1. 5708 Models and Peripherals
Product Introduction
5708 Models and Peripherals

2. Agenda 5708 Various Models Multi Scanner System
3DVision / 3DMultiVision
3D Solids Scanner Locator
3DLinkPro
Accessories

3. 5708 Basic Model 5708L 5708V 5708S Feature Level Volume
Volume, opt visualization, opt system
Output
Average Level/Distance
+ Volume
Min/Max Level/Distance
+ 3D image
Multi Scanner system
Recommendations
Single scanner in any vessel
Single scanner
Diameter: <5m, <12m
No limitation
LCD
Local Configuration
Viewing
High Temp
Opt
Upgraded
Yes
Visualization

4. 5708L
Determines the average level of the stored contents and average distance from the scanner to the surface of the material
Configuration from LCD and keypad
Designed to beat all other level devices in the market

5. 5708V Highly accurate readings of level and volume
Provides minimum and maximum level/distance measurements
Appropriate for vessels up to 16.5ft (5m) or 40 ft (12 m) in diameter
Wide beam angle

6. 5708S Highly accurate readings of level and volume
Provides minimum and maximum level/distance measurements
No vessel width limitation due to option of mounting two or more devices in the same vessel
Generates a 3D representation of the stored contents on a remote computer

7. Multi Scanner System
5708S designed to work as a single scanner in a vessel or in Multi Scanner mode
No limitation to the number of scanners
Covering very large areas
Information from all devices combined in a Controller (dedicated industrialized computer)
Acoustic signal transmission synchronized
Requires constant connection to the 3DVision SW

8. Multi Scanner System – cont’
4-20mA output in all scanners is in synch to output the same volumetric value
Configuration of Multi Scanner vessel is as simple as configuring single scanner using the 3DVision Configuration Wizard
All scanners must be connected in the same RS-485 Daisy-Chain

9. 3DVision / 3DMultiVision
2 Modes of operation:
Device Configuration (default)
Advanced Connection
Advanced Multi-Server– Multi-Client application, based on MS .NET Framework 3.5 SP1
Easy-to-use graphic interface
Provides immediate view of all vessels
Hierarchy organized: Sites – Vessels – Scanners

10. 3DVision – cont’ Synchronizes Multi scanners system
3DVision limited to single vessel (no limitation on amount of scanners)
3DMultiVision has no limitations - Licensed
Unlimited number of clients connected to single server
Report generation
Compatible with Windows XP and 7

11. 3D Solids Scanner Locator
Automatic calculation of optimal location
Solution based on the number of scanners: 1-3
Solution provides maximal potential error
Graphical interface to show vessel’s details

12. 3D LinkPro Designed to work with the 3D Solids Scanner
Provides remote connection to the device(s)
Requires local SIM card supporting GPRS and SMS
Fully integrated into the 3DVision to allow smooth operation
No function restriction
Modem Wizard application to test the SIM card and LinkPro in current installation

13. Accessories Flanges – various sizes
Neck Extension – 12” (30cm) and 20” (50cm)
10 and 20 degrees angle adapter
Cable extender – 12” (30cm) and 20” (50cm)
Hi Temperature (180°C / 356°F) Antenna
Mounting Assembly