1. Understanding QlikView Web Parts for SharePoint
Marcus Spitzmiller
Enterprise Architect
1/31/2012

2. Safe Harbor Statement
This Presentation contains forward-looking statements, including, but not limited to, statements regarding the value and effectiveness of QlikTech's products, the introduction of product enhancements or additional products and QlikTech's growth, expansion and market leadership, that involve risks, uncertainties, assumptions and other factors which, if they do not materialize or prove correct, could cause QlikTech's results to differ materially from those expressed or implied by such forward-looking statements. All statements, other than statements of historical fact, are statements that could be deemed forward-looking statements, including statements containing the words "predicts," "plan," "expects," "anticipates," "believes," "goal," "target," "estimate," "potential," "may", "will," "might," "could," and similar words. QlikTech intends all such forward-looking statements to be covered by the safe harbor provisions for forward-looking statements contained in Section 21E of the Exchange Act and the Private Securities Litigation Reform Act of Actual results may differ materially from those projected in such statements due to various factors, including but not limited to: risks and uncertainties inherent in our business; our ability to attract new customers and retain existing customers; our ability to effectively sell, service and support our products; our ability to manage our international operations; our ability to compete effectively; our ability to develop and introduce new products and add-ons or enhancements to existing products; our ability to continue to promote and maintain our brand in a cost-effective manner; our ability to manage growth; our ability to attract and retain key personnel; the scope and validity of intellectual property rights applicable to our products; adverse economic conditions in general and adverse economic conditions specifically affecting the markets in which we operate; and other risks more fully described in QlikTech's publicly available filings with the Securities and Exchange Commission. Past performance is not necessarily indicative of future results. The forward-looking statements included in this presentation represent QlikTech's views as of the date of this presentation. QlikTech anticipates that subsequent events and developments will cause its views to change. QlikTech undertakes no intention or obligation to update or revise any forward-looking statements, whether as a result of new information, future events or otherwise. These forward-looking statements should not be relied upon as representing QlikTech's views as of any date subsequent to the date of this presentation.
This Presentation should be read in conjunction with QlikTech's periodic reports filed with the SEC (SEC Information), including the disclosures therein of certain factors which may affect QlikTech’s future performance. Individual statements appearing in this Presentation are intended to be read in conjunction with and in the context of the complete SEC Information documents in which they appear, rather than as stand-alone statements.

3. QlikView Web Parts for SharePoint
What it is
Benefits
Adding a Web Part to SharePoint
Licensing
This session will discuss QlikView Web Parts for SharePoint. During this session, we will discuss what QlikView for Web Parts is, the benefits of using it, as well as an Architectural overview. This session is intended for a more technical audience who are interested in getting a general understanding of QlikView's integration with SharePoint. Marcus Spitzmiller All Partners, PreSales and Developer Roles Please Complete

4. What is QlikView Web Parts for SharePoint?
A Plug-in for Microsoft SharePoint
Allows QlikView content to be deployed via SharePoint
Individual QlikView objects can be embedded as Web Parts
To edit headline:Click on placeholder headline, delete it, and type in your own headline.
To edit text: Click on placeholder bulleted text, delete it, and type in your own bulleted list.

5. Benefits Customer can leverage what they already own
Easy to add or remove new QlikView content
Combine QlikView with other SharePoint Content on the same page
Fully interactive and ”Qlik-able”.
All Web Parts from the same QVW share the same selection state
Leverages built-in Microsoft security
One-stop shopping. Embed analytics in the SharePoint environment information workers already go to for content and collaboration.
To edit headline:Click on placeholder headline, delete it, and type in your own headline.
To edit text: Click on placeholder bulleted text, delete it, and type in your own bulleted list.

6. QlikView Business Discovery: An End User-Driven BI Approach
We call our approach Business Discovery.
It’s a whole new way of doing things for BI.
It focuses on the end user and the groups and organizations they exist in, rather than the top-down approach of traditional BI.
QlikView takes a bottoms-up approach that provides information and analysis precisely focused on the business problems end users are trying to solve.
It’s also about helping users share knowledge and analysis across individuals, groups and organizations.
Imagine the dramatic impact this could have if it was deployed across organizations throughout the world.
With QlikView, business users will typically initially work with IT to set up their data feeds.
From there, users are able to work with that data any way they want.
And they can be confident they are always working with the correct data.

