1. MyQ Home Bridge Wi-Fi setup and transfer devices for Wi-Fi GDO

2. To setup the MyQ Home Bridge to your home Wi-Fi, you must have the following: Router with 2.4 GHz Wi-Fi Broadband Internet Connection The Wi-Fi network's name and its associated security key/password (if applicable) The blue LED on the MyQ Home Bridge must be blinking. If the blue LED is not blinking, unplug the power supply and plug back in (the blue LED will blink).
Connect your Apple device to your 2.4 GHz Wi-Fi network
Log into the MyQ app

3. 3. Tap the + sign.
Note: LED light on Home Bridge must be flashing.
4. Locate and press MyQ-nnn under Discoverable Accessories.
5. Press Add Home or choose Home
6. Choose a name and press Add Home and then Next.

4. 9. Scan the Apple Accessory code on the back of the bridge with the mobile device’s camera.
Wait for the bridge to pair to the network. This may take a few minutes.
7. Press the MyQ-NNN
8. Press Allow to connect to your Wi-Fi network.
10. Press Next

5. 14. Erase the Wi-Fi settings on the Wi-Fi GDO, by pressing and holding the black adjustment button down until you hear 3 beeps.
11. Press Done.
12. Click Yes to transfer devices
13. Select the device to transfer.

6. 15. Locate the learn button on the garage door opener.
16. Press and release the learn button.
17. Name your device/accessory and click Next.
18. Click Ok of if more devices need to be added, go to step #13.

7. 19. Click Done.
20. The devices are now showing on the MyQ Home Bridge.