1. CMD in the Steel Industry

2. Steel Industry TYPICAL APPLICATIONS Sinter plant Sinter breaker
Sinter machine
Blast Furnace
Torpedo cars
Dryer
Continuous casting
Laddle crane
Steel converters
Hot Strip Mills
Pinion stands
Stand reducers
Screw down reducers
Gear couplings
Shear drives
Coilers / uncoilers

3. Steel Industry SINTER PLANT Sinter breaker and sinter machine
BOGIFLEX drive
HAFLEX drive

4. Steel Industry
BOGIFLEX CONCEPT

5. Steel Industry BLAST FURNACE Torpedo car units Bogiflex
Dryers, mills, mixers
Ermasters & Open gear sets

6. Steel Industry CONVERTERS LD Converters
Bull gears and primary reducers

7. Steel Industry CONVERTERS AOD Converters
BOGIFLEX or HAFLEX, equipped with gear locking system for blowing phase

8. Steel Industry
CONTINUOUS CASTING
Laddle crane gearboxes

9. Steel Industry CONTINUOUS CASTING Mechanical screw jacks:
(Worm gear reducers) and worm gear sets
Usually C.D. 315 / 450 mm

10. Steel Industry STRIP MILL Furnace (1260°C) Scale breaker Roughing mill
Shearing machine
Finishing mill
Strip Cooler
Coiler
Coilers: Pinion stands
Screw jacks : Worm gear reducers
Finish stands : Pinion stands
Screw jacks : Worm gear reducers
Roughing stands : Pinion stands
Walking beam furnace : Worm gear reducers

11. Steel Industry
STRIP MILL
Walking beam furnace :
Worm gear reducers

12. Steel Industry STRIP MILL Roll Screw down systems :
(Worm gear reducers) and worm gear sets
Usually 600 to 1000 mm C.D.

13. Steel Industry STRIP MILL Roughing and finishing stands :
Set of gears for stand reducers
Fabricated wheel with max dia. 4,5 m if ground
Through hardened or carburised pinion

14. Steel Industry STRIP MILL Roughing and finishing stands :
Set of gears for stand reducers
Forged carburized wheels, max dia. 3 m, in 2 parts

15. Steel Industry STRIP MILL Roughing and finishing stands :
Complete stand reducers
Compact, optimized or interchangeable with existing unit

16. Steel Industry STRIP MILL Roughing and finishing stands :
Set of pinions mounted inside exsisting housing
Max module 50
Unit weight up to 30T

17. Steel Industry STRIP MILL Roughing and finishing stands :
Complete new pinion stand
Fully intechangeable with exisitng unit
FEM calculation of housing
Carburized pinions

18. Steel Industry STRIP MILL
Shearing machine (crop shear, divide shear etc..) :
Helical or worm gearbox

19. Couplings / Flexident Steel Industry HEAVY DUTY GEAR COUPLINGS
Standard or special arrangement :
Up to above kNm

20. Steel Industry STRIP MILL Coiler / uncoiler reducer : Set of gears
Complete reducer