Presentation is loading. Please wait.

Presentation is loading. Please wait.

Advanced Configuration

Similar presentations


Presentation on theme: "Advanced Configuration"— Presentation transcript:

1 Advanced Configuration
SECTION 6 - Advanced Configuration Ethernet Wired LAN 195Eg

2 RS-232 Programming Port 38,400,N,8,1 RJ-45 Connector (RS-232)
Terminal Window (HyperTerminal, ESTeem Utility, Putty, TerrTerm, etc) Serial Port Access admin Default Username and Password Set IP Address for Web Interface View Device and System Log Files Ping Host device from Modem

3 Advanced Menu Invalid Input will Kill Operation
Requests in Manual or from Customer Support Only Experienced Users Direct Access to All Modem Variables Modem_ID Diversity Antenna Configuration Maximum Distance Settings Specific Settings in Manual

4 195E Antenna Selection **195Ed can Transmit and Receive Both Ports
Antenna in Port A Cap over Port B Single External Antenna CurrentRXAntenna Value of 0 = Both Antenna Value of 1 = Port A Value of 2 = Port B Antenna Selection in Advanced WLAN_0 **195Ed can Transmit and Receive Both Ports

5 **195Ed can Transmit and Receive Both Ports
Antenna in Port A Cap over Port B Single External Antenna CurrentRXAntenna Value of 0 = Both Antenna Value of 1 = Port A Value of 2 = Port B Antenna Selection in Advanced WLAN_0 **195Ed can Transmit and Receive Both Ports

6 Long Distance Links Very High Gain Antennas < 21dBi
Distances Greater Than Mbps Factory Default Set to 10 Miles Model 195E with Dish/Panel Antennas Adjustment of Timing Value Set Maximum Range in Advanced Configuration Distance Set in Miles – set to per link distance not round trip Distances Over 10 Miles

7 Long Distance Links Very High Gain Antennas < 21dBi
Distances Greater Than Mbps Factory Default Set to 10 Miles Model 195E with Dish/Panel Antennas Adjustment of Timing Value Set Maximum Range in Advanced Configuration Distance Set in Miles – set to per link distance not round trip Distances Over 10 Miles

8 Global Settings Modem ID
Identify each modem for own purposes (i.e Main street) Manual set or use ENC Remote Syslog Configuration Linux based Syslog or Windows available downloads Set System Time Real time clock Time server configuration

9 Global Settings

10 Wireless LAN Settings Antenna Selection Dual Diversity
Max Distance Settings Operating Rates RF Datarate Output Power Levels Enable Transmitter SWR measurement 10 second transmit

11 Wireless LAN Settings

12 Wireless LAN Settings

13 Routes and Bridge Variables
Static Route Table Configure when network router is unavailable Bridge Variables Spanning tree enabled/disabled Root Bridge Configuration of multiple root bridges Redundant root bridges Redundant master locations

14 Bridge Variables

15 Saving and Restoring Configuration
Saving Configuration Select Backup from Main Menu Save to FTP Site Save to File on Computer Restoring Configuration Restore Factory Defaults Restore Last Configuration Removes Any uncommitted Changes made to configuration Restore From File Restores a backup configuration file from FTP or Local File

16 Saving and Restoring Configuration
Restore Factory Defaults Restore Last Configuration Removes Any uncommitted Changes made to configuration Restore From File Restores a backup configuration file from FTP or Local File

17 Updating Firmware Updates OS to include bug fixes and new features
Images files are specific to model Firmware Updates Local or Internet FTP Site File Saved on Computer Select Software Update Main Menu Select File for Update Can be done over the air or local

18 Updating Firmware

19 Updating Firmware

20 195Es Repeater Frequency Hopping Spread Spectrum
Maximum of Three Repeater Hops Unique Feature to ESTeem – requires additional Timing configuration Timing Master WLAN MAC Address Upstream Timing Master Program WLAN MAC of upstream tier Repeater Peers Same as other 195E No alternate paths

21 195Es Repeater Diagram Timing Master Tier 1 Repeater Tier 1 Repeater
Tier 2 Repeaters Tier 3 Repeater

22 195Es Configuration Timing Master Repeater Tier 1 Repeater Tier 2
Timing Master = Blank Entry or 00:00:00:00:00:00 Repeater Tier 1= Enter Timing Master WLAN MAC Repeater Tier 2 = Enter Upstream Repeater Tier 1 Repeater Tier 3 = Enter Upstream Repeater Tier 2


Download ppt "Advanced Configuration"

Similar presentations


Ads by Google