1. CVILUX NEW PRODUCT INTRODUCTION

2. FFC FPC Conn Wire to Board Power Board to Board Phone Jack
1996
2000
2002
2003
2004
TABLE OF CONTENT
FFC FPC Conn
Wire to Board
Power
Board to Board
Phone Jack
I O & Sim Card
CF11　　1.00mm pitch
CI01　　2.00mm pitch
CP25　　2.50mm pitch
CB03　　1.00mm pitch
CJE1　　3.5mm pitch
CSM1　　Dual Type
CF31　　1.00mm pitch
CI14　　1.00mm pitch
CP mm pitch
CB12　　1.00mm pitch
CSM3　　Dual Type
CF35　　0.50mm pitch
CI22　　2.50mm pitch
CB22　　2.00mm pitch
CSM2　　Micro Sim C
CF35B mm pitch
CI30　　2.50mm pitch
CU02　　 USB 2.0 Type B
CF42　　0.50mm pitch
CI40　　1.25mm pitch
CU18　　 USB 3.1 Type C
Board to Board
CF50　　0.50mm pitch
CI40B mm pitch
CU18B　 USB 3.1 Type C
CF50B　 0.50mm pitch
CI52　　 7.92mm pitch
CU18C　 USB 2.0 Type C
USB 2.0 Type C
CF50C　 1.00mm pitch
CI60　 　2.50mm pitch
CH07　　1.00mm pitch
CF50D　 1.00mm pitch
CID1　　4.00mm pitch
CH16　　1.00mm pitch
CF50E　 0.50/1.00mm pitch
CID7　　2.54mm pitch
CF58　　0.30mm pitch
CIDJ　　 2.40mm pitch
CF65　　0.50mm pitch
CIDL　　 1.25mm pitch
CF65B　 1.00mm pitch
CIDM 　 1.25mm pitch
CF69　　0.50mm pitch
CIL4　 　2.50mm pitch

3. FFC/FPC CONNECTOR

4. FFC/FPC CONNECTOR No. of Circuits: 04 to 20 Receptacle
Matte Tin over nickel
SMT Type
Downside contact
Tube/Reel Packing
Height 2.7mm
Back flip
Special Locking Type
For increasing retention force

5. FFC/FPC CONNECTOR No. of Circuits: 04 to 40 Receptacle
Gold flash over nickel
SMT Type
Downside Contact
Reel Packing
Height 0.96mm
Special Locking Type
For increasing retention force

6. Other Suppliers FFC/FPC CONNECTOR COMPANY SERIES PANASONIC Y5BW
No. of Circuits: 04 to 29
(Available: 8)
Receptacle
Matte Tin/Gold flash over nickel
SMT Type
Dual Side Contact
Reel Packing
Back flip
Height 0.96mm
Special Locking Type
For increasing retention force

7. FFC/FPC CONNECTOR No. of Circuits: 12 Receptacle
Matte Tin/Gold flash over nickel
SMT Type
Downside Contact
Reel Packing
Height 1.46mm
Special Locking Type
For increasing retention force
With PEG

8. FFC/FPC CONNECTOR No. of Circuits: 0.5mm:12,20,26 1.0mm:10 Receptacle
Matte Tin/Gold flash over nickel
SMT Type
Downside Contact
Tube/Reel Packing
Height 1.5mm
Special Locking Type
For increasing retention force

9. FFC/FPC CONNECTOR No. of Circuits: 07-61 (Available:7,11,23,26)
Pitch:0.3mm
Receptacle
Matte Tin/Gold flash over nickel
SMT Type
Dual side Contact
Reel Packing
Height 0.9mm
For spec. detail, please refer to the catalogue

10. FFC/FPC CONNECTOR No. of Circuits: 04 to 35 (Available: 18) Receptacle
Matte Tin/Gold flash over nickel
SMT Type
Top Entry
Reel Packing
Height 5.5mm
Special Locking Type
For increasing retention force

11. FFC/FPC CONNECTOR SPECIFICATION No. of Circuits: 03 to 18
(Available: 8)
Receptacle
Matte Tin/Gold flash over nickel
SMT Type
Top Entry
Reel Packing
Height 5.5mm
Special Locking Type
For increasing retention force
SPECIFICATION

12. WIRE TO BORAD CONNECTOR

13. Other Suppliers WIRE TO BOARD CONNECTOR SPECIFICATION COMPANY SERIES
JST
KRD Series
Standard
SPECIFICATION
No. of Circuits: 12
1=Matte over nickel
IDC Type
Height:
Crimp Type: Height 6.8mm
IDC Type: Height 7.25mm
Color: A0 = Nature (#26)
A6 = Green (#28)

14. Other Suppliers WIRE TO BOARD CONNECTOR SPECIFICATION COMPANY SERIES
JST
NR Series
Standard
SPECIFICATION
No. of Circuits: 02-15
IDC Type
Terminal Plating:
1=Matte tin over nickel
2=Gold flash over nickel

15. Other Suppliers WIRE TO BOARD CONNECTOR COMPANY SERIES JST XH SERIES
No. of Circuits: V: ; H: 02-15
1=Tin over nickel
K0 (Pin kinked) = Standard
V type and H type With Locking Wall
Additional locking unit for secure
connection
＊Caters to the market demand