7. QlikView Business Discovery: An End User-Driven BI Approach
We call our approach Business Discovery.
It’s a whole new way of doing things for BI.
It focuses on the end user and the groups and organizations they exist in, rather than the top-down approach of traditional BI.
QlikView takes a bottoms-up approach that provides information and analysis precisely focused on the business problems end users are trying to solve.
It’s also about helping users share knowledge and analysis across individuals, groups and organizations.
Imagine the dramatic impact this could have if it was deployed across organizations throughout the world.
With QlikView, business users will typically initially work with IT to set up their data feeds.
From there, users are able to work with that data any way they want.
And they can be confident they are always working with the correct data.

8. System Requirements System Requirements
QlikView Web Parts for Microsoft SharePoint
32-bit (x86) / 64-bit (x64)
Microsoft SharePoint
SharePoint Server 2007
SharePoint Server 2010
Windows SharePoint Services 3.0
SharePoint Foundation 2010 (WSS 4.0)
To insert headline:Click where indicated and start typing.
To add title to table: Highlight Table Title Placeholder. Delete. Type in your own title.
To populate info grid:Click in eachcell and start typing. There’s a text placeholder in the first cell to indicate
what text will look like. Simply delete placeholder text and type in your own copy in its place.
To add a row to the table:
Click a table cell in the row above or below where you want the new row to appear
Under Table Tools on the Layout Tab in the Rows and Columns group, do one of the following:
To add a row above the selected row clickInsert Above‭
To add a row below the selected row click Insert Below
To add multiple rows at once, select the number of rows you want to add and then clickInsert AboveorInsert Below
To add a column to the table:
Click a table cell in the column to the left or the right of where you want the new column to appear
To add a column to the left of the selected column clickInsert Left.
To add a column to the right the selected column click Insert Right.
To add multiple columns at once, select the number of columns you want to add and clickInsert LeftorInsert Right.
To resize Table:
On the table border, click and drag the sizing handle to make the table larger or smaller. A sizing handle is the cluster of dots that appears at the corners and sides of the table.To maintain the same ratio between the height and width of the table when you resize it, press and hold SHIFT while you drag to resize the table. ‬

9. Architectural Overview
Browser
IIS
SharePoint
SharePoint
HTTP(S)
QlikView Server
QvsNetRemoteWB.dll
QVS.exe
QlikView AJAX Content
QWWService.ashx
QVP 4747
HTTP(S)
QvsViewClientEx.ashx
To insert headline:Click where indicated and start typing.
To add picture: Right click on picture icon inside each box. Click insert.
To resize pictures larger than picture box: Click on image and right-click with mouse. Select “Size and Position.” Set all “Crop From” values to zero. Adjust height and width as desired by clicking “height” and “width” arrows. Click “Close.”
Left-click on image.
Use arrow keys to “nudge” image into desired position.
To add bulleted text: Click on placeholder bulleted text, delete it, and type in your own bulleted list.
The QvsNetRemoteWB.dll provides SharePoint integrated connectivity between the QlikView Server, and the client side QlikView AJAX content (exposed inside of SharePoint UI as WebParts).

10. Installation
QlikView Server must be reachable on the network and must be configured to serve AJAX over QVWS or IIS
When running installer, point to QvAjaxZfc directory and click the ‘Test URL’ button to confirm connectivity
Make sure to enable the ‘Use Proxy’ setting if you have SharePoint and the QvAjaxZfc folder on different computers. This is to avoid cross-site scripting issues
Entry is added web.config
<QlikViewWebParts>
<General>
<add key="QvAjaxZfcPath" value=" />
<add key="Proxy" value"" />
</General>
</QlikViewWebParts>
To insert headline:Click where indicated and start typing.
To add picture: Right click on picture icon inside each box. Click insert.
To resize pictures larger than picture box: Click on image and right-click with mouse. Select “Size and Position.” Set all “Crop From” values to zero. Adjust height and width as desired by clicking “height” and “width” arrows. Click “Close.”
Left-click on image.
Use arrow keys to “nudge” image into desired position.
To add bulleted text: Click on placeholder bulleted text, delete it, and type in your own bulleted list.

