1. Power off the mobile ,take out the SIM,T-FLASH CARD ,take out the screw (4pcs)

2. Open the battery cover

3. Open the battery cover from this side

4. Open the battery cover

5. 取出电池盖（尾部开口处）

6. Take out the screw of housing

7. Open the housing B from this side

8. Open the housing connector

9. Opening the housing B

10. Housing B opend

11. Tool : electric soldering iron ,350℃
solder and disassembly the motor and MIC;
Tool : electric soldering iron ,350℃

12. Take out the FPC of volume key from the housing A

13. Disassembly the conductive fabric of MIC from the PCBA

14. Disassembly the FPC of TP :
a, unlock the TP connector (up);b, take out the FPC of TP;

15. The screw of PCBA

16. Open the PCBA

17. Disassembly the Light-sensitive sensor shelf

18. Take out the malar

19. Tool : electric soldering iron ,350℃
solder and take out the Front camera, the rear camera, LCD, Volume key,flashlight;
Tool : electric soldering iron ,350℃