Presentation is loading. Please wait.

Presentation is loading. Please wait.

Vanessa GOMES, Marcella SAADE, Bruno LIMA, Maristela SILVA

Published byCharity Shanna Bradford Modified over 6 years ago

Similar presentations

Presentation on theme: "Vanessa GOMES, Marcella SAADE, Bruno LIMA, Maristela SILVA"— Presentation transcript:

1 Exploring feasibility thresholds for neutralizing lifecycle energy of a nZEB case study
Vanessa GOMES, Marcella SAADE, Bruno LIMA, Maristela SILVA Department of Architecture and Construction, University of Campinas,

2 Introduction Net zero energy/emissions: only operation Embodied energy
Energy input – building and components – not accounted for CO2eq Embodied energy Operational energy efficiency Embodied – product stage, EOL

3 Introduction - Transport to site = big grey area
- Prediction of energy use - standard site operations = hampered by lack of data on construction equipment and activities, on energy savings - optimized site management operations - Service life of components - calculations of maintenance/repair/replacement/re-furbishment as part of the use stage - Limited data on energy used by demolition, reuse and recycling processes at EOL

4 Construction process stage
Purpose and method Low-energy strategies, integrated design process, resource use optimization, onsite renewable energy technologies and storm water management, low energy refrigerating system, online resource use and indoor monitoring. Production cycles Building LC CED PV systems A 1-3 Product stage A 4-5 Construction process stage B 1-7 Use stage C 1-4 End-of-Life D Next product system Raw material supply Transport to manufacturer Manufacturing Transport to building site Installation into building Use Maintenance Repair Replacement Refurbishment Operational energy use Operational water use Deconstruction/demolition Transport to EoL Waste processing Disposal Reuse, recovery or recycling potential X LivingLab - UNICAMP

5 Purpose and method Building lifecycle stage
Renewable energy generation targets Operation (net zero, NZ) statuses The PV system must produce enough energy to compensate Operational Eletricity (NRen) NZ(Emission) B The building annual non-renewable operational energy consumption Operational Eletricity (Total) NZ(E)B The total building annual operational energy consumption CED of Operational Eletricity (NRen) NZ(CEDNRen) Building The non-renewable portion of the cumulative energy demand of Brazilian mix, grid-supplied operational electricity CED of Operational Eletricity (Total) NZ(CED) Building The total cumulative energy demand of Brazilian mix, grid-supplied operational electricity

6 Purpose and method Building lifecycle stage
Renewable energy generation targets Beyond Operation Plus statuses (+ CEDNRenPROD) The PV system must produce enough energy to compensate Operational Eletricity (NRen) + CED (NRen) of Building Products NZ(Emission)EB Plus The building annual non-renewable operational energy consumption plus the non-renewable portion of the cumulative energy demand of building products Operational Eletricity (Total) + CED (NRen) of Building Products NZ(E)B Plus The total building annual operational energy consumption plus the non-renewable portion of the cumulative energy demand of building products CED of Operational Eletricity (NRen) + CED (NRen) of Building Products NZ(CEDNRen)B Plus The non-renewable portion of the cumulative energy demand of Brazilian mix, grid-supplied operational electricity plus the non-renewable portion of the cumulative energy demand of building products CED of Operational Eletricity (Total) + CED (NRen) of Building Products NZ(CED)B Plus The total cumulative energy demand of Brazilian mix, grid-supplied operational electricity plus the non-renewable portion of the cumulative energy demand of building products

7 Purpose and method Building lifecycle stage
Renewable energy generation targets Lifecycle statuses The PV system must produce enough energy to compensate… Lifecycle CED (NRen) LCNZ(CEDNRen) The non-renewable cumulative energy demand over the whole building’s lifecycle Lifecycle CED (Total) LCNZ(CED) The total cumulative energy demand over the whole building’s lifecycle

8 Cumulative Energy Demand
Purpose and method Cumulative Energy Demand Contributions from items/activities considered, in respective F.U. Construction equipment fuel use :high-rise building in Hong Kong Extraction/manufacturing – SimaPro 7.3 – Ecoinvent, ELCD, US LCI, Industry Data Transported mass, travel distance and type of modal and fuel used - Ecoinvent, ELCD – correct.: wastage factors Contributions from maintenance/repair/replacement and operational use of energy EOL1: 90% recovery rate (0% reuse | 76% recycling | 23% landfilling), crushing of concrete, recycling of metals and incineration of 90% of the wooden material, and landfilling the remaining CDW Contributions from demolition/dismantling equipment energy use and from CDW transport to end of life treatment facilities EOL2: 90% recovery rate (19% reuse | 60% recycling | 20% landfilling), 60% reuse of steel frame; recycling of metals, crushing of 90% of concrete, gypsum and uncoated glass; incineration of 90% of the wooden material, and landfilling the remaining CDW

