1. Technology And Engineering
GRAPHIC PRODUCTION
Varnising
Sumber buku : Mengerjakan pemvernisan
Penyusun : Agus Nugroho Editor : Endro Santoso HS

2. LEARNING OBJECTIVES
After learning of this study, students are expected to be able to:
Understand and know the UV varnish tools and materials
Use the UV varnish machine according to its function
Use the UV varnish material
Do the varnishing
Answer the formative test
Teknologi dan Rekayasa

3. Understanding
Coating process that similar with laminating, but using a chemical coating material that has the different product result
Teknologi dan Rekayasa

4. UV Varnish Machine
Teknologi dan Rekayasa

5. Prepare the tools and materials Clean the varnish roller
Make The Working Steps
Prepare the tools and materials
Clean the varnish roller
Fill the varnish tank container
Stack and arrange the paper that will be varnished in the inlet table.
Teknologi dan Rekayasa

6. Adjust the roller pressure Do the trial printing
Adjust the income unit
Adjust the roller pressure
Do the trial printing
Run the varnishing process
Teknologi dan Rekayasa

7. Prepare the varnishing working place
Prepare the palette board according to its requirement
Prepare the varnish, adhesive material and the retailer
Teknologi dan Rekayasa

8. Prepare the template for specific part varnishing
Adjust the engraving and transferor liquid
Prepare the dryer and the receiver unit
Teknologi dan Rekayasa

9. Prepare the varnishing example according to the work criteria
Check the neatness and accuracy of the varnish example result
Run the mass varnishing
Teknologi dan Rekayasa

10. Save the varnishing result in the prepared place
Turn the engine off according to the procedure once the process is finished
Save the varnishing result in the prepared place
Teknologi dan Rekayasa

11. Perform varnish engine maintenance
Prepare the working equipment and the lubricant
Check (repair if there is a damage) the lubrication system
Examine/check all parts carefully
Teknologi dan Rekayasa

12. Clean all parts from dust and dirt
Prepare and check the working equipment and easily worn parts
Turn on the machine
Teknologi dan Rekayasa

13. Replace and note the broken machine parts Do the varnish test
Check the accuracy, quality, and neatness of the varnish holder.
Teknologi dan Rekayasa