1. SWEA sensor FM model work remaining before delivery
MAVEN-Swea sensor pre-shipping review - December 1-2/2011

2. MAVEN-Swea sensor pre-shipping review - December 1-2/2011
Spare boards preparation (4 days)
Operations tested on spare boards first (to be then applied to FM boards )
- To check procedures on spare boards first and to apply then to FM
- To check UV exposition in order to reduce micro-bio contamination
Modification amplifiers board and shunt JP2 on HVPS board – 2 hours – Microtec
Cleaning HVPS board A with sterile IPA – 2 hours – IRAP
Sticking , coating spare boards plus harness – 0,5 day – IRAP
Drying, outgassing in thermal chamber – 1 night - IRAP
Functionnal test – 2 hours – IRAP
Storing boards in primary vacuum
MAVEN-Swea sensor pre-shipping review - December 1-2/2011

3. MAVEN-Swea sensor pre-shipping review - December 1-2/2011
FM model preparation and conditionning (7 days)
FM boards disassembling after december 3rd (facility/operator not available)
FM boards disassembly - 2 hours - IRAP
Re-work HVPS board harness – 1 day - Microtec
Functionnal test on HVPS board – 2 hours - IRAP
Boards cleaning with sterile IPA and dried with dry nitrogen – 2 hours – IRAP
Exposition of boards to UV lamp (germicide) – 2 hours - IRAP
Coating parts & harness on boards – 1 day – IRAP
Boards drying & outgassing - 1 night - IRAP
Micro-bio assay on FM boards and inside boards housing (to be delivered to SSL)
Instrument assembly, screws torqued – 1 day – Comat/ Microtec/ IRAP
Instrument storage in primary vacuum - IRAP
Assemble Swea sensor with coated and outgassed FM boards
End of calibrations in vacuum chamber
Swea FM sensor ready
Storage in vacuum chamber
MAVEN-Swea sensor pre-shipping review - December 1-2/2011

4. MAVEN-Swea sensor pre-shipping review - December 1-2/2011
Purging adaptation (JR) Swea team has to provide a purging adaptation to fit in SSL purging system - We need to know the interface on SSL side and the tube length on Swea sensor side - On IRAP side : SWAGELOK type SS-QC4-D (to be discussed with SSL)
MAVEN-Swea sensor pre-shipping review - December 1-2/2011

5. MAVEN-Swea sensor pre-shipping review - December 1-2/2011
Log books to be appended Shipping plans and documents: Should we ask for definitive or temporary exportation to the USA for FM sensor? Will Swea sensor be sent back to IRAP in case of big trouble or will it be repaired at SSL?
MAVEN-Swea sensor pre-shipping review - December 1-2/2011

6. MAVEN-Swea sensor pre-shipping review - December 1-2/2011
pinpuller
Top cover
Top deflector
External grid
obturator
bottom deflector
Internal grid
Ribs (6)
Ext. hemisphere
Int. hemisphere
MCPs + holder
Anode board
Boards housing
Amplifiers board
Shield
HVPS board
Purging tube
Swea sensor cutoff
MAVEN-Swea sensor pre-shipping review - December 1-2/2011