1. 6 CH 5A LED Dimmer
HDL-MDLED

2. Description
HDL-MDLED CH 5A Intelligent LED Dimming Module, it can be used to control the LED light which has constant voltage. It has 6 output channel, each channel has a bypass button for manual control. Scene and sequence functions are available.
5/9/2018

3. Wiring &Functions Wiring: Functions:
HDL Buspro
DC12-30V
Functions:
Short circuit and over current protection are available
Max current in each channel: 5A
PWM Constant Voltage Output
Support HDL Buspro online upgrading
Note: Take the connection of channel 3,4 and 6 as an example

4. Configuration Subnet and Device ID of HDL-MLED0605.432
Remark for HDL-MLED module

5. Area
Current area
Channels of current area

6. Area
Area remark
Save

7. Area
Take the connection of RGB strip as example, channel 3 connect to R, 4 connect to G, 6 connect to B. Here assign channel 3,4,6 in one area.

8. Area 2.Select Area 3.Select channel
4.Assign the selected channels to current area
1.Create Area
5.Save

9. Area Channels waiting to be assigned. Channels in current area
Create new area

10. Channel Channel remark
Make sure that Lower limit ≤ Higher limit ≤ Max limit, setting range: 0% - 100%
Use for test the load

11. Scene Select Area Fill in the range of scene number to be involved
Scene remark

12. Scene Mix the levels of channels to create scene
Running time: the transition time till the scene reaches the preset brightness.(Fade time)

13. Sequence Add: Add sequence in current area
Free: Inactivate sequence space in current area, after inactivate, this sequence cannot be used;
Restore: Restore inactivated sequence in current area; after restore, this sequence can be used.
Delete: Delete the sequence in current area.(need to delete start from the outmost in sequence and without interval)

14. Sequence
Set sequence mode
Step (scene) Qty
Set sequence running time

15. Sequence
Assign a scene to each step
Set running time of each step