Download presentation
Presentation is loading. Please wait.
1
Chpt. 4: The Periodic Table
2
In this Chapter............ What is an element???
Chemists and order among the elements The Periodic Table Periodic Table & arrangement of electrons in atoms
3
Robert Boyle from Co. Waterford
first chemist to define the meaning of the word element An element is a chemical substance that cannot be split up into simpler substances by chemical means.
4
History of the Elements
1. The Greeks (400 B.C.) The Greeks believed that there were four elements from which everything else was made: - earth - air - water - fire
5
2. Robert Boyle (1661) Boyle described elements as “primitive and simple substances”. This is close to the modern definition: “An element is a substance that cannot be split up into simpler substances by chemical means Predicted that compounds were made from and could be broken down into elements
6
3. Humphry Davy (early 1800’s):
Used electricity to separate compounds into their elements He discovered potassium, sodium, calcium, barium, strontium and magnesium
8
4. Henry Moseley (1914): Using X-Rays he discovered a method of determining the number of protons in the nucleus of an atom. The atoms of each element have different numbers of protons in them i.e. no two elements have the same number of protons No. of protons = Atomic No.
9
History of the Periodic Table
After 1800’s more and more elements were being discovered and it was becoming increasingly difficult to understand and memorise all the properties of each element. Four men were responsible for bringing order among the elements in the form of the Periodic Table: - Johann Dobereiner - John Newlands - Dmitri Mendeleev - Henry Moseley
10
The Periodic table was designed to classify
elements according to their properties and to show trends in their physical and chemical properties The main groups are: I – Alkali metals; II – Alkaline earth metals; VII – Halogens; VIII (also called group 0) – Noble/inert gases. The elements between groups II and III are called the D-block or transition metals.
11
1. Dobereiner’s Triads (1829):
Studied the properties of various elements in a bid to find order Discovered that when looking at some groups of three elements they had similar chemical properties and the atomic weight of middle element was average of the other two elements Group of three similar elements called a triad
12
Dobereiner’s Triads A triad is a group of three elements with similar chemical properties in which the atomic weight of the middle element is approximately equal to the average of the other two.
13
2. Newlands Octaves (1864): John Newland arranged known elements in order of increasing atomic weights. Noticed properties seemed to repeat every eight elements.
14
Newlands Law of Octaves
An octave is a group of elements arranged in order of increasing atomic weight, in which the first and the eighth element of each group have similar properties
15
Problems with Newlands Octaves
The properties repeat every 8 as noble gases hadn’t been discovered yet! There were several problems such as iron being grouped with oxygen and sulphur. Newlands tried to force all of the known elements into the table instead of leaving gaps for elements not yet discovered example: Li and Ag in same group.
16
3. Mendeleev’s Periodic Table (1869):
Dmitri Mendeleev listed all known elements (63) in order of increasing atomic weight and again noticed similar properties on every eight element. Mendeleev left gaps and predicted elements that had not been discovered.
17
Mendeleev’s Periodic Law
When elements are arranged in order of increasing atomic weight (relative atomic mass), the properties of the elements vary periodically.
18
Mendeleev: What he did: Put elements with the same properties in the same vertical group. Left gaps to make the elements fit into the proper column (group). Predicted that elements (eg. Germanium and Gallium) would be discovered to fill these gaps. Predicted their properties. Reversed the order of some elements so that their properties matched their group e.g. Te and I
19
Mendeleev's Periodic Table
20
Mendeleev: Gained acceptance when: new elements discovered fitted properties predicted reversals justified by discovery of atomic number
21
Moseley studied the frequencies of the
x-rays emitted by atoms of different elements. Found frequencies varied depending on the amount of positive change. , In other words the difference between the elements is the number of protons in the nucleus Discovered method for determining number of protons in nucleus of an atom – known as atomic number
22
Atomic Number The atomic number of a atom is the number of protons in the nucleus of that atom *Note: Once the atomic number was known it was seen that Mendeleev’s table was in order of increasing atomic number.
23
The Modern Periodic Table
The modern Periodic Table is an arrangement of elements in order of increasing atomic number The Periodic Law When elements are arranged in order of increasing atomic number, the properties vary periodically
24
Mendeleev’s Periodic Table
Modern Periodic Table Elements listed in order of increasing atomic weight (mass) Elements listed in order of increasing atomic number Noble gasses missing (undiscovered) Noble gasses now included as Group 8 or 0 No atomic numbers listed (undiscovered) Atomic numbers now listed, discovered by Moseley d-Block (transition) elements arranged as sub groups d-Block (transition) elements now listed in a separate block Gaps left for undiscovered elements All gaps filled
25
Attention: New Additions to Periodic Table
WOMANIUM (WO) Physical properties: Generally soft and round in form. Boils at nothing and may freeze any time. Very bitter if not used well. Chemical properties: Very active and highly unstable. Possesses strong affinity with gold, silver, platinum, and precious stones. Violent when left alone. Turns slightly green when placed next to a better specimen. Usage: An extremely good catalyst for dispersion of wealth. Caution: Highly explosive in inexperienced hands! MANIUM (XY) Physical properties: Solid at room temperature but gets bent out of shape easily. Difficult to find a pure sample. Due to rust, aging samples are unable to conduct electricity as easily as young samples. Chemical properties: Attempts to bond with WO any chance it can get. Also tends to form strong bonds with itself. Becomes explosive when mixed with Childrium for prolonged period of time. Usage: Possibly good methane source. Caution: In the absence of WO, this element rapidly decomposes and begins to smell.
