1. WIRELESS POWER TRANSFERIN
3D SPACE
Submitted By

2. Introduction
The main objective of this project is to develop a system of wireless power transfer for medical applications.
Many people use pace makers implanted in their body that runs on a battery.

3. FUTURE SCOPE
The project can be enhanced in future up to 1 meter distance in space using resonators with a Q factor of 1,000 enabling it to send power over a distance 9 times the radius of the coil of 11 CMs .

4. Contents Introduction Block diagram Hardware requirements Power supply
Schematic diagram
Working of the project
Advantages
Applications
Conclusion

5. Block diagram

6. Hardware requirements
HIGH FREQUENCY TRANSFORMER
RECTIFIER
FILTER
VOLTAGE REGULATOR
TRANSISTOR
COIL
LED
1N4007
RESISTOR
CAPACITOR

7. Hardware Components description
1.Design of HF transformers

8. Hardware Components description
2. Using In4007 as Bridge rectifier
3. Capacitors Filter(470µf)
4. 5v Regulator
5. Relay

9. 7. LED
6.COIL
8. RESISTOR

10. DESCRIPTION AND WORKING
Please refer CD

11. 11. Capacitor

12. Description of HF transformers
Electric power transmission over long distances.
High-voltage direct-current HVDC power transmission systems
Large, specially constructed power transformers are used for electric arc furnaces used in steelmaking.
Rotating transformers are designed so that one winding turns while the other remains stationary.
A common use was the video head system as used in VHS and Beta video tape players.
These can pass power or radio signals from a stationary mounting to a rotating mechanism, or radar antenna.