9 Purpose and method Four crystalline silicon (single-Si, multi-Si) and thin film (amorphous-Si and CIGS) PV technology generations were simulated. Discounted generation losses (orientation and exposure varied for facade- and rooftop-mounted application) Degradation 0.5% per year - generation loss through time (25-year panel service life) - desired performance maintained over whole period of study

10 Product Stage (Modules A1, A3) CEDRen (MJ) CEDNRen (MJ) Total CED (MJ)
Raw material supply (Module A1) and manufacturing (Module A3) 3,949,090.61 14,900,974.67 18,850,065.28 Construction Process Stage (Modules A2-A5) Transportation to manufacturing gates within supply chain (Module A2*) and to construction site gate (Module A4) 13,102.47 938,082.67 951,185.13 Construction – installation (Module A5) Material wastage during construction 99,955.38 606,206.21 706,161.59 CDW treatment ( tones), transported 25 km (municipal facility) 65.35 5,036.75 5,102.10 Earth (547.2 tones), transported 25 km (municipal facility) 393.81 30,354.46 Earth removal equipment (547.2 tones) 129.04 44,317.88 44,446.92 Construction equipment 162,626.33 337,904.41 500,530.74

11 Use stage (Modules B2-B6) CEDRen (MJ) CEDNRen (MJ) Total CED (MJ)
Material replaced in Maintenance/Repair/Replacement/Refurbishment (334.52 tones) 1,552,653.13 11,445,458.00 12,998,111.14 Operational use of (electric) energy (Module B6) (111,157.20 MJelec/yr) 6,753,290.10 3,081,714.16 9,835,004.26 End of life (EOL) stage (Modules C1-C2) EOL Scenario %-efficient recovery (concrete and metals) demolition (1,763,52 tones) (76% recycled/23% landfilled) 387.11 132, 133,340.75 CDW (1, tones) transported to various destinations 944.14 72,773.35 73,717.50 LC Total for EOL Scenario 1 12,532,637.46 31,595,776.20 44,128,413.66 EOL Scenario 2 – 90%-recovery efficient selective dismantling (19%reuse/60%recycled, including PV panels/20%landfilled) 1,161.32 398,860.93 400,022.25 972.43 74,953.78 75,926.21 LC Total for EOL Scenario 2 12,533,052.86 31,730,910.27 44,263,963.13

12 Results 16% 43% 34% CED Product stage Total CED 52% 41% 7% <5%
Façade Raw mat. supply and manufacturing (A1-A3) PV system plus BOS Construction process stage (A2-A4-A5) Partitions Use (B2 to B6) Structure End of Life (C1-C2) 7% 16% 43% <5% 34% CED Product stage Total CED 52% 41% <1%

13 Effective generation area (m2)
Scenarios System power (kWp) Effective generation area (m2) Net Zero scenarios  1. Operational electricity (NRen) [NZ(Emission)EB] 3.5 20.59 2. CED Operational Eletricity (NRen) [NZ(CEDNRen)B] 12.61 74.14 3. Operational electricity (total) [NZ(E)B] 22.74 133.72 4. CED Operational Eletricity (total) [NZ(CED)B] 40.24 236.62 Plus scenarios   1a. Operational electricity (NRen) + CED (NRen) PROD [NZ(Emission)EB Plus] 64.47 379.10 2a. CED Operational Eletricity (NRen) + CED (NRen) PROD [NZ(CEDNRen)B Plus] 73.58 432.65 3a. Operational electricity total + CED (NRen) PROD [NZ(E)B Plus] 83.71 492.22 4a. CED Eletricity Operational total + CED (NRen) PROD [NZ(CED)B Plus] 101.21 595.13 Lifecycle scenarios   5. LC CED (NRen) [LCNZ(CEDNRen)] 129.28 760.17 5a. LC CED (total) [LCNZ(CED)] 180.56

14 Conclusions Ubiquitous PV use CED: bar, but PV area demands
Actual energy involved in delivering, using and dismantling buildings: better informs decision-making by building professionals, construction and transportation/logistic services and policy makers Onsite generation capacity was mostly limited by the available surface Powerful message for passersby, tuned with building’s mission Ubiquitous PV use Ground concepts, showed they are achievable, and showed major gaps to turn net- and lifecycle-zero goals into mainstream practice Cost: most restrictive aspect regarding aggressive neutralization of energy and GWP goals

15 THANK YOU! Vanessa GOMES, Marcella SAADE, Bruno LIMA, Maristela SILVA
Department of Architecture and Construction, University of Campinas,

Download ppt "Vanessa GOMES, Marcella SAADE, Bruno LIMA, Maristela SILVA"

Similar presentations

Sustainable Construction

Sustainable Construction
Eco Design 1. ECO 2011 AR Eco-Design ITD Definition 80% cut in NOx emissions Halving perceived aircraft noise 50% cut in CO2 emissions per pass-Km by.