26
Uses of the Periodic Table
Obtaining atomic numbers and mass numbers Obtaining relative atomic masses Writing electronic configurations.
27
Atomic Number & Atomic Mass Number
Atomic Number (Z): number of protons an element has smaller of the two numbers Atomic Mass Number (A): - of an element is the sum of the number of protons and neutrons in the nucleus of an atom of that element - larger of the two numbers - unit = atomic mass unit a.m.u. 1 a.m.u. = 1.66 x 10-24g - always a whole number
28
Nuclear Formula of an element
29
Using the Nuclear Formula – Sample Questions
How many protons, neutrons and electrons are in the following: i) 3517 Cl ii) 4521Sc3+
30
Mass Spectrometry 1919 an instrument called mass spectrometer was built to measure the mass of atoms.
31
Mass Spectrometer
32
Isotopes Isotopes are atoms of the same element (i.e. they have the same atomic number) that have different mass numbers due to different numbers of neutrons in the nucleus. Since the neutron has no charge, the quantity of neutrons in an atom can change slightly without having an effect on the atom. Example: Neon – 2 isotopes, Chlorine – 2 isotopes, Carbon – 3 isotopes and Hydrogen – 3 isotopes
33
3 Isotopes of Hydrogen
34
3 Isotopes of Carbon
35
Calculating the average mass of an atom:
A sample of chlorine is found to consist of 75% 3517Cl and 25% 3717Cl . Calculate the average mass of an atom of chlorine. Average Mass = (Mass isotope 1 x % abu) + (Mass isotope 2 x % abu) 100
36
Relative Atomic Mass (Atomic Weight) Ar
The relative atomic mass (Ar) of an element: - is the average of the mass numbers of the isotopes of the element, - as they occur naturally, - taking their abundances into account and, - expressed on a scale in which the atoms of the carbon-12 isotope have a mass of exactly units. (average mass of an atom, measured relative to the mass of the carbon -12 isotope)
37
The carbon-12 isotope has a perfect mass of 12amu.
1/12 of this mass is a perfect 1.000 All average masses represented on the periodic table are compared to this value of We therefore say that these atomic masses are relative to the mass of 1/12th of the C-12 isotope. Ratio: Ar= mass of atom of element 1/12 mass of atom of carbon-12 Note: ratio therefore no units
38
Relative Atomic Mass Calculations
Formula: Ar= (Mass isotope 1 x % abu) + (Mass isotope 2 x % abu) 100
39
Example 1: An element, X, consists of 92.2% atoms with a mass 28, 4.7% of atoms with a mass 29 and 3.1% of atoms with a mass 30. What is the relative atomic mass? What is the element?
40
Example 2: The two isotopes of chlorine have mass numbers of 35 and 37 respectively. Taking the relative atomic mass of chlorine to be 35.46, calculate the % of each isotope present in the element
41
Writing Electronic Configurations
is the arrangement of electrons in an atom two methods: - Bohr Model – in terms of energy levels (simple) - Energy sublevels
42
Bohr Model Method: Find atomic number of element. As all elements are neutral - number of protons equals number of electrons. Remember: n = 1 energy level holds 2 electrons n = 2 energy level holds 8 electrons n = 3 energy level holds 8 electrons n = 4 energy level holds 18 electrons
43
Bohr Model Example: Write the electronic configuration for potassium showing the number of electrons in each main energy level. From periodic table potassium has atomic number 19 therefore since neutral atom: no. of protons = no. of electrons = 19 1st energy level = 2 e- 2nd energy level = 8 e- 3rd energy level = 8 e- 4th energy level = 1 e- So, electronic configuration of potassium is (2,8,8,1)
44
Try the following: Write the electronic configuration for the following showing the number of electrons in each main energy level: i) Fluorine ii) Calcium Note: - you must be able to write the electronic configurations of the first 20 elements in terms of the number of electrons in each main energy level. - number of electrons in outer shell is same as group number e.g. Lithium group I has one outer electron, Boron group III has three outer electrons
45
Electrons in each Shell
Element Atomic No. Electrons in each Shell Electric Config. n=1 n=2 n=3 n=4 H 1 He 2 Li 3 2,1 Be 4 2,2 B 5 2,3 C 6 2,4 N 7 2,5 O 8 2,6 F 9 2,7
46
Electrons in each Shell
Element Atomic No. Electrons in each Shell Electric Config. n=1 n=2 n=3 n=4 Ne 10 2 8 2,8 Na 11 1 2,8,1 Mg 12 Ca 20 2,8,8,2
47
Electron Configuration - in terms of sublevels
Remember: Main energy level Sublevel
48
Electronic Configuration – in terms of sublevels
An energy sublevel is a group of orbitals, within an atom, all having the same energy. One orbital in an ‘s’ energy sublevel Three orbitals in a ‘p’ energy sublevel - X, Y, Z Five orbitals in a ‘d’ energy sublevel In terms of energy s<p<d<f. Electrons will fill sublevels in order of increasing energy.
