1. Assembly Guide

2. Tool : electric soldering iron ,350℃
solder the Front camera, the rear camera and flashlight, LCD, Volume key;
Tool : electric soldering iron ,350℃

3. Paste a MALAR

4. Paste a MALAR

5. Paste conductive foam

6. Assembly the TP

7. Install the receiver and the LCD into the housing-A

8. Make sure the LCD in the fixed position

9. Assembly the Light-sensitive sensor shelf

10. Assembly the PCBA (please take care of the FPC of TP )

11. Screw of PCBA

12. Assembly the FPC of TP :
a, unlock the TP connector (up);b, insert the FPC of TP; c, lock the TP connector (down)

13. Assembly the volume key (FPC)

14. Assembly the MIC

15. Paste a conductive fabric to cover the MIC line

16. Assembly MIC

17. Paste a conductive fabric on the grounding of LCD and PCBA

19. Paste the antenna on the Housing -B

20. Install the SPK

21. Assembly the housing A, housing B

22. Assembly the housing A, housing B;(please take care of the volume key )

23. Screw of housing