1. How to make the basic car
Dragsters
How to make the basic car

2. A short length of 28mm tube
You will need ...
A sheet of paper
Wheels
Scissors
Axles
A short length of 28mm tube
Sticky tape
Drinking straws

3. Roll the paper into a cylinder around the short length of tube

4. Tape the end firmly to the tube

5. Put tape along the edge of the paper

6. Put tape over the top to make the one end of the cylinder air tight

7. Next cut the drinking straws so they are slightly shorter than the axles

8. Put the axles inside the straws

9. Push the wheels onto the axles

10. Tape the straws to the body

11. Finished!