49
S sublevel (orbital) can hold 2 electrons
P sublevel can hold 6 electrons, 2 in each px, py and pz orbital d sublevel can hold 10 electrons, 2 in each of the 5d orbitals
50
Electrons – 2 in each orbital
Main Energy Level – 1, 2, 3, 4 etc. Sublevel – s, p, d, f Orbitals – 1s, 2s, 2px etc. Electrons – 2 in each orbital
51
Aufbau Principle Aufbau Principle states that when building up the electronic configuration of an atom in its ground state , the electrons occupy the lowest available energy level. 1s orbital must be filled before the 2s, 2s must be filled before 2p, etc…. Electronic Configuration Order: 1s, 2s, 2p, 3s, 3p, 4s, 3d, 4p, 4d, 4f (4s is lower in energy than 3d)
53
Writing Electronic Configurations
No. of electrons 2p5 Main energy level Type of sublevel
54
Example 1: Write the electronic configuration (s, p) for an atom of oxygen Solution: Determine number of electrons in oxygen Place the electrons into sublevels according to Aufbau Principle and using periodic table Remember – s sublevel 2 electrons - p sublevel 6 electrons - d sublevel 10 electrons Try: Write the electronic configuration for the elements from 1 to 24.
55
Exceptions to the rule:
Remember: The ‘4s’ energy sublevel is slightly lower in energy than the ‘3d’ energy sublevel. Therefore, its orbital must be filled with electrons before the orbitals in the 3d sublevel. If p, d and f shells are exactly half filled or completely filled they will have extra stability: 24) Cr = 1s2, 2s2, 2p6, 3s2, 3p6, 4s1, 3d5 29) Cu = 1s2, 2s2, 2p6, 3s2, 3p6, 4s1, 3d10
56
You must be able to write the electronic configurations of the first 36 elements in terms of their s, p, d configurations!!!
57
Electronic Configuration of Ions
Ion – atom that has lost or gained electrons (has a charge on it) - loses electrons = positively charged ion - gains electrons = negatively charged ion Example: What is electronic configuration of Al3+ ion? What neutral atom has the same configuration?
58
Try: Write the electronic configuration (s, p) of the S2- ion. What neutral atom has the same configuration?
59
Example 2: Identify the species represented by [ 1s2, 2s2, 2p6]2+
60
Try: Identify the species represented by: [1s2, 2s2, 2p6, 3s2, 3p6]2-
61
Arrangement of electrons in orbitals of Equal Energy
The electronic configuration of nitrogen is: 1s2, 2s2, 2p3 The question is how are the three electrons in the p sublevel distributed among the three p orbitals – x, y, z? Answer: Hund’s Rule of Maximum Multiplicity (Bus Seat Rule) Hund’s Rule of Maximum Multiplicity states that when two or more orbitals of equal energy are available, the electrons occupy them singly before filling them in pairs
62
Electronic Configuration of Nitrogen using Hund’s Rule:
Before After: 1s2, 2s2, 2p3 1s2, 2s2, 2px1, 2py1, 2pz1 2p sublevel – 1e- will enter px orbital - 1e- will enter py orbital - 1e- will enter pz orbital
63
Using ‘Arrows-in-Boxes’ Diagrams:
Distribution of electrons in nitrogen p sublevel: Box = orbital Arrow = direction of spin of electron Arrows represent spinning of electrons on own axis as they revolve around nucleus Electrons can spin in either a clockwise direction or an anti-clockwise direction px py pz
64
Pauli Exclusion Principle
The Pauli Exclusion Principle states that no more than two electrons may occupy an orbital and they must have opposite spin. Note: = electron spinning clockwise = electron spinning anti-clockwise
65
Complete ‘arrows-in-boxes’ diagrams and the extended form of electronic configurations for the first ten elements Note The ‘arrows-in-boxes’ diagrams or extended forms of electronic configurations need only be given if you are specifically asked about the distribution of electrons in the p sublevel.
Similar presentations
© 2025 SlidePlayer.com. Inc.
All rights reserved.