11. Add a QlikView Web Part to SharePoint
In SharePoint, Choose a Zone to add a Web Part
Choose ‘QlikView Object ‘
Click ‘Add’
To edit headline:Click on placeholder headline, delete it, and type in your own headline.
To edit text: Click on placeholder bulleted text, delete it, and type in your own bulleted list.

12. Add a QlikView Web Part to SharePoint
Document: The QlikView document from which content should be sourced
Type: Filter by the type of QlikView object to be sourced
Object: The Object ID of the QlikView object
To edit headline:Click on placeholder headline, delete it, and type in your own headline.
To edit text: Click on placeholder bulleted text, delete it, and type in your own bulleted list.

13. End Result

14. QlikView in Sharepoint - Internal

15. Licensing Must be a licensed QlikView user
To edit headline:Click on placeholder headline, delete it, and type in your own headline.
To edit text: Click on placeholder bulleted text, delete it, and type in your own bulleted list.

16. Licensing Server Licensing: QlikView Web Parts for SharePoint
LEF File will show “Web Parts: YES”
Client Licensing: Must be a licensed QlikView user
Nothing above and beyond the regular Named, Session, Document, or Usage CALs are required
To edit headline:Click on placeholder headline, delete it, and type in your own headline.
To edit text: Click on placeholder bulleted text, delete it, and type in your own bulleted list.

17. Security We need to worry about We need to decide
Multi-hop authentication issues
Cross-site scripting issues
We need to decide
Where does QvAjaxZfc reside?
Where does SharePoint IIS reside?
We don’t need to worry about QVS
AccessPoint / QVS interaction is handled by ticketing
To edit headline:Click on placeholder headline, delete it, and type in your own headline.
To edit text: Click on placeholder bulleted text, delete it, and type in your own bulleted list.

18. Multi-hop Authentication Issue with NTLM
NTLM is good for only 1 Hop
User is authenticated on both machines
NTLM
Client SharePoint /
QvAJAXZfc
User is authenticated on 1st and
2nd machines, anonymous on 3rd x
Thanks to Dan English for the security slides
NTLM
NTLM
Client SharePoint QvAJAXZfc 18

19. Two Machine Installs Fine Multi-Hop!!! Fine Machine #1 Machine #2 QVS
IIS
QvAjaxZFC
Fine
SharePoint Web Page
Machine #1
Machine #2
QVS
IIS
SharePoint Web Page
Multi-Hop!!!
QVWS
QvAjaxZFC
Machine #1
Machine #2
QVS
QVWS
QvAjaxZFC
Fine
IIS
SharePoint Web Page

20. Cross-Site Scripting Issues
Content from one server generally may not call scripts that are located on another server.
This can happen if the QvAjaxZfc virtual directory is not located on the same web server as the SharePoint Web Page(s).
To edit headline:Click on placeholder headline, delete it, and type in your own headline.
To edit text: Click on placeholder bulleted text, delete it, and type in your own bulleted list.

21. Two Machine Installs Fine Cross Site!!! Cross Site!!! Machine #1
QVS
IIS
QvAjaxZFC
Fine
Workbench Web Page
Machine #1
Machine #2
QVS
IIS
Workbench Web Page
Cross Site!!!
QVWS
QvAjaxZFC
Machine #1
Machine #2
QVS
QVWS
QvAjaxZFC
Cross Site!!!
IIS
Workbench Web Page

22. How to Address these Security Challenges
Multi-hop Authentication Issue with NTLM
Architect deployment to avoid the problem
Use custom ticket exchange or HTTP Header methods (i.e. avoid NTLM)
Configure Kerberos
Cross-Site Scripting Issues
Use Proxy Page (enabled during installation)
To edit headline:Click on placeholder headline, delete it, and type in your own headline.
To edit text: Click on placeholder bulleted text, delete it, and type in your own bulleted list.
If possible, choose an architecture that avoids these security issues!

23. Thank You!