1. Required Drawings and Info for Formwork or Scaffold Design
Bridge, Rock Shed, Box Culvert, Building for Example

2. Bridge Construction Superstructure ─ Viaduct, Box girder
Substructure ─ Pier Cap

3. Superstructure Types Box Girder T-type Girder I-type Girder
Rectangle Girder

4. The name of each part of the superstructure
Jersey barrier
Slab
Girder
Pot Bearing

5. The name of each part of the superstructure
Jersey barrier
Slab
Flange Slab
Top Slab
Intermediate wall
Web
Bottom Slab

6. Substructure
Pier Cap
Substructure
Column
Pile Cap
Pile

7. Required drawings & Info for Bridge design
Structural Drawings of Plan, Section & Elevation layout
Elevation Level (Design Elevation, Ground Elevation etc.)
Sepecial Requirement:
Overpass traffic road: width & height for Clearance
Overpass river: width & elevation of river

8. Required drawings & Info for Bridge design
Elevation layout
Plan of Top Slab
Plan of Bottom Slab

9. Required drawings & Info for Bridge design
Dimensions of Typical Section

10. Required drawings & Info for Bridge design
Rebar design drawings are Not Required

11. Required drawings & Info for Bridge design
Plan View
Elevation Level (EL, GL etc.)

12. H W
Overpass Requirement

13. EL. ▽ W
EL. ▽
EL. ▽
Overpass Requirement

14. Rock Shed

15. Rock Shed Top Slab Retaining Wall Beam or Girder Side Wall Column
Foundation

16. Required drawings & Info for Rock Shed design
Structural Drawings of Plan, Section & Elevation layout
Elevation Level (Design Elevation, Ground Elevation etc.)

17. Required drawings & Info for Rock Shed design
Structural Plan

18. Required drawings & Info for Rock Shed design
Elevation layout
Section Detail
Section

19. Required drawings & Info for Rock Shed design
Rebar design drawings are Not Required

20. Required drawings & Info for Rock Shed design
Plan View
Elevation Level (EL, GL etc.)

21. H W
Overpass Requirement

22. Box Culvert

23. Box Culvert Types Traffic Box Culvert Drainage box culvert
Pipeline box culvert

24. Required drawings & Info for Box Culvert design
Plan View

25. Required drawings & Info for Box Culvert design
Dimensions of Typical Section

26. Required drawings & Info for Box Culvert design
Elevation Layout

27. Building, Factory, Warehouse

28. Required drawings & Info for Building design
Structural Plan

29. Required drawings & Info for Building design
Beam size
Structural Plan
Girder size
Column size
Dimension Tables of Beam, Girder, Slab & Column
Slab thickness

30. Required drawings & Info for Building design
Floor Height
Structural Section

31. Required drawings & Info for Building design
FL (Floor Level),
GL (Ground Level)
For Shoring Design
Structural Elevation Layout

32. Others Requirements for Design
Plywood
Thickness: 15mm or 18mm or 20mm
Second Bearer
Timber or Wooden Beam or LVL or H20 or TopBeam
Main Bearer
H-Beam or BaseBeam
Special site conditions
Clearance or Headroom for traffic line;
Tableform for Building construction
Movable Shoring Block Design, etc.

33. Rebar or tendon drawings are Not Required.
Checklist
Item
Check
Note
Structural Plan Drawings □
Rebar or tendon drawings are Not Required.
Structural Layout Drawings
Structural Section Drawings
Elevation Levels
GL., EL., etc.
Material & Dimensions of Plywood
Material & Dimensions of Second Bearer
Material & Dimensions of Main Bearer
Special site conditions or requirements:
Overpass for traffic line: Width Required is __m, Clearance Required is __m.
Overpass for river: River Width is __m,
Others: ____________________________________________________.
※CAD files will be better for Design