1. IP-based 8-port Switched Power Manager
IPM-8220 1

2. Presentation Outlines
Product Positioning
Product Overview
Product Features
Product Applications
Product Comparison

3. Product Positioning 3

4. Product Positioning PLANET IP Power Management Family IP Metered New
IPM Zero U
Hot-swap IP module
SNMP, ,
IP filter, statistic
On-going
Planning
New Phase-in
IP Metered
IPM Desktop
- Sensor, UPS
SNMP, ,
IP filter, statistic
New
IPM U
- Sensor, UPS
- SNMP, ,
IP filter, statistic
New
Switched
IPM-ESB - Accessories
- Temperature
- Humidity
New
4-Port
8-Port
12-Port
16-Port 4

5. Product Overview 5

6. Product Overview IPM-8220 Front View
IEC C13 to C14 power cord for IEC outlet
Power & Alarm LED
8 IEC Power Outlets
LCD Panel (Current, Voltage & IP)
Switch/Set Button (Manual power control)

7. Product Overview IPM-8220 Rear View 10/100Mbps Ethernet Port Breaker
Reset Button
Power Inlet
Temperature & Humidity Sensor
COM Port for API, UPS & Console

8. Product Features 8

9. Product Features Hardware 1U rack-mount design; IEC outlet model
8 power outlets that support real-time image monitoring
8 LEDs show power status for each power outlet
LCD panel displays current, alarm current, voltage and network information
Buzzer will ring when total power consumption value exceeds set value
Circuit breaker avoids damage caused by overload
Versatile sensors supported through environmental sensor box (ESB) inputs
Switch/Set button is set to lock-up protection to avoid modification

10. Product Features – LCD Display
Electric Current Monitored on Display
The local digital display helps installers avoid overloaded circuits by providing a visible warning. 10

11. Product Features – ESB Environmental Sensor Box (ESB)
You may add temperature and humidity sensors to control the power switch by monitoring the environmental changes. 11

12. Product Features Power Distribution Remote Access
Maximum Amps/Inlet: IEC 16A for 1 inlet
Maximum Amps for 8 Outlets: IEC 16A for 8 outlets
Full Frequency Range: 50~60Hz
Supports multiple power control methods – Wake on LAN, System After AC Back, Kill the Power
Remote Access
Remote power control via TCP/IP and a built-in 10/100Mbps Ethernet port
Multi browsers support (IE, Google, Firefox, Safari, Opera, Netscape)

13. Product Features – Remote Management
Remote Management Capabilities
Full-featured network management interfaces of the Switched IPM provide standards-based management via Web, SNMP and Telnet, or by setting the button . 13

14. Product Features Management
Provides Install Wizard to ease users' setting of parameters
Events notification by sending pop-up message, trap, SMS or
Supports Management Information Base (MIB) files for SNMP
Naming support for outlets
Power-on sequencing intelligently turns on/off devices based on event occurrence or planned schedule
Voltage, current, wattage and total kWh report
Sets over-current watchdog for each power outlet
External UPS can be installed for a possible power outage

15. Product Features – Scheduled Power Control
Scheduled Power On/Off
The IP-based Switched Power Manager allows you to pre-define a power schedule for IT equipment. 15

16. Product Features – Overload Protection
The Switched IPM features a built-in 16-amp circuit breaker that can safely reset switch to prevent dangerous circuit overloads from damaging equipment to ensure dependable performance of vital equipment. 16

17. Product Features – Statistic
Energy and Cost Saving
You can also check the current energy consumption in your office within the configuration interface of the Switched IPM. 17

18. Product Features Security
Web page supports 1024-bit SSL security encryption transmission
Supports Secure Socket Layer V3 and Secure Shell V1 protocols
Administrator and multiple users with password protection for double-layer security
IP Filtering -- Address-specific IP security masks to prevent unauthorized access

19. Product Applications 19

20. IP Power Management Application
PLANET Switched IP Power Manager consolidates power control, current monitoring, temperature and humidity monitoring with environmental sensor box (ESB), web page management, message, , and SNMP functions together to enable MIS staff to be informed and thereby to remotely deal with the relevant problems through Internet. 20 20

21. Product Comparison -- External
Model
Features
IPM-8220
ATEN
PE8108
Power Outlet 8
Rating
100–240V~; 50/60Hz; 16A
100–240V~; 50/60Hz; 15A
Sensor Support ■
Wake on LAN -
Firewall
IP, MAC filter
SMS
Notification
Overload Protection
Chart Statistics

22. PLANET IPM Product Comparison
Model
Features
IPM-4220
IPM-8220
IPM-16120
Hardware
Type
Switched (ON/OFF)
IP Metered (Always ON)
Rack Mounting
Desktop 1U
Zero U
Power Outlet 4 8 16
Rating
100–240V; 50/60Hz; 16A
LCD Display
Current, IP
Voltage, Current, IP
Current, Device Temperature, IP
External UPS ■ -
External Sensor

23. PLANET IPM Product Comparison
Model
Features
IPM-4220
IPM-8220
IPM-16120
Management
Management Interface
Web, SNMP, Telnet, console
Web, SNMP, Telnet
Firewall
IP, MAC filter
Schedule Power Control ■ -
Wake On LAN
Notification
Overload Protection
Chart Statistics

24. Appendix - Sales Target
Target Markets
System Integrators
Resellers
Profitable Products
The following are potential to all customers:
IP Power Manager
KVM
PoE Switch
IP PBX

25. Appendix Related Products Model Name Description IPM-4220
IP-based 4-port Switched Power Manager
IPM-8220
IP-based 8-port Switched Power Manager
IPM-16120
IP-based 16-port Metered Power Distribution Unit
IPM-ESB
Environmental Sensor Box

26. Appendix Outlet Port Current Range IPM Type
IP Power Manager Naming Rule
IPM-16120
Outlet Port
IPM Type
Current Range
Outlet Port
04: 4-Port
08: 8-Port
12: 12-Port
16: 16-Port
Current Range
0: Non-A
1: 10A~15A
2: 16A~20A
3: 30A~35A
IPM Type
1: IP Metered PDU
2: Switched PDU