1. 1900 Projectors Instructions

2. AMX Controller
If the screen on the controller is blank, touch the screen.

3. After touching the screen, this image will show up
After touching the screen, this image will show up. Touch the screen again.

4. Then this image will display on the screen
Then this image will display on the screen. Select a source for either left screen or right screen or both screens.(PC, Laptop, Doc Cam, Video, DVD, or VCR). Make sure the source you want to display has been powered on.

5. Additional actions
After the source has been selected, the projector will automatically power on, and the projector screen will automatically come down.

6. Source selection
If the source selected is DVD or VCR, touch DVD/VCR Control to access the controls for DVD or VCR. This image will be displayed.

7. Shut down
To shut system down, press exit. After exit has been pressed, the system will shut down in 10 seconds (projectors shut down and projector screens go up).

8. Function Of Controls Proj On: turns on projector only
Proj Off: turns off projector only
Mute: mutes audio output
Vol - : decreases audio level
Vol + : increases audio level
Screen Up: raises a screen
Screen Down: lowers a screen
Back: returns to previous screen
Source: allows access to sources
DVD/VCR Control: allows access to DVD or VCR controls
Exit: shuts the system down