16. Other Suppliers WIRE TO BOARD CONNECTOR COMPANY SERIES JST GH Series
Mating with CI40 HOUSING
COMPANY
SERIES
JST
GH Series
No. of Circuits: 02-15
Vertical and Horizontal SMT
1=Matte Tin over nickel
Tape&Reel Packing
*Locking slot provides secure
mating to avoid pin damage

17. Other Suppliers WIRE TO BOARD CONNECTOR COMPANY SERIES JST GH Series
HOUSING
　No. of Circuits: 02-15
TERMINAL
　Plating: 1=Tin over nickel
　T01 = AWG #26~#30
　Reel packing
　Material: P = Phosphor Bronze
(elastic and anticorrosion)

18. Other Suppliers WIRE TO BOARD CONNECTOR COMPANY SERIES JST
VA/NVA SERIES
No. of Circuits: 02
Widest Pitch (previous: 7.5mm)
1=Matte Tin over Nickel
Vertical and Horizantal
＊With Plastic Board
Lock which feature JST
does not possess.

19. Other Suppliers WIRE TO BOARD CONNECTOR COMPANY SERIES JST XA Series
HOUSING
　No. of Circuits: 02-15
　Gold flash over nickel
With Locking Latch
　Color Nature
DIP HEADER
　1 = Tin over Nickel
　Ｖertical
　K0 = With Pin Kinked
＊Caters to the market demand

20. WIRE TO BOARD CONNECTOR
HOUSING
　No. of Circuits: ONLY 03 pin
　With Locking Latch
　NH = Halogen-Free
HEADER
　SMT
　1 = Matte Tin over Nickel
　Horizontal
　Reel Packing
＊With Iron Shield for insulation
protection from damage
We used to have 1.00mm pitch,
now we have 1.25mm
For spec. detail, please refer to the catalogue

21. Other Suppliers WIRE TO BOARD CONNECTOR COMPANY SERIES YEONHO
No. of Circuits: 02
SMT Type1 = Matte Tin over nickel
Horizontal
Tape & Reel
＊Light bar application
＊Sink Board Type with fixed tab
＊Simplify the production process
* Mating with PCB only

22. WIRE TO BOARD CONNECTOR
No. of Circuits: 02-15
SMT
1 = Matte Tin over nickel
Vertical and Horizontal
Tape&Reel
Color Nature and Black
＊Caters to the market demand
For spec. detail, please refer to the catalogue

23. POWER CONNECTOR

24. POWER CONNECTOR No. of Circuits: 3 Receptacle Gold flash over nickel
SMT Type
Reel Packing
For battery charging

25. POWER CONNECTOR No. of Circuits: 2,4 Receptacle Gold flash over nickel
SMT Header-Vertical
Mate with PCB
High voltage
Application: Light bar
＊Cost saving –
Mating PCB without the
housing and terminal

26. BOARD TO BOARD CONNECTOR

27. BOARD TO BOARD CONNECTOR
No. of Circuits: 02 to 50
Receptacle
Gold flash over nickel
SMT Type
DIP Type
Smallest pitch.
1.27mm used to be smallest

28. Other Suppliers BOARD TO BOARD CONNECTOR COMPANY SERIES SAMTEC MLE
No. of Circuits: 06 to 100 Receptacle
Gold flash over nickel
SMT Type
Mate with either side
Smallest pitch
1.27mm used to be smallest

29. Other Suppliers BOARD TO BOARD CONNECTOR COMPANY SERIES SAMTEC MMS
No. of Circuits: 02 to 40
Receptacle
Gold flash over nickel
TOP ENTRY-DIP Type
-SMT Type
SIDE ENTRY-DIP Type

30. PHONE JACK CONNECTOR No. of Circuits: 06 Receptacle
Gold flash over nickel
Mounting Style:
Middle DIP- Menu 1
TYPE:
Bevel+ Forward- Menu 1

31. PHONE JACK CONNECTOR No. of Circuits: 06 Receptacle
Gold flash over nickel
Mounting Style:
Middle DIP+SMT-Menu 2
TYPE:
Bevel+ Reverse -Menu 2

32. PIN HEADER CONNECTOR

33. PIN HEADER CONNECTOR No. of Circuits: 2-40 Gold flash over nickel
Type: Side Entry SMT
Vertical Dip Type
Horizontal Dip Type
Smallest pitch
＊Caters to the market demand
For spec. detail, please refer to the catalogue

34. PIN HEADER CONNECTOR No. of Circuits: 6-100 Gold flash over nickel
SMT Type
Smallest pitch
＊Caters to the market demand

35. SIM CARD CONNECTOR

36. SIM CARD CONNECTOR A00: Height = 1.5mm
Selective Gold plated flash over nickel
B00: Height= 1.18mm
For spec. detail, please refer to the catalogue

37. SIM CARD CONNECTOR Dual Type for double SIM cards
Selective Gold flash over nickel
For spec. detail, please refer to the catalogue

38. SIM CARD CONNECTOR

39. I/O CONNECTOR SPECIFICATION No. of Circuits: 40 Receptacle
Gold flash over nickel
SMT Type
Tape&Reel
Height 5.4mm
＊Caters to the market demand
SPECIFICATION

40. I/O CONNECTOR
Transfer speed: Gen 1: 5G, Gen 2: 10G

41. We are committed to enhancing product quality and stability, to obtain customer's trust and satisfaction.