report 14
Mon 4/17
Wed 4/19
Fri 4/21
Class Meeting
Team meetings
Reports Returned to Teams 15
Mon 4/24
Wed 4/26
Fri 4/28
DEMO DAY– Gampel
Fri 5/5
Revised Design Report due
Final Report

5. Important Dates April 3, 2017 Draft Final Report - Friday April 14
26 days to Demo Day
Draft Final Report Friday April 14
Printed copy
Faculty Advisor

6. Oral 4 Schedule Schedule on Web Page Rev A
Send to sponsors and faculty on Wednesday

7. Oral 4 - Objectives Summarize your results Conclusions/recommendations
Practice for Demo Day & Sponsor presentations
Define Plans to completion

8. Oral 4 Format Title Slide – 1 slide name, teams faculty sponsor, logos
2. Problem Statement
What is the Project/Problem
What are you being asked to do
3. Results – What has been done slides
Analyses Results (Ansys or other)
Models – how it represents the problem
Experiment/test Rig – setup
Summarize in graphs/figures – what do they mean?
Comparison to experimental data – conclusions to date

9. Oral 4 Format 4. Project Schedule –now to completion
5. Your risk analysis – instrumentation, test hardware, analyses
mitigation for highest risks

10. Peer Assessment – Last Slide
7. Peer Assessment - clicker
Team is executing to plan (schedule
Presented results look encouraging
High probability they will meet the project objectives
B. Team is having some problems in executing ,but
They know the issues and have a plan to recover.
Moderate probability they will meet project objectives.
C. Team is having serious problems in executing.
No plan to recover
Low probability they will meet project objectives

11. For the Oral Report Presentation on a flash drive/other
ONE hard color copy of presentation (Stapled)
Into team folder

12. Need Action Photos in your Folder
Pictures with Team Member(s) doing something

13. Mechanical Engineering Senior Design
This document contains technical data not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3).

14. Examples

15. Examples

16. Last Comments
Effort is necessary BUT You are judged on results

17. Guest Presentation
Dr. Bryan Weber
presentation of data and results