1. White-Star

2. Features & Benefits Low Odor Strong Adhesion UV Protection
130 g/l in VOC Content
Strong Adhesion
1000 lbs. of Tensile Strength is Experienced When Bonding to Modified Membranes
UV Protection
Protects Against UV Exposure and Premature Aging
Fire Resistant/Fire Rating
Meets ASTM E 108 Class A at 2:12 Slope
Fast Curing
Fully Cures in 24 Hours
FM Approvals
Approved Over All Garland Hot Asphalt, Weatherking, Green-Lock and Torch Systems As A Flood Coat
Durability
Improves Impact Resistance of Any Roof System

3. Application Rates
Spray or Roll 2 Gallons Per 100 Square Feet (32 Wet Mils) of White-Star
Then Broadcast White Aggregate at 200 lbs. Per 100 Square Feet Into the Wet Adhesive (.81 l/m2)

4. White-Star Top Coated Gravel
West Coast Requirement for Title 24 Approval!
Spray or Roll 1 Gallon Per 100 Square Feet (16 Wet Mils) of White-Star
Then Broadcast 3/8” White Aggregate at 200 lbs. or Roofing Mineral at 28 lbs. --Per 100 Square Feet Into the Wet Adhesive
Wait 24 Hours to Cure
Finally Spray or Roll a Second Layer at 1 Gallon Per 100 Square Feet (16 Wet Mils) Covering the Aggregate

5. White-Star Layers
All-Knight Primer is Required Over All New Bur/Modified Asphalt Systems at ½ -1 Gallon Per Square Prior to Application of the White Star
Then Apply White-Star with the Desired Application Technique

6. Temperature Difference

8. Summary
White-Star is a Single-Component Aliphatic Polyurea, Liquid Adhesive that when Combined with White Gravel Will Maintain, Restore and Upgrade Smooth or Mineral Roof Systems
It Provides a White ENERGY STAR, Title 24, LEED, and CRRC Rated, Reflective Surface With All the Benefits of a Graveled Roof