1. MKTG 2016

3. Harsh environments
Solutions manufactured from mild steel or aluminium alloy
Single or double wall
Modular cabinets
Monobloc and compact enclosures
Wall-mounting boxes
Terminal boxes
Monobloc control desks
Suspension arm system
Cabinet
OUTDOOR
STAINLESS STEEL
EMC

4. Solutions for outdoor applications
E VIS

5. E VIS solutions for outdoor applications
Perfect protection of the internal components by environmental factors, extreme temperatures, direct sunlight, harsh environments, vandalism and atmospherical, chemical and mechanical agents.
Natural ventilation
Thermal management
Special insulation on request
Technical support for the choice of the most proper ventilation/conditioning unit

6. Wide range
Monobloc structure manufactured from mild steel, aluminium alloy or stainless steel (on request).
Special manufacturing concept (single or double-wall)
Silicone gasket
Special paint finish
Mild steel: epoxy-polyester resin primer and second polyester layer with anticorrosion pigments / Aluminium alloy version: Special painting processwith a single polyester powder coating with zinc base (RAL7035 smooth for the cabinet, Pantone 2717U smooth for roof and plinth).

7. Manufacturing concept
Single wall
Double wall

8. Technical close-up
Thanks to a new design, the side covers are assembled and secured without any screw.
Double-walled frontal door + louvers on the roof + natural ventilation for an easier thermal management of the enclosure

9. Technical close-up
Only 3 screws are needed to assemble the hinged roof to the monobloc structure.
No point of access from outside when the door is closed. Locking system with key.
Big cable entry and fast assembly of the plinth frontal crosspiece for easy wiring

10. Stainless steel solutions

11. Specific material and finishing for each application
OUTDOOR
INDOOR
Off-shore
Food processing
Pharma
Industrial
Harsh environment
Washing / High T
Dust
Mild steel
Stainless steel AISI316L
Stainless steel AISI304L
Double layer of special powder coating for mild steel: epoxy-polyester resin primer and second polyester layer with anticorrosion pigments (RAL7035 smooth for the cabinet, Pantone 2717U smooth for roof and plinth)

12. Solutions in AISI304L or AISI316L complying with EN 12944,
Our plus
Solutions in AISI304L or AISI316L complying with EN 12944,
for specific environments C3 (urban and industrial), C4 and C5 (industrial and marine), or for potentially explosive atmospheres.

13. Specific manufacturing concepts
SILICON SEAL
Resistant to most detergents, hot water jets and easy to clean. Optimal environment conditions for use: - 50° < T < C°
DOORS WITH FORMED CORNERS
Pre-satin AISI304L / AISI316L stainless steel
AISI316L STAINLESS STEEL COMPONENTS
Hinges and screws in contact with external environments are manufactured from stainless steel.
Orthogonal joints laser-welded to E NUX cabinet structure
PRE-SATIN MATERIAL
PVC protective layer and special packaging

14. Electrical enclosures ATEX
E NUX
E COR

15. Certification and classification
Evaluation of ETA technical book
Conformity of the technical book
3) Certification by TUV
1) System certification of the processes related to AtEx products, complying with ISO
2) CE test
3) CE certification for empty enclosures (certificate IMQ10 atex 037 U)

16. Stainless steel suite cabinets
E NUX

17. Technical features E NUX manufacturing concepts
Available in AISI304L and AISI316L
Orthogonal joints manufactured from AISI316L stainless steel and laser welded to the structure
EUPA mounting plate, EUFX side panels, EUZX modular plinth and standard E NUX accessories
Protection rating: IP55, Nema 12, IK10
On request: cabinet with single blank door, in stand-alone or joined in a suite with IP>55 or Nema 4X

18. Further dimensions available on request
Wide range
Standard dimensions available with:
single blank door(12 dimensions)
double blank door (4 dimensions)
plexi door (12 dimensions)
Further dimensions available on request

19. Accessories Plexi door EUFX side panels
EUZX modular plinth or with integrated corners
180° hinges
Shared with E NUX mild steel:
EUPA front inserted mounting plate
EUPL side inserted mounting plate
WE inserts for locking system
Inner accessories

20. Stainless steel monobloc cabinets
E MOX

21. E MOX monobloc cabinets
Monobloc cabinet supplied with front inserted mouting plate
Offered in 12 standard dimensions with single door and 3 with double door
Completely compatible with ETA standard accessories, thanks to the optional inner uprights
Manufactured from AISI304L or AISI316L stainless steel
Protection rating: IP66 (single door), IP55 (double door) - Nema 12 - IK10.

