Download presentation
Presentation is loading. Please wait.
1
Make a connection and relationship of wood
Plane The Wood
2
Learning Objectives: Students can explain the procedures that governed the selection of wood and applied according to company requirements. Students can choose the appropriate timber based on its quality procedures. Students can harvest timber properly. Teknik Konstruksi Kayu
3
Kinds of Plane Various kinds of crabs are often used is: Jack plane
smooth plane jointer plane rabbet plane spoke shave Teknik Konstruksi Kayu
4
Section crab Crab house Crab eyes Baji crab Teknik Konstruksi Kayu
5
Setting Crab PROCESS Teknik Konstruksi Kayu
6
Step work plane Preparing the work piece in the size of a / net should consider steps - steps that work properly and systematically, such as the following: The first plane side of the board width (face 1) first to clean the desired size, then give a sign that the harvest has been completed properly. Both sides reap the thick planks (face 2) until the desired size. Teknik Konstruksi Kayu
7
Step harvest work (continued)
Third reaping results signaled that the surface of a wide board (face 1) have been perpendicular to the surface of thick boards (face 2). The fourth plane thick side boards (face 3). The fifth plane wide boards side (face 4). The sixth cut the length of the board according secant existing Teknik Konstruksi Kayu
8
Step harvest work (continued)
First Reap the broad side Second Thick side of the plane Third Tick perpendicular Fourth Reap the broad side Until the desired size Fifth Thick side of the plane Until the desired size Sixth Cut length Teknik Konstruksi Kayu
9
Example Teknologi dan Rekayasa
10
Thank You Teknologi dan Rekayasa
Similar presentations
© 2025 SlidePlayer.com. Inc.
All rights reserved.