1. MULTI-FUEL FIRE PLACE INSERT / STAND ALONE PELLET STOVE
PHOENIX F25i
MULTI-FUEL FIRE PLACE INSERT / STAND ALONE PELLET STOVE

2. SERAPH PHOENIX: OUR DESIGN TEMPLATE
FIRE PLACE INSERT OR STAND ALONE UNIT
SIZE: HEIGHT 21”, WIDTH 28”,DEEP 26” APPROX 250# IN WGHT
HOPPER SIZE 80 LB CAPACITY
THERMOSTAT CONTROLLED WITH AUTO IGNITE
BURNS FOR A WEEK WITHOUT SHUTTING DOWN
EASY TO CLEAN AND TO MAINTAIN
EFFICIENT, SAFE & EASY TO OPERATE
QUIET OPERATION

3. DIRECT DRIVE AND EASY TO REMOVE AUGERING SYSTEM
FIREPOT AUGER AND ASH PANS ARE MADE OF 304 SS
FIRE POT DESIGN AUGERS ASH TO THE OUTSIDE ASH PANS,
ALLOWS FOR DAYS OF OPERATION WITH OUT ASH BUILD UP.
DESIGN CHALLENGES: WITH LIMITATIONS ON THE HEIGHT AND TO ACHIEVE A WIDE FLAME, WE HAVE A WIDE AND SHALLOW FIREPOT, NOT THE MOST FAVORABLE CONDITIONS FOR COMBUSTION EFFICIENCY.

4. EXHAUST
OUT
ALSO WITH THE AIR PRESSURE SENSOR WILL INDICATE CLEANING NEEDED.
EXHAUST INLET
OUR DESIGN: WITH THE USE OF ASH REDUCTION FILTER BASKETS*, OUR GOAL IS TO REDUCE THE FLY ASH IN THE EXHAUST PATH AND FLUE.
WITH MINIMAL CUSTOMER CLEANINGS TO MAINTAIN PEAK BURNING EFFICIENCY AND TO MINIMIZE THE G/HR WE FEEL THIS IS AN EXCELLENT WAY THE CONSUMERS WILL BE ABLE TO CREATE A WONDERFUL BURNING ENVIRONMENT WHILE MINIMIZING ASH IN THE AIR OUTSIDE.

5. CONVECTION BLOWER: 265 CFM
LARGE HEAT CONVECTION SURFACE & TUBE SCRAPER
PRIMARY AND SECONDARY HEAT EXCHANGER
REUSABLE EASY CLEAN FILTERS / CONVECTION AIR.
MIXTURE OF STAINLESS & STEEL PARTS FOR LONGEVITY OF USE IN YRS.
Burning efficiency estimations:
Mid 70’s we will continue to tweak in air to fuel ratios & fire pot designs.
We believe we will be able to achieve g/ hr

6. PHOENIX CAN BE INSTALLED AS A FIREPLACE INSERT OR USED AS A STAND ALONE UNIT

7. In 2009 Seraph released the Genesis Series stoves G108 & G106X, certified to CAN/CSA B & EPA Method 5G
GENESIS 108 MULTI-FUEL 45,000 BTU’S
2.1 GRAMS 80 LB HOPPER
LHV 83.2% HHV 77.2%
GENESIS 106X MULTI-FUEL 40,000 BTU’S
2.1GRAMS 120 LB HOPPER
LHV 83.2% HHV 77.2%