22. Accessories EUPA mounting plate EUPR partial mounting plate
WE locking systems
EUZX plinth with integrated corners
EUMI inner uprights to guarantee compatibility with ETA accessories

23. Stainless steel compact enclosures
E COMP

24. E COMP compact enclosures
For free-standing and wall-mounting applications
Offered in 12 standard dimensions
Completely compatible with ETA standard accessories
Manufactured from AISI304L or AISI316L stainless steel
Protection rating: IP55 - Nema 12 - IK10.

25. Accessories E MOX lifting eyebolts E COR wall-mounting brackets
WE locking systems
EUZX plinth with integrated corners

26. Stainless steel wall-mounting boxes
E COR

27. E COR stainless steel wall-mounting boxes
Completely welded enclosure body without cable entry and supplied with mounting plate provided with slots in the corners.
Door with formed corners and silicone seal, with a reduced dimension of the door angle, in order to permit the door opening in case of E COR boxes placed side by side.
Wide range of accessories (wall-mounting brackets, inner door, modular chassis, DIN profiles, rain canopy, hygienic design locking system and plinth to be ordered separately).
Protection rating: IP66, Nema 4X (single door) - Nema 12 (double door or plexi door), IK10.

28. Wide range
27 standard dimensions with blank door (single or double) + 7 standard dimensions with plexi door.

29. ST-EEX and ECOR-EEX electrical enclosures
Enclosure without cable entry, provided with: door with polyurethane gasket, mounting plate, locking system with zinc body and stainless steel lever, & welded external stud.
25 standard dimensions available with single blank door.
Protection rating: IP66, Nema 4 (ST) e Nema 4X (ECOR), IK10
Ex II 2G
Ex e IIC Gb
Ex II 2GD
Ex tb IIIC Db

30. ECOR-TX solutions with sloped roof
E COR manufacturing concept
Completely welded body with cable entry and mounting plate
Sloped roof, specifically designed for applications in Food industry
7 standard dimensions available with blank door
Protection rating: IP66, Nema 4X, IK10.

31. Accessories
Outdoor application: Rain canopy provided with ventilation louvers
Easy installation of the components: frame for DIN guides and panels, inner door
Cable glands for food, outdoor or harsh environments
Hygienic design for food or harsh environments : locking system with special gasket

32. Stainless steel terminal boxes, push-button boxes and control desks
E GRAN
SHX
ZBX / AEX / MEX / LEX / PEX

33. Innovative locking system with ¼ turn self-captive screws
E GRAN terminal boxes
Boxes supplied with screwed cover provided with formed corners and silicone gasket
6 standard dimensions
Protection rating: IP66, Nema 4X, IK10
Innovative locking system with ¼ turn self-captive screws

34. Innovative locking system with ¼ turn self-captive screws
E GRAN terminal boxes
Boxes supplied with screwed cover provided with formed corners and silicone gasket
6 standard dimensions
Protection rating: IP66, Nema 4X, IK10
Innovative locking system with ¼ turn self-captive screws

35. SHX push-button boxes
Push-button boxes supplied with blank or punched cover (for buttons ø 22,5mm), screwed to the body and supplied with formed corners and silicone corners.
4 standard dimensions with blank cover
6 standard dimensions with punched cover
Protection rating: IP66/IP69K, Nema 4X, IK10

36. Monobloc and modular control desks
ZBX = 4 standard dimensions D=400mm
AEX = 4 standard dimensions D=400 mm
Protection rating: IP55, Nema12.

37. Stainless steel suspension arm system
E RAM

38. E RAM suspension arm system
Housing manufactured from AISI304L and suspension arm system for industrial applications:
4 standard dimensions for the housing, supplied with door with silicone seal
4 versions of suspension arm (I – L - J – S)
Wide range of different joints (fixed/rotating) to be easily assembled by the user
Protection rating (approval pending):
IP66/IP69K, Nema 4X, IK10 for housing

40. Solutions for EMC applications
E NUX ST SD

41. EMC tested solutions
The EC Directive on electromagnetic compatibility applies to equipment and units that can generate/ receive electromagnetic waves and liable to cause interferences, altering the correct functioning of electronic equipment installed in the cabinets.
ETA EMC cabinets and boxes – galvanized on both sides and painted only externally – go beyond the dispositions of the Directive, but they can act as a barrier of the electromagnetic waves which propagate from the internal and external source and have been NEMKO SPA.