Eco Design 1. ECO 2011 AR Eco-Design ITD Definition 80% cut in NOx emissions Halving perceived aircraft noise 50% cut in CO2 emissions per pass-Km by.
Annual Conference 2008 Future Challenges for the Waste Management Industry Waste Framework Directive - Impact on the European Waste Management Industry.

Annual Conference 2008 Future Challenges for the Waste Management Industry Waste Framework Directive - Impact on the European Waste Management Industry.
Environmental life cycle assessment. Why Sustainable Construction?  Social progress, which recognises the needs of everyone  Effective protection of.

Environmental life cycle assessment. Why Sustainable Construction?  Social progress, which recognises the needs of everyone  Effective protection of.
Green Rating for Integrated Habitat Assessment (GRIHA) Ar. Partha Ranjan Das.

Green Rating for Integrated Habitat Assessment (GRIHA) Ar. Partha Ranjan Das.
Waste The U.S. produces 11 billion tons of waste per year. Industrial waste –about 400 million metric tons per year in the U.S. Municipal Waste- A combination.

Waste The U.S. produces 11 billion tons of waste per year. Industrial waste –about 400 million metric tons per year in the U.S. Municipal Waste- A combination.
2.2 The NZEB case study – Consists of an office building built in Lisbon (2006), which is an NZEB prototype [7]. It successfully combines passive design.

2.2 The NZEB case study – Consists of an office building built in Lisbon (2006), which is an NZEB prototype [7]. It successfully combines passive design.
Solid Waste are useless, unwanted or hazardous materials resulting from human activities Rubbish that may decompose e.g. food materials Non-decomposable.

Solid Waste are useless, unwanted or hazardous materials resulting from human activities Rubbish that may decompose e.g. food materials Non-decomposable.
Beck Energy Group P o w e r i n g t h e F u t u r e.

Beck Energy Group P o w e r i n g t h e F u t u r e.
Future Energy Scenarios 2015 Introduction Roisin Quinn Head, Energy Strategy and Policy.

Future Energy Scenarios 2015 Introduction Roisin Quinn Head, Energy Strategy and Policy.
EFFIC (Equipment for Free Form Interconnection of CIGS) Jan Wemmenhove, PM Smit Ovens Sunday 2014 event Nov. 19 th, 2014.

EFFIC (Equipment for Free Form Interconnection of CIGS) Jan Wemmenhove, PM Smit Ovens Sunday 2014 event Nov. 19 th, 2014.
Concept of Energy Efficiency. Buildings, as they are designed and used, contribute to serious environmental problems because of excessive consumption.

Concept of Energy Efficiency. Buildings, as they are designed and used, contribute to serious environmental problems because of excessive consumption.
Materials and Resources. 1.Materials and Resources Goals LEED NC Prerequisites & Credits Intent & Strategies LEED EBOM Credits 2.Indoor Environmental.

Materials and Resources. 1.Materials and Resources Goals LEED NC Prerequisites & Credits Intent & Strategies LEED EBOM Credits 2.Indoor Environmental.
Lamma Power Station Solar Power System. 2 Content Project Background Site Selection Amorphous Silicon Thin Film Photovoltaic System Environmental Benefits.

Lamma Power Station Solar Power System. 2 Content Project Background Site Selection Amorphous Silicon Thin Film Photovoltaic System Environmental Benefits.
Clara María Mollá Muñoz. PFG_T31 17-July,2013. 1. Introduction. Sustainable architecture The strategies are focused on energy efficiency. Reduce environmental.

Clara María Mollá Muñoz. PFG_T31 17-July, Introduction. Sustainable architecture The strategies are focused on energy efficiency. Reduce environmental.
GILLES PERROT Total and the Photovoltaic Solar Market KAZENERGY 2011 - ASTANA.

GILLES PERROT Total and the Photovoltaic Solar Market KAZENERGY ASTANA.
Overview of Energy Efficiency & Renewable Energy (Draft version) Prepared by Natural Resources Canada in association with Indian and Northern Affairs Canada.

Overview of Energy Efficiency & Renewable Energy (Draft version) Prepared by Natural Resources Canada in association with Indian and Northern Affairs Canada.
ENV-2D02 Energy Conservation 2006 Energy Analysis & Lifecycle Assessment.

ENV-2D02 Energy Conservation 2006 Energy Analysis & Lifecycle Assessment.
Achieving Independent Net Zero Energy Through Building Technologies Presented by: Michael Hendrix, Atkins North America.

Achieving Independent Net Zero Energy Through Building Technologies Presented by: Michael Hendrix, Atkins North America.
Incentives and Tax Credits Federal, state, and private incentives and tax credits exist to encourage the use of renewable energies. Federal, state, and.

Incentives and Tax Credits Federal, state, and private incentives and tax credits exist to encourage the use of renewable energies. Federal, state, and.

Similar presentations

